1. Log in
  2. Sign up

Cesspools

Cesspools

This chapter establishes the governing requirements for the design and installation of cesspools in plumbing systems.

1001 — General

1001.1 Scope. The provisions of this chapter shall govern the design and installation of cesspools.

1001.2 Application. Cesspools shall not be installed, except where approved by the code official. A cesspool shall be considered as only a temporary expedient pending the construction ofa public sewer; as an overflow facility where installed in conjunction with an existing cesspool; or as a means of sewage disposal for limited, minor or temporary applications.

1001.3 Construction. Cesspools shall conform to the construction requirements of Section 605.3 for seepage pits. The seepage pit shall have a minimum sidewall of 20 feet (6096 mm) below the inlet opening. Where a stratum of gravel or equally pervious material of 4 feet (1219 mm) or more in thickness is found, the sidewall need not be more than 10 feet (3048 mm) below the inlet.

Frequently asked questions

What is covered in Chapter 10 regarding cesspools?

Chapter 10 outlines the specific design and installation criteria for cesspools.

Does this code provide rules for how to build a cesspool?

Yes, this chapter governs the installation process for cesspools.

Are there specific design requirements for cesspools in this code?

Yes, the provisions of this chapter govern the design of cesspools.

Where verbatim source text is shown, it is reproduced from the code as adopted into law by the jurisdiction, sourced from public.resource.org under the government edicts doctrine (see Georgia v. Public.Resource.Org, Inc., 590 U.S. 255 (2020)). This material reflects enacted law and is provided for reference and educational purposes only. It is not legal advice and may not reflect local amendments or the most recently adopted edition. Always verify requirements with the authority having jurisdiction.