# Site-fabricated Stretch System: Building Code Definition > How the IBC 2009, IFC 2009 define site-fabricated stretch system, where the wording differs, and which chapters depend on the term. - Canonical: https://harth.build/resources/glossary/site-fabricated-stretch-system/ - Last updated: 2026-09-07 - Data source: Definitions quoted from the 2009 International Codes as transcribed in this site's building-codes collection, with the source chapter linked for each quotation. Usage counts are computed over the chapters hosted here, one copy per code. The [ICC code library](https://codes.iccsafe.org/codes) publishes the current model text and the [ICC adoption maps](https://www.iccsafe.org/advocacy/code-adoption-maps/) show which edition a jurisdiction has adopted; those sources control. ## Key facts | Fact | Value | | --- | --- | | Defined in | IBC 2009, IFC 2009 (2009 editions transcribed in this corpus) | | Primary source | IBC 2009 Interior Finishes (model text, not a jurisdiction's adopted text) | | Chapters using the term | 4 (counted across the codes hosted here) | | Wording identical across codes | No (compare before citing one code's wording under another) | ## Direct answer Site-fabricated stretch system is a defined term in the International Building Code (IBC) 2009, in Interior Finishes. The code's own words are: “A system, fabricated on site and intended for acoustical, tackable or aesthetic purposes, that is comprised of three elements: (a) a frame (constructed of plastic, wood, metal or other material) used to hold fabric in place, (b) a core material (infill, with the correct properties for the application), and (c) an outside layer, comprised of …” The IFC 2009 defines the same term with different wording, so the controlling text depends on which code governs the question in front of you — the comparison below sets the versions side by side. The term is used in 4 chapters of this corpus, most often in Interior Finishes (IBC 2009), Interior Finish, Decorative Materials and Furnishings (IFC 2009), Definitions (IBC 2009). These pages transcribe the 2009 model text; verify the definition against the edition and amendments your authority having jurisdiction has adopted. *Content and cited inputs reviewed by [Scott Barrington](https://nz.linkedin.com/in/barrington), Harth founder and architectural technology specialist · Published 2026-09-07 · Updated 2026-09-07.* ## What does this term mean? **Site-fabricated Stretch System** — IBC 2009, Interior Finishes: > A system, fabricated on site and intended for acoustical, tackable or aesthetic purposes, that is comprised of three elements: (a) a frame (constructed of plastic, wood, metal or other material) used to hold fabric in place, (b) a core material (infill, with the correct properties for the application), and (c) an outside layer, comprised of a textile, fabric or vinyl, that is stretched taunt and held in place by tension or mechanical fasteners via the frame. ![Labeled code-term definition diagram: Site-fabricated Stretch System: Building Code Definition](https://efwwel0vyt9vy5so.public.blob.vercel-storage.com/images/glossary/site-fabricated-stretch-system/diagram-1344.webp) *How the IBC 2009, IFC 2009 define site-fabricated stretch system, where the wording differs, and which chapters depend on the term.* ## What must be verified before using this guidance? Two of the I-Codes in this corpus define **Site-fabricated Stretch System**, and the wording is not identical — read the version that governs your question. | Code | Where it is defined | Definition | | --- | --- | --- | | IBC 2009 | [Interior Finishes](https://harth.build/resources/building-codes/us-states/maryland/ibc-2009/interior-finishes.md) | A system, fabricated on site and intended for acoustical, tackable or aesthetic purposes, that is comprised of three elements: (a) a frame (constructed of plastic, wood, metal or other material) used to hold fabric in place, (b) a core material (infill, with the correct properties for the application), and (c) an outside layer, comprised of a textile, fabric or vinyl, that is stretched taunt and held in place by tension or mechanical fasteners via the frame. | | IFC 2009 | [Interior Finish, Decorative Materials and Furnishings](https://harth.build/resources/building-codes/us-states/rhode-island/ifc-2009/interior-finish-decorative-materials-and-furnishings.md) | A system, fabricated on site and intended for acoustical, tackable or aesthetic purposes, that is comprised of three elements: | ## Where site-fabricated stretch system is used in the code The term appears in 4 chapters of the 2009 I-Codes hosted here. The chapters that lean on it hardest are the ones to read next. | Chapter | Code | Mentions | | --- | --- | --- | | [Interior Finishes](https://harth.build/resources/building-codes/us-states/maryland/ibc-2009/interior-finishes.md) | IBC 2009 | 3 | | [Interior Finish, Decorative Materials and Furnishings](https://harth.build/resources/building-codes/us-states/rhode-island/ifc-2009/interior-finish-decorative-materials-and-furnishings.md) | IFC 2009 | 3 | | [Definitions](https://harth.build/resources/building-codes/us-states/maryland/ibc-2009/definitions.md) | IBC 2009 | 1 | | [Definitions](https://harth.build/resources/building-codes/us-states/rhode-island/ifc-2009/definitions.md) | IFC 2009 | 1 | ## The terms site-fabricated stretch system is built out of The definition above leans on 1 other defined term. Each carries its own code definition, and a local amendment to any of them changes what site-fabricated stretch system covers: - **[System](https://harth.build/resources/glossary/system.md)** — IFC 2009: An assembly of equipment consisting of a tank, container or containers, appurtenances, pumps, compressors and connecting piping. ## Site-fabricated Stretch System: what to open, and in what order Every row is a document this term depends on. The [ICC code library](https://codes.iccsafe.org/codes) and the [ICC adoption maps](https://www.iccsafe.org/advocacy/code-adoption-maps/) cover the middle rows. | Check | Where | Confirmed | | --- | --- | --- | | Read the definition in the adopted IBC | Interior Finishes | | | Read the definition in the adopted IFC | Interior Finish, Decorative Materials and Furnishings | | | Re-check the requirement that uses it | Interior Finishes (IBC 2009) | | | Re-check the requirement that uses it | Interior Finish, Decorative Materials and Furnishings (IFC 2009) | | | Re-check the requirement that uses it | Definitions (IBC 2009) | | | Re-check the requirement that uses it | Definitions (IFC 2009) | | | Confirm the dependent definition | System | | | Local amendment to any of the above | Jurisdiction's amendment list | | **A research aid, not a code determination.** The authority having jurisdiction decides which edition and which amendments apply. ## Where can you explore related guidance? - [Explore all glossary guidance](https://harth.build/resources/glossary.md) - [System: Building Code Definition](https://harth.build/resources/glossary/system.md) - [Flame Spread Index: Building Code Definition](https://harth.build/resources/glossary/flame-spread-index.md) - [Trim: Building Code Definition](https://harth.build/resources/glossary/trim.md) - [Smoke-developed Index: Building Code Definition](https://harth.build/resources/glossary/smoke-developed-index.md) ## Sources and method Definitions quoted from the 2009 International Codes as transcribed in this site's building-codes collection, with the source chapter linked for each quotation. Usage counts are computed over the chapters hosted here, one copy per code. The [ICC code library](https://codes.iccsafe.org/codes) publishes the current model text and the [ICC adoption maps](https://www.iccsafe.org/advocacy/code-adoption-maps/) show which edition a jurisdiction has adopted; those sources control. ### Source links - [codes.iccsafe.org](https://codes.iccsafe.org/codes) - [iccsafe.org](https://www.iccsafe.org/advocacy/code-adoption-maps/) ## Frequently asked questions ### What is the code definition of site-fabricated stretch system? The International Building Code (IBC) 2009 defines it in Interior Finishes as: “A system, fabricated on site and intended for acoustical, tackable or aesthetic purposes, that is comprised of three elements: (a) a frame (constructed of plastic, wood, metal or other material) used to hold fabric in place, (b) a core material (infill, with the correct properties for the application), and (c) an outside layer, comprised of a textile, fabric or vinyl, that is stretched taunt and held in place by tension or mechanical fasteners via the frame.” The 2009 model text is reproduced here; the definition that binds your project is the one in the edition your jurisdiction has adopted, as amended locally. ### Which parts of the code depend on site-fabricated stretch system? In this corpus the term is used across 4 chapters, led by Interior Finishes in the IBC 2009. Those are the sections whose scope moves if the definition is amended locally, so read them together with Chapter 2 rather than on their own. --- - Continue in Harth (open this topic in the Harth agent): https://app.harth.build/agent?context=%2Fresources%2Fglossary%2Fsite-fabricated-stretch-system%2F - View this page in a browser: https://harth.build/resources/glossary/site-fabricated-stretch-system/ - All resources for agents: https://harth.build/llms.txt