# Hot Work Equipment: Building Code Definition > How the IFC 2009 define hot work equipment, where the wording differs, and which chapters depend on the term. - Canonical: https://harth.build/resources/glossary/hot-work-equipment/ - Last updated: 2026-09-07 - Data source: Definitions quoted from the 2009 International Codes as transcribed in this site's building-codes collection, with the source chapter linked for each quotation. Usage counts are computed over the chapters hosted here, one copy per code. The [ICC code library](https://codes.iccsafe.org/codes) publishes the current model text and the [ICC adoption maps](https://www.iccsafe.org/advocacy/code-adoption-maps/) show which edition a jurisdiction has adopted; those sources control. ## Key facts | Fact | Value | | --- | --- | | Defined in | IFC 2009 (2009 editions transcribed in this corpus) | | Primary source | IFC 2009 Welding and Other Hot Work (model text, not a jurisdiction's adopted text) | | Chapters using the term | 3 (counted across the codes hosted here) | | Wording identical across codes | Single code (compare before citing one code's wording under another) | ## Direct answer Hot work equipment is a defined term in the International Fire Code (IFC) 2009, in Welding and Other Hot Work. The code's own words are: “Electric or gas welding or cutting equipment use for hot work.” No other I-Code in this corpus defines it, so the IFC 2009 definition is the one to work from. The term is used in 3 chapters of this corpus, most often in Scope and Administration (IFC 2009), Welding and Other Hot Work (IFC 2009), Definitions (IFC 2009). These pages transcribe the 2009 model text; verify the definition against the edition and amendments your authority having jurisdiction has adopted. Record the jurisdiction, the adopted edition, the application date and any local amendment that rewrites the definition before you use it on a live project, because a term redefined by amendment changes every requirement that depends on it. *Content and cited inputs reviewed by [Scott Barrington](https://nz.linkedin.com/in/barrington), Harth founder and architectural technology specialist · Published 2026-09-07 · Updated 2026-09-07.* ## What does this term mean? **Hot Work Equipment** — IFC 2009, Welding and Other Hot Work: > Electric or gas welding or cutting equipment use for hot work. ![Labeled code-term definition diagram: Hot Work Equipment: Building Code Definition](https://efwwel0vyt9vy5so.public.blob.vercel-storage.com/images/glossary/hot-work-equipment/diagram-1344.webp) *How the IFC 2009 define hot work equipment, where the wording differs, and which chapters depend on the term.* ## What must be verified before using this guidance? **Hot Work Equipment** is defined once in this corpus, in the [Welding and Other Hot Work](https://harth.build/resources/building-codes/us-states/rhode-island/ifc-2009/welding-and-other-hot-work.md) chapter of the International Fire Code (IFC) 2009: > Electric or gas welding or cutting equipment use for hot work. ## Where hot work equipment is used in the code The term appears in 3 chapters of the 2009 I-Codes hosted here. The chapters that lean on it hardest are the ones to read next. | Chapter | Code | Mentions | | --- | --- | --- | | [Scope and Administration](https://harth.build/resources/building-codes/us-states/rhode-island/ifc-2009/scope-and-administration.md) | IFC 2009 | 4 | | [Welding and Other Hot Work](https://harth.build/resources/building-codes/us-states/rhode-island/ifc-2009/welding-and-other-hot-work.md) | IFC 2009 | 4 | | [Definitions](https://harth.build/resources/building-codes/us-states/rhode-island/ifc-2009/definitions.md) | IFC 2009 | 1 | ### The term in use How the code actually writes about hot work equipment, quoted from the 2009 text hosted here: > Where the hot work area is accessible to persons other than the operator of the hot work equipment, conspicuous signs shall be posted to warn others before they enter the hot work area. — [IFC 2009 §2603.6](https://harth.build/resources/building-codes/us-states/rhode-island/ifc-2009/welding-and-other-hot-work.md) ## The terms hot work equipment is built out of The definition above leans on 2 other defined terms. Each carries its own code definition, and a local amendment to any of them changes what hot work equipment covers: - **[Equipment](https://harth.build/resources/glossary/equipment.md)** — IRC 2009: All piping, ducts, vents, control devices and other components of systems other than appliances that are permanently installed and integrated to provide control of environmental conditions for buildings. - **[Hot Work](https://harth.build/resources/glossary/hot-work.md)** — IFC 2009: Operations including cutting, welding, Thermit welding, brazing, soldering, grinding, thermal spraying, thawing pipe, installation of torch-applied roof systems or any other similar activity. ## Hot Work Equipment: what to open, and in what order Every row is a document this term depends on. The [ICC code library](https://codes.iccsafe.org/codes) and the [ICC adoption maps](https://www.iccsafe.org/advocacy/code-adoption-maps/) cover the middle rows. | Check | Where | Confirmed | | --- | --- | --- | | Read the definition in the adopted IFC | Welding and Other Hot Work | | | Re-check the requirement that uses it | Scope and Administration (IFC 2009) | | | Re-check the requirement that uses it | Welding and Other Hot Work (IFC 2009) | | | Re-check the requirement that uses it | Definitions (IFC 2009) | | | Confirm the dependent definition | Equipment | | | Confirm the dependent definition | Hot Work | | | Local amendment to any of the above | Jurisdiction's amendment list | | **A research aid, not a code determination.** The authority having jurisdiction decides which edition and which amendments apply. ## Where can you explore related guidance? - [Explore all glossary guidance](https://harth.build/resources/glossary.md) - [Equipment: Building Code Definition](https://harth.build/resources/glossary/equipment.md) - [Hot Work: Building Code Definition](https://harth.build/resources/glossary/hot-work.md) ## Sources and method Definitions quoted from the 2009 International Codes as transcribed in this site's building-codes collection, with the source chapter linked for each quotation. Usage counts are computed over the chapters hosted here, one copy per code. The [ICC code library](https://codes.iccsafe.org/codes) publishes the current model text and the [ICC adoption maps](https://www.iccsafe.org/advocacy/code-adoption-maps/) show which edition a jurisdiction has adopted; those sources control. ### Source links - [codes.iccsafe.org](https://codes.iccsafe.org/codes) - [iccsafe.org](https://www.iccsafe.org/advocacy/code-adoption-maps/) ## Frequently asked questions ### What is the code definition of hot work equipment? The International Fire Code (IFC) 2009 defines it in Welding and Other Hot Work as: “Electric or gas welding or cutting equipment use for hot work.” The 2009 model text is reproduced here; the definition that binds your project is the one in the edition your jurisdiction has adopted, as amended locally. ### Which parts of the code depend on hot work equipment? In this corpus the term is used across 3 chapters, led by Scope and Administration in the IFC 2009. Those are the sections whose scope moves if the definition is amended locally, so read them together with Chapter 2 rather than on their own. --- - Continue in Harth (open this topic in the Harth agent): https://app.harth.build/agent?context=%2Fresources%2Fglossary%2Fhot-work-equipment%2F - View this page in a browser: https://harth.build/resources/glossary/hot-work-equipment/ - All resources for agents: https://harth.build/llms.txt