# Horizontal Pipe: Building Code Definition > How the IRC 2009, IPC 2009 define horizontal pipe, where the wording differs, and which chapters depend on the term. - Canonical: https://harth.build/resources/glossary/horizontal-pipe/ - Last updated: 2026-09-07 - Data source: Definitions quoted from the 2009 International Codes as transcribed in this site's building-codes collection, with the source chapter linked for each quotation. Usage counts are computed over the chapters hosted here, one copy per code. The [ICC code library](https://codes.iccsafe.org/codes) publishes the current model text and the [ICC adoption maps](https://www.iccsafe.org/advocacy/code-adoption-maps/) show which edition a jurisdiction has adopted; those sources control. ## Key facts | Fact | Value | | --- | --- | | Defined in | IRC 2009, IPC 2009 (2009 editions transcribed in this corpus) | | Primary source | IRC 2009 Definitions (model text, not a jurisdiction's adopted text) | | Chapters using the term | 2 (counted across the codes hosted here) | | Wording identical across codes | Yes (compare before citing one code's wording under another) | ## Direct answer Horizontal pipe is a defined term in the International Residential Code (IRC) 2009, in Definitions. The code's own words are: “Any pipe or fitting that makes an angle of less than 45 degrees (0.79 rad) with the horizontal.” The IPC 2009 carries the same definition word for word, so the term means the same thing in each. The term is used in 2 chapters of this corpus, most often in Definitions (IPC 2009), Definitions (IRC 2009). These pages transcribe the 2009 model text; verify the definition against the edition and amendments your authority having jurisdiction has adopted. Record the jurisdiction, the adopted edition, the application date and any local amendment that rewrites the definition before you use it on a live project, because a term redefined by amendment changes every requirement that depends on it. *Content and cited inputs reviewed by [Scott Barrington](https://nz.linkedin.com/in/barrington), Harth founder and architectural technology specialist · Published 2026-09-07 · Updated 2026-09-07.* ## What does this term mean? **Horizontal Pipe** — IRC 2009, Definitions: > Any pipe or fitting that makes an angle of less than 45 degrees (0.79 rad) with the horizontal. ![Labeled code-term definition diagram: Horizontal Pipe: Building Code Definition](https://efwwel0vyt9vy5so.public.blob.vercel-storage.com/images/glossary/horizontal-pipe/diagram-1344.webp) *How the IRC 2009, IPC 2009 define horizontal pipe, where the wording differs, and which chapters depend on the term.* ## What must be verified before using this guidance? Two of the I-Codes in this corpus define **Horizontal Pipe**, in identical words. | Code | Where it is defined | Definition | | --- | --- | --- | | IRC 2009 | [Definitions](https://harth.build/resources/building-codes/us-states/maryland/irc-2009/definitions.md) | Any pipe or fitting that makes an angle of less than 45 degrees (0.79 rad) with the horizontal. | | IPC 2009 | [Definitions](https://harth.build/resources/building-codes/us-states/new-hampshire/ipc-2009/definitions.md) | Any pipe or fitting that makes an angle of less than 45 degrees (0.79 rad) with the horizontal. | ## Where horizontal pipe is used in the code The term appears in 2 chapters of the 2009 I-Codes hosted here. The chapters that lean on it hardest are the ones to read next. | Chapter | Code | Mentions | | --- | --- | --- | | [Definitions](https://harth.build/resources/building-codes/us-states/new-hampshire/ipc-2009/definitions.md) | IPC 2009 | 1 | | [Definitions](https://harth.build/resources/building-codes/us-states/maryland/irc-2009/definitions.md) | IRC 2009 | 1 | ## Horizontal Pipe compared with Vertical Pipe These two are the closest pair in the 2009 I-Codes: about 85 per cent of their defining words are the same. The code states both and compares neither, so the difference is worth naming. | | Wording unique to it | | --- | --- | | **Horizontal Pipe** (IRC 2009) | less | | [Vertical Pipe](https://harth.build/resources/glossary/vertical-pipe.md) (IRC 2009) | more | Everything else in the two definitions is shared. If a project turns on which of the two applies, those words are the whole of the test — and a local amendment that edits one of them without editing the other moves the boundary between horizontal pipe and vertical pipe. ## The terms horizontal pipe is built out of The definition above leans on 1 other defined term. Each carries its own code definition, and a local amendment to any of them changes what horizontal pipe covers: - **[Fitting](https://harth.build/resources/glossary/fitting.md)** — IRC 2009: An accessory such as a locknut, bushing or other part of a wiring system that is intended primarily to perform a mechanical rather than an electrical function. ## Horizontal Pipe: what to open, and in what order Every row is a document this term depends on. The [ICC code library](https://codes.iccsafe.org/codes) and the [ICC adoption maps](https://www.iccsafe.org/advocacy/code-adoption-maps/) cover the middle rows. | Check | Where | Confirmed | | --- | --- | --- | | Read the definition in the adopted IRC | Definitions | | | Read the definition in the adopted IPC | Definitions | | | Re-check the requirement that uses it | Definitions (IPC 2009) | | | Re-check the requirement that uses it | Definitions (IRC 2009) | | | Confirm the dependent definition | Fitting | | | Local amendment to any of the above | Jurisdiction's amendment list | | **A research aid, not a code determination.** The authority having jurisdiction decides which edition and which amendments apply. ## Where can you explore related guidance? - [Explore all glossary guidance](https://harth.build/resources/glossary.md) - [Fitting: Building Code Definition](https://harth.build/resources/glossary/fitting.md) - [Building: Building Code Definition](https://harth.build/resources/glossary/building.md) - [Construction Documents: Building Code Definition](https://harth.build/resources/glossary/construction-documents.md) - [Registered Design Professional: Building Code Definition](https://harth.build/resources/glossary/registered-design-professional.md) ## Sources and method Definitions quoted from the 2009 International Codes as transcribed in this site's building-codes collection, with the source chapter linked for each quotation. Usage counts are computed over the chapters hosted here, one copy per code. The [ICC code library](https://codes.iccsafe.org/codes) publishes the current model text and the [ICC adoption maps](https://www.iccsafe.org/advocacy/code-adoption-maps/) show which edition a jurisdiction has adopted; those sources control. ### Source links - [codes.iccsafe.org](https://codes.iccsafe.org/codes) - [iccsafe.org](https://www.iccsafe.org/advocacy/code-adoption-maps/) ## Frequently asked questions ### What is the code definition of horizontal pipe? The International Residential Code (IRC) 2009 defines it in Definitions as: “Any pipe or fitting that makes an angle of less than 45 degrees (0.79 rad) with the horizontal.” The 2009 model text is reproduced here; the definition that binds your project is the one in the edition your jurisdiction has adopted, as amended locally. ### Which parts of the code depend on horizontal pipe? In this corpus the term is used across 2 chapters, led by Definitions in the IPC 2009. Those are the sections whose scope moves if the definition is amended locally, so read them together with Chapter 2 rather than on their own. ### Is a 45° considered horizontal in plumbing? Plumbing is a separate defined term. The IRC 2009 defines it as: “For the purpose of this code, plumbing refers to those installations, repairs, maintenance and alterations regulated by Chapters 25 through 33.” That is not the same as horizontal pipe, which the IRC 2009 defines as “Any pipe or fitting that makes an angle of less than 45 degrees (0.79 rad) with the horizontal.” — read both before applying either, and confirm the wording in the edition your jurisdiction has adopted. ### What is the minimum slope required for horizontal drain pipes? Slope is a separate defined term. The IRC 2009 defines it as: “The fall (pitch) of a line of pipe in reference to a horizontal plane. In drainage, the slope is expressed as the fall in units vertical per units horizontal (percent) for a length of pipe.” That is not the same as horizontal pipe, which the IRC 2009 defines as “Any pipe or fitting that makes an angle of less than 45 degrees (0.79 rad) with the horizontal.” — read both before applying either, and confirm the wording in the edition your jurisdiction has adopted. ### What is a horizontal branch drain? Horizontal Branch Drain is a separate defined term. The IPC 2009 defines it as: “A drainage branch pipe extending laterally from a soil or waste stack or bUilding drain, with or without vertical sections or branches, that receives the discharge from two or more fixture drains or branches and conducts the discharge to the soil or waste stack or …” That is not the same as horizontal pipe, which the IRC 2009 defines as “Any pipe or fitting that makes an angle of less than 45 degrees (0.79 rad) with the horizontal.” — read both before applying either, and confirm the wording in the edition your jurisdiction has adopted. --- - Continue in Harth (open this topic in the Harth agent): https://app.harth.build/agent?context=%2Fresources%2Fglossary%2Fhorizontal-pipe%2F - View this page in a browser: https://harth.build/resources/glossary/horizontal-pipe/ - All resources for agents: https://harth.build/llms.txt