# Exterior Wall Covering: Building Code Definition > How the IBC 2009 define exterior wall covering, where the wording differs, and which chapters depend on the term. - Canonical: https://harth.build/resources/glossary/exterior-wall-covering/ - Last updated: 2026-09-07 - Data source: Definitions quoted from the 2009 International Codes as transcribed in this site's building-codes collection, with the source chapter linked for each quotation. Usage counts are computed over the chapters hosted here, one copy per code. The [ICC code library](https://codes.iccsafe.org/codes) publishes the current model text and the [ICC adoption maps](https://www.iccsafe.org/advocacy/code-adoption-maps/) show which edition a jurisdiction has adopted; those sources control. ## Key facts | Fact | Value | | --- | --- | | Defined in | IBC 2009 (2009 editions transcribed in this corpus) | | Primary source | IBC 2009 Exterior Walls (model text, not a jurisdiction's adopted text) | | Chapters using the term | 8 (counted across the codes hosted here) | | Wording identical across codes | Single code (compare before citing one code's wording under another) | ## Direct answer Exterior wall covering is a defined term in the International Building Code (IBC) 2009, in Exterior Walls. The code's own words are: “A material or assembly of materials applied on the exterior side of exterior walls for the purpose of providing a weather-resisting barrier, insulation or for aesthetics, including but not limited to, veneers, siding, exterior insulation and finish systems, architectural trim and embellishments such as cornices, soffits, facias, gutters and leaders.” No other I-Code in this corpus defines it, so the IBC 2009 definition is the one to work from. The term is used in 8 chapters of this corpus, most often in Exterior Walls (IBC 2009), Foundations (IRC 2009), Wall Construction (IRC 2009). These pages transcribe the 2009 model text; verify the definition against the edition and amendments your authority having jurisdiction has adopted. *Content and cited inputs reviewed by [Scott Barrington](https://nz.linkedin.com/in/barrington), Harth founder and architectural technology specialist · Published 2026-09-07 · Updated 2026-09-07.* ## What does this term mean? **Exterior Wall Covering** — IBC 2009, Exterior Walls: > A material or assembly of materials applied on the exterior side of exterior walls for the purpose of providing a weather-resisting barrier, insulation or for aesthetics, including but not limited to, veneers, siding, exterior insulation and finish systems, architectural trim and embellishments such as cornices, soffits, facias, gutters and leaders. ![Labeled code-term definition diagram: Exterior Wall Covering: Building Code Definition](https://efwwel0vyt9vy5so.public.blob.vercel-storage.com/images/glossary/exterior-wall-covering/diagram-1344.webp) *How the IBC 2009 define exterior wall covering, where the wording differs, and which chapters depend on the term.* ## What must be verified before using this guidance? **Exterior Wall Covering** is defined once in this corpus, in the [Exterior Walls](https://harth.build/resources/building-codes/us-states/maryland/ibc-2009/exterior-walls.md) chapter of the International Building Code (IBC) 2009: > A material or assembly of materials applied on the exterior side of exterior walls for the purpose of providing a weather-resisting barrier, insulation or for aesthetics, including but not limited to, veneers, siding, exterior insulation and finish systems, architectural trim and embellishments such as cornices, soffits, facias, gutters and leaders. ## Where exterior wall covering is used in the code The term appears in 8 chapters of the 2009 I-Codes hosted here. The chapters that lean on it hardest are the ones to read next. | Chapter | Code | Mentions | | --- | --- | --- | | [Exterior Walls](https://harth.build/resources/building-codes/us-states/maryland/ibc-2009/exterior-walls.md) | IBC 2009 | 31 | | [Foundations](https://harth.build/resources/building-codes/us-states/maryland/irc-2009/foundations.md) | IRC 2009 | 14 | | [Wall Construction](https://harth.build/resources/building-codes/us-states/maryland/irc-2009/wall-construction.md) | IRC 2009 | 7 | | [Wall Covering](https://harth.build/resources/building-codes/us-states/maryland/irc-2009/wall-covering.md) | IRC 2009 | 5 | | [Wood](https://harth.build/resources/building-codes/us-states/maryland/ibc-2009/wood.md) | IBC 2009 | 2 | | [Definitions](https://harth.build/resources/building-codes/us-states/maryland/ibc-2009/definitions.md) | IBC 2009 | 1 | | [Types of Construction](https://harth.build/resources/building-codes/us-states/maryland/ibc-2009/types-of-construction.md) | IBC 2009 | 1 | | [Definitions](https://harth.build/resources/building-codes/us-states/maryland/irc-2009/definitions.md) | IRC 2009 | 1 | ### The term in use How the code actually writes about exterior wall covering, quoted from the 2009 text hosted here: > Where combustible exterior wall covering is located along the top of exterior walls, such trim shall be completely backed up by the exterior wall and shall not extend over or above the top of exterior walls. — [IBC 2009 §1406.2.3](https://harth.build/resources/building-codes/us-states/maryland/ibc-2009/exterior-walls.md) > The method of attachment of exterior wall covering materials to cold-formed steel stud wall framing shall conform to the manufacturer's installation instructions. — [IRC 2009 §R603.5](https://harth.build/resources/building-codes/us-states/maryland/irc-2009/wall-construction.md) > The provisions of this chapter shall control the design and construction ofthe interior and exterior wall covering for all buildings. — [IRC 2009 §R701.1](https://harth.build/resources/building-codes/us-states/maryland/irc-2009/wall-covering.md) ## Exterior Wall Covering: what to open, and in what order Every row is a document this term depends on. The [ICC code library](https://codes.iccsafe.org/codes) and the [ICC adoption maps](https://www.iccsafe.org/advocacy/code-adoption-maps/) cover the middle rows. | Check | Where | Confirmed | | --- | --- | --- | | Read the definition in the adopted IBC | Exterior Walls | | | Re-check the requirement that uses it | Exterior Walls (IBC 2009) | | | Re-check the requirement that uses it | Foundations (IRC 2009) | | | Re-check the requirement that uses it | Wall Construction (IRC 2009) | | | Re-check the requirement that uses it | Wall Covering (IRC 2009) | | | Local amendment to any of the above | Jurisdiction's amendment list | | **A research aid, not a code determination.** The authority having jurisdiction decides which edition and which amendments apply. ## Where can you explore related guidance? - [Explore all glossary guidance](https://harth.build/resources/glossary.md) - [Exterior Wall: Building Code Definition](https://harth.build/resources/glossary/exterior-wall.md) - [Veneer: Building Code Definition](https://harth.build/resources/glossary/veneer.md) - [Backing: Building Code Definition](https://harth.build/resources/glossary/backing.md) - [Water-resistive Barrier: Building Code Definition](https://harth.build/resources/glossary/water-resistive-barrier.md) ## Sources and method Definitions quoted from the 2009 International Codes as transcribed in this site's building-codes collection, with the source chapter linked for each quotation. Usage counts are computed over the chapters hosted here, one copy per code. The [ICC code library](https://codes.iccsafe.org/codes) publishes the current model text and the [ICC adoption maps](https://www.iccsafe.org/advocacy/code-adoption-maps/) show which edition a jurisdiction has adopted; those sources control. ### Source links - [codes.iccsafe.org](https://codes.iccsafe.org/codes) - [iccsafe.org](https://www.iccsafe.org/advocacy/code-adoption-maps/) ## Frequently asked questions ### What is the code definition of exterior wall covering? The International Building Code (IBC) 2009 defines it in Exterior Walls as: “A material or assembly of materials applied on the exterior side of exterior walls for the purpose of providing a weather-resisting barrier, insulation or for aesthetics, including but not limited to, veneers, siding, exterior insulation and finish systems, architectural trim and embellishments such as cornices, soffits, facias, gutters and leaders.” The 2009 model text is reproduced here; the definition that binds your project is the one in the edition your jurisdiction has adopted, as amended locally. ### Which parts of the code depend on exterior wall covering? In this corpus the term is used across 8 chapters, led by Exterior Walls in the IBC 2009. Those are the sections whose scope moves if the definition is amended locally, so read them together with Chapter 2 rather than on their own. ### What are the requirements for exterior wall construction according to the Florida Building Code? Building is a separate defined term. The IBC 2009 defines it as: “Any structure used or intended for supporting or sheltering any use or occupancy.” That is not the same as exterior wall covering, which the IBC 2009 defines as “A material or assembly of materials applied on the exterior side of exterior walls for the purpose of providing a weather-resisting barrier, insulation or for aesthetics, including but not limited to, veneers, siding, exterior insulation and finish systems, architectural trim …” — read both before applying either, and confirm the wording in the edition your jurisdiction has adopted. --- - Continue in Harth (open this topic in the Harth agent): https://app.harth.build/agent?context=%2Fresources%2Fglossary%2Fexterior-wall-covering%2F - View this page in a browser: https://harth.build/resources/glossary/exterior-wall-covering/ - All resources for agents: https://harth.build/llms.txt