# Floor Area, Gross: Building Code Definition > How the IBC 2009, IFC 2009 define floor area, gross, where the wording differs, and which chapters depend on the term. - Canonical: https://harth.build/resources/glossary/floor-area-gross/ - Last updated: 2026-09-07 - Data source: Definitions quoted from the 2009 International Codes as transcribed in this site's building-codes collection, with the source chapter linked for each quotation. Usage counts are computed over the chapters hosted here, one copy per code. The [ICC code library](https://codes.iccsafe.org/codes) publishes the current model text and the [ICC adoption maps](https://www.iccsafe.org/advocacy/code-adoption-maps/) show which edition a jurisdiction has adopted; those sources control. ## Key facts | Fact | Value | | --- | --- | | Defined in | IBC 2009, IFC 2009 (2009 editions transcribed in this corpus) | | Primary source | IBC 2009 Means of Egress (model text, not a jurisdiction's adopted text) | | Chapters using the term | 7 (counted across the codes hosted here) | | Wording identical across codes | No (compare before citing one code's wording under another) | ## Direct answer Floor area, gross is a defined term in the International Building Code (IBC) 2009, in Means of Egress. The code's own words are: “The floor area within the inside perimeter of the exterior walls of the building under consideration, exclusive of vent shafts and courts, without deduction for corridors' stairways, closets, the thickness of interior walls, columns or other features. The floor area of a building, or portion thereof, not provided with surrounding exterior walls shall be the …” The IFC 2009 defines the same term with different wording, so the controlling text depends on which code governs the question in front of you — the comparison below sets the versions side by side. The term is used in 7 chapters of this corpus, most often in Interior Environment (IBC 2009), Means of Egress (IBC 2009), Means of Egress (IFC 2009). These pages transcribe the 2009 model text; verify the definition against the edition and amendments your authority having jurisdiction has adopted. *Content and cited inputs reviewed by [Scott Barrington](https://nz.linkedin.com/in/barrington), Harth founder and architectural technology specialist · Published 2026-09-07 · Updated 2026-09-07.* ## What does this term mean? **Floor Area, Gross** — IBC 2009, Means of Egress: > The floor area within the inside perimeter of the exterior walls of the building under consideration, exclusive of vent shafts and courts, without deduction for corridors' stairways, closets, the thickness of interior walls, columns or other features. The floor area of a building, or portion thereof, not provided with surrounding exterior walls shall be the usable area under the horizontal projection of the roof or floor above. The gross floor area shall not include shafts with no openings or interior courts. ![Labeled code-term definition diagram: Floor Area, Gross: Building Code Definition](https://efwwel0vyt9vy5so.public.blob.vercel-storage.com/images/glossary/floor-area-gross/diagram-1344.webp) *How the IBC 2009, IFC 2009 define floor area, gross, where the wording differs, and which chapters depend on the term.* ## What must be verified before using this guidance? Two of the I-Codes in this corpus define **Floor Area, Gross**, and the wording is not identical — read the version that governs your question. | Code | Where it is defined | Definition | | --- | --- | --- | | IBC 2009 | [Means of Egress](https://harth.build/resources/building-codes/us-states/maryland/ibc-2009/means-of-egress.md) | The floor area within the inside perimeter of the exterior walls of the building under consideration, exclusive of vent shafts and courts, without deduction for corridors' stairways, closets, the thickness of interior walls, columns or other features. The floor area of a building, or portion thereof, not provided with surrounding exterior walls shall be the usable area under the horizontal projection of the roof or floor above. The gross floor area shall not include shafts with no openings or interior courts. | | IFC 2009 | [Means of Egress](https://harth.build/resources/building-codes/us-states/rhode-island/ifc-2009/means-of-egress.md) | The floor area within the inside perimeter of the exterior walls ofthe building under consideration, exclusive of vent shafts and courts, without deduction for corridors' stairways, closets, the thickness of interior walls, columns or other features. The floor area of a building, or portion thereof, not provided with surrounding exterior walls shall be the usable area under the horizontal projection of the roof or floor above. The gross floor area shall not include shafts with no openings or interior courts. | ## Where floor area, gross is used in the code The term appears in 7 chapters of the 2009 I-Codes hosted here. The chapters that lean on it hardest are the ones to read next. | Chapter | Code | Mentions | | --- | --- | --- | | [Interior Environment](https://harth.build/resources/building-codes/us-states/maryland/ibc-2009/interior-environment.md) | IBC 2009 | 2 | | [Means of Egress](https://harth.build/resources/building-codes/us-states/maryland/ibc-2009/means-of-egress.md) | IBC 2009 | 2 | | [Means of Egress](https://harth.build/resources/building-codes/us-states/rhode-island/ifc-2009/means-of-egress.md) | IFC 2009 | 2 | | [Definitions](https://harth.build/resources/building-codes/us-states/maryland/ibc-2009/definitions.md) | IBC 2009 | 1 | | [Definitions](https://harth.build/resources/building-codes/us-states/rhode-island/ifc-2009/definitions.md) | IFC 2009 | 1 | | [General Regulations](https://harth.build/resources/building-codes/us-states/new-hampshire/imc-2009/general-regulations.md) | IMC 2009 | 1 | | [Building Planning](https://harth.build/resources/building-codes/us-states/maryland/irc-2009/building-planning.md) | IRC 2009 | 1 | ### The term in use How the code actually writes about floor area, gross, quoted from the 2009 text hosted here: > Room volume shall be computed using the gross floor area and the actual ceiling height up to a maximum computation height of 8 feet (2438 mm). — [IMC 2009 §303.5](https://harth.build/resources/building-codes/us-states/new-hampshire/imc-2009/general-regulations.md) > Every dwellingunit shall have at least one habitable room that shall have not less than 120 square feet (11 m2) of gross floor area. — [IRC 2009 §R304.1](https://harth.build/resources/building-codes/us-states/maryland/irc-2009/building-planning.md) ## The terms floor area, gross is built out of The definition above leans on 2 other defined terms. Each carries its own code definition, and a local amendment to any of them changes what floor area, gross covers: - **[Building](https://harth.build/resources/glossary/building.md)** — IBC 2009: Any structure used or intended for supporting or sheltering any use or occupancy. - **[Shall](https://harth.build/resources/glossary/shall.md)** — IRC 2009: The term, when used in the code, is construed as mandatory. ## Floor Area, Gross: what to open, and in what order Every row is a document this term depends on. The [ICC code library](https://codes.iccsafe.org/codes) and the [ICC adoption maps](https://www.iccsafe.org/advocacy/code-adoption-maps/) cover the middle rows. | Check | Where | Confirmed | | --- | --- | --- | | Read the definition in the adopted IBC | Means of Egress | | | Read the definition in the adopted IFC | Means of Egress | | | Re-check the requirement that uses it | Interior Environment (IBC 2009) | | | Re-check the requirement that uses it | Means of Egress (IBC 2009) | | | Re-check the requirement that uses it | Means of Egress (IFC 2009) | | | Re-check the requirement that uses it | Definitions (IBC 2009) | | | Confirm the dependent definition | Building | | | Confirm the dependent definition | Shall | | | Local amendment to any of the above | Jurisdiction's amendment list | | **A research aid, not a code determination.** The authority having jurisdiction decides which edition and which amendments apply. ## Where can you explore related guidance? - [Explore all glossary guidance](https://harth.build/resources/glossary.md) - [Building: Building Code Definition](https://harth.build/resources/glossary/building.md) - [Public Way: Building Code Definition](https://harth.build/resources/glossary/public-way.md) - [Stairway: Building Code Definition](https://harth.build/resources/glossary/stairway.md) - [Guard: Building Code Definition](https://harth.build/resources/glossary/guard.md) ## Sources and method Definitions quoted from the 2009 International Codes as transcribed in this site's building-codes collection, with the source chapter linked for each quotation. Usage counts are computed over the chapters hosted here, one copy per code. The [ICC code library](https://codes.iccsafe.org/codes) publishes the current model text and the [ICC adoption maps](https://www.iccsafe.org/advocacy/code-adoption-maps/) show which edition a jurisdiction has adopted; those sources control. ### Source links - [codes.iccsafe.org](https://codes.iccsafe.org/codes) - [iccsafe.org](https://www.iccsafe.org/advocacy/code-adoption-maps/) ## Frequently asked questions ### What is the code definition of floor area, gross? The International Building Code (IBC) 2009 defines it in Means of Egress as: “The floor area within the inside perimeter of the exterior walls of the building under consideration, exclusive of vent shafts and courts, without deduction for corridors' stairways, closets, the thickness of interior walls, columns or other features. The floor area of a building, or portion thereof, not provided with surrounding exterior walls shall be the usable area under the horizontal projection of the roof or floor above. The gross floor area shall not include shafts with no openings or interior courts.” The 2009 model text is reproduced here; the definition that binds your project is the one in the edition your jurisdiction has adopted, as amended locally. ### Which parts of the code depend on floor area, gross? In this corpus the term is used across 7 chapters, led by Interior Environment in the IBC 2009. Those are the sections whose scope moves if the definition is amended locally, so read them together with Chapter 2 rather than on their own. ### What is considered Gross Floor Area? In the 2009 I-Codes hosted here it is a defined term rather than a description. The IBC 2009 states, in Means of Egress: “The floor area within the inside perimeter of the exterior walls of the building under consideration, exclusive of vent shafts and courts, without deduction for corridors' stairways, closets, the thickness of interior walls, columns or other features. The floor area of a building, or portion thereof, not provided with surrounding exterior walls shall be the …” It is defined in IBC 2009, IFC 2009. Because it is a defined term, whatever the adopted edition says it means is what every section using it means — so check Chapter 2 of that edition and any local amendment before relying on this wording. ### What is the difference between Gross Floor Area and gross Building Area? In the 2009 I-Codes hosted here it is a defined term rather than a description. The IBC 2009 states, in Means of Egress: “The floor area within the inside perimeter of the exterior walls of the building under consideration, exclusive of vent shafts and courts, without deduction for corridors' stairways, closets, the thickness of interior walls, columns or other features. The floor area of a building, or portion thereof, not provided with surrounding exterior walls shall be the …” It is defined in IBC 2009, IFC 2009. It is not the same as Building, which the IBC 2009 defines separately as “Any structure used or intended for supporting or sheltering any use or occupancy.” Because it is a defined term, whatever the adopted edition says it means is what every section using it means — so check Chapter 2 of that edition and any local amendment before relying on this wording. --- - Continue in Harth (open this topic in the Harth agent): https://app.harth.build/agent?context=%2Fresources%2Fglossary%2Ffloor-area-gross%2F - View this page in a browser: https://harth.build/resources/glossary/floor-area-gross/ - All resources for agents: https://harth.build/llms.txt