# Rough-in: Building Code Definition > How the IRC 2009, IPC 2009 define rough-in, where the wording differs, and which chapters depend on the term. - Canonical: https://harth.build/resources/glossary/rough-in/ - Last updated: 2026-09-07 - Data source: Definitions quoted from the 2009 International Codes as transcribed in this site's building-codes collection, with the source chapter linked for each quotation. Usage counts are computed over the chapters hosted here, one copy per code. The [ICC code library](https://codes.iccsafe.org/codes) publishes the current model text and the [ICC adoption maps](https://www.iccsafe.org/advocacy/code-adoption-maps/) show which edition a jurisdiction has adopted; those sources control. ## Key facts | Fact | Value | | --- | --- | | Defined in | IRC 2009, IPC 2009 (2009 editions transcribed in this corpus) | | Primary source | IRC 2009 Definitions (model text, not a jurisdiction's adopted text) | | Chapters using the term | 10 (counted across the codes hosted here) | | Wording identical across codes | No (compare before citing one code's wording under another) | ## Direct answer Rough-in is a defined term in the International Residential Code (IRC) 2009, in Definitions. The code's own words are: “The installation of all parts of the plumbing system that must be completed prior to the installation of fixtures. This includes DWV, water supply and built-in fixture supports.” The IPC 2009 defines the same term with different wording, so the controlling text depends on which code governs the question in front of you — the comparison below sets the versions side by side. The term is used in 10 chapters of this corpus, most often in Scope and Administration (IPC 2009), Vents (IPC 2009), Residential Energy Efficiency (IECC 2009). These pages transcribe the 2009 model text; verify the definition against the edition and amendments your authority having jurisdiction has adopted. *Content and cited inputs reviewed by [Scott Barrington](https://nz.linkedin.com/in/barrington), Harth founder and architectural technology specialist · Published 2026-09-07 · Updated 2026-09-07.* ## What does this term mean? **Rough-in** — IRC 2009, Definitions: > The installation of all parts of the plumbing system that must be completed prior to the installation of fixtures. This includes DWV, water supply and built-in fixture supports. ![Labeled code-term definition diagram: Rough-in: Building Code Definition](https://efwwel0vyt9vy5so.public.blob.vercel-storage.com/images/glossary/rough-in/diagram-1344.webp) *How the IRC 2009, IPC 2009 define rough-in, where the wording differs, and which chapters depend on the term.* ## What must be verified before using this guidance? Two of the I-Codes in this corpus define **Rough-in**, and the wording is not identical — read the version that governs your question. | Code | Where it is defined | Definition | | --- | --- | --- | | IRC 2009 | [Definitions](https://harth.build/resources/building-codes/us-states/maryland/irc-2009/definitions.md) | The installation of all parts of the plumbing system that must be completed prior to the installation of fixtures. This includes DWV, water supply and built-in fixture supports. | | IPC 2009 | [Definitions](https://harth.build/resources/building-codes/us-states/new-hampshire/ipc-2009/definitions.md) | Parts of the plumbing system that are installed prior to the installation of fixtures. This includes drainage, water supply, vent piping and the necessary fixture supports and any fixtures that are built into the structure. | ## Where rough-in is used in the code The term appears in 10 chapters of the 2009 I-Codes hosted here. The chapters that lean on it hardest are the ones to read next. | Chapter | Code | Mentions | | --- | --- | --- | | [Scope and Administration](https://harth.build/resources/building-codes/us-states/new-hampshire/ipc-2009/scope-and-administration.md) | IPC 2009 | 3 | | [Vents](https://harth.build/resources/building-codes/us-states/new-hampshire/ipc-2009/vents.md) | IPC 2009 | 3 | | [Residential Energy Efficiency](https://harth.build/resources/building-codes/us-states/maryland/iecc-2009/residential-energy-efficiency.md) | IECC 2009 | 2 | | [Scope and Administration](https://harth.build/resources/building-codes/us-states/new-hampshire/imc-2009/scope-and-administration.md) | IMC 2009 | 2 | | [Definitions](https://harth.build/resources/building-codes/us-states/maryland/irc-2009/definitions.md) | IRC 2009 | 2 | | [Energy Efficiency](https://harth.build/resources/building-codes/us-states/maryland/irc-2009/energy-efficiency.md) | IRC 2009 | 2 | | [Sanitary Drainage](https://harth.build/resources/building-codes/us-states/maryland/irc-2009/sanitary-drainage.md) | IRC 2009 | 2 | | [Vents](https://harth.build/resources/building-codes/us-states/maryland/irc-2009/vents.md) | IRC 2009 | 2 | | [Definitions](https://harth.build/resources/building-codes/us-states/new-hampshire/ipc-2009/definitions.md) | IPC 2009 | 1 | | [Power and Lighting Distribution](https://harth.build/resources/building-codes/us-states/maryland/irc-2009/power-and-lighting-distribution.md) | IRC 2009 | 1 | ### The term in use How the code actually writes about rough-in, quoted from the 2009 text hosted here: > Where the drainage piping has been roughed-in for future fixtures, a rough-in connection for a vent shall be installed. — [IPC 2009 §905.6](https://harth.build/resources/building-codes/us-states/new-hampshire/ipc-2009/vents.md) > Dead ends shall be prohibited except where necessary to extend a cleanout or as an approvedpart of a rough-in more than 2 feet (610 mm) in length. — [IRC 2009 §P3005.1.5](https://harth.build/resources/building-codes/us-states/maryland/irc-2009/sanitary-drainage.md) > Where the drainage piping has been roughed-in for future fixtures, a rough-in connection for a vent shall be installed a minimum of one-half the diameter of the drain. — [IRC 2009 §P3104.6](https://harth.build/resources/building-codes/us-states/maryland/irc-2009/vents.md) ## The terms rough-in is built out of The definition above leans on 5 other defined terms. Each carries its own code definition, and a local amendment to any of them changes what rough-in covers: - **[Plumbing System](https://harth.build/resources/glossary/plumbing-system.md)** — IRC 2009: Includes the water supply and distribution pipes, plumbing fixtures, supports and appurtenances; soil, waste and vent pipes; sanitary drains and building sewers to an approved point of disposal. - **[Structure](https://harth.build/resources/glossary/structure.md)** — IPC 2009: That which is built or constructed or a portion thereof. - **[Plumbing](https://harth.build/resources/glossary/plumbing.md)** — IRC 2009: For the purpose of this code, plumbing refers to those installations, repairs, maintenance and alterations regulated by Chapters 25 through 33. - **[Supports](https://harth.build/resources/glossary/supports.md)** — IRC 2009: Devices for supporting, hanging and securing pipes, fixtures and equipment. - **[Piping](https://harth.build/resources/glossary/piping.md)** — IRC 2009: Where used in this code, “piping” refers to either pipe or tubing, or both. ## Rough-in: what to open, and in what order Every row is a document this term depends on. The [ICC code library](https://codes.iccsafe.org/codes) and the [ICC adoption maps](https://www.iccsafe.org/advocacy/code-adoption-maps/) cover the middle rows. | Check | Where | Confirmed | | --- | --- | --- | | Read the definition in the adopted IRC | Definitions | | | Read the definition in the adopted IPC | Definitions | | | Re-check the requirement that uses it | Scope and Administration (IPC 2009) | | | Re-check the requirement that uses it | Vents (IPC 2009) | | | Re-check the requirement that uses it | Residential Energy Efficiency (IECC 2009) | | | Re-check the requirement that uses it | Scope and Administration (IMC 2009) | | | Confirm the dependent definition | Plumbing System | | | Confirm the dependent definition | Structure | | | Confirm the dependent definition | Plumbing | | | Local amendment to any of the above | Jurisdiction's amendment list | | **A research aid, not a code determination.** The authority having jurisdiction decides which edition and which amendments apply. ## Where can you explore related guidance? - [Explore all glossary guidance](https://harth.build/resources/glossary.md) - [Plumbing System: Building Code Definition](https://harth.build/resources/glossary/plumbing-system.md) - [Structure: Building Code Definition](https://harth.build/resources/glossary/structure.md) - [Supports: Building Code Definition](https://harth.build/resources/glossary/supports.md) - [Plumbing: Building Code Definition](https://harth.build/resources/glossary/plumbing.md) ## Sources and method Definitions quoted from the 2009 International Codes as transcribed in this site's building-codes collection, with the source chapter linked for each quotation. Usage counts are computed over the chapters hosted here, one copy per code. The [ICC code library](https://codes.iccsafe.org/codes) publishes the current model text and the [ICC adoption maps](https://www.iccsafe.org/advocacy/code-adoption-maps/) show which edition a jurisdiction has adopted; those sources control. ### Source links - [codes.iccsafe.org](https://codes.iccsafe.org/codes) - [iccsafe.org](https://www.iccsafe.org/advocacy/code-adoption-maps/) ## Frequently asked questions ### What is the code definition of rough-in? The International Residential Code (IRC) 2009 defines it in Definitions as: “The installation of all parts of the plumbing system that must be completed prior to the installation of fixtures. This includes DWV, water supply and built-in fixture supports.” The 2009 model text is reproduced here; the definition that binds your project is the one in the edition your jurisdiction has adopted, as amended locally. ### Which parts of the code depend on rough-in? In this corpus the term is used across 10 chapters, led by Scope and Administration in the IPC 2009. Those are the sections whose scope moves if the definition is amended locally, so read them together with Chapter 2 rather than on their own. ### What are rough ins in a building? Building is a separate defined term. The IBC 2009 defines it as: “Any structure used or intended for supporting or sheltering any use or occupancy.” That is not the same as rough-in, which the IRC 2009 defines as “The installation of all parts of the plumbing system that must be completed prior to the installation of fixtures. This includes DWV, water supply and built-in fixture supports.” — read both before applying either, and confirm the wording in the edition your jurisdiction has adopted. ### What is considered rough-in plumbing? In the 2009 I-Codes hosted here it is a defined term rather than a description. The IRC 2009 states, in Definitions: “The installation of all parts of the plumbing system that must be completed prior to the installation of fixtures. This includes DWV, water supply and built-in fixture supports.” It is defined in IRC 2009, IPC 2009. It is not the same as Plumbing, which the IRC 2009 defines separately as “For the purpose of this code, plumbing refers to those installations, repairs, maintenance and alterations regulated by Chapters 25 through 33.” Because it is a defined term, whatever the adopted edition says it means is what every section using it means — so check Chapter 2 of that edition and any local amendment before relying on this wording. ### What does "rough-in" mean for electrical work? In the 2009 I-Codes hosted here it is a defined term rather than a description. The IRC 2009 states, in Definitions: “The installation of all parts of the plumbing system that must be completed prior to the installation of fixtures. This includes DWV, water supply and built-in fixture supports.” It is defined in IRC 2009, IPC 2009. Because it is a defined term, whatever the adopted edition says it means is what every section using it means — so check Chapter 2 of that edition and any local amendment before relying on this wording. --- - Continue in Harth (open this topic in the Harth agent): https://app.harth.build/agent?context=%2Fresources%2Fglossary%2Frough-in%2F - View this page in a browser: https://harth.build/resources/glossary/rough-in/ - All resources for agents: https://harth.build/llms.txt