1. Log in
  2. Sign up

Aluminum

Aluminum

This chapter outlines requirements for the quality, design, fabrication, and erection of aluminum components in buildings and structures.

2001 — General

2001.1 Scope. This chapter shall govern the quality, design, fabrication and erection of aluminum.

2002 — Materials

2002.1 General. Aluminum used for structural purposes in buildings and structures shall comply with AA ASM 35 and AA ADM 1. The nominalloads shall be the minimum design loads required by Chapter 16.

Frequently asked questions

What standards govern structural aluminum in buildings?

Structural aluminum used in buildings must comply with AA ADM 35 and AA ADM 1.

What design loads should be applied to aluminum structures?

The minimum design loads for aluminum structures must conform to the requirements specified in Chapter 16 of the IBC.

What aspects of aluminum are covered by this chapter?

This chapter governs the quality, design, fabrication, and erection processes for aluminum used in construction.

Where verbatim source text is shown, it is reproduced from the code as adopted into law by the jurisdiction, sourced from public.resource.org under the government edicts doctrine (see Georgia v. Public.Resource.Org, Inc., 590 U.S. 255 (2020)). This material reflects enacted law and is provided for reference and educational purposes only. It is not legal advice and may not reflect local amendments or the most recently adopted edition. Always verify requirements with the authority having jurisdiction.