Climate & Energy Design Data
Climate Design Data: Al Sajaah, UAE
How to research climate design data for a specific site in Al Sajaah — the controlling authority, source documents, and checks to run before you rely on a number.
Last updated August 31, 2026 · Location data from the [GeoNames AE dump](https://download.geonames.org/export/dump/AE.zip) (CC BY 4.0, snapshot 2026-08-31, GeoNames ID 13118438). Regulatory starting point: [UAE Government overview of local building authorities](https://u.ae/en/information-and-services/justice-safety-and-the-law/building-safety). Figures are illustrative — verify against the current locally adopted edition for the site. Climate screening data from the [NASA POWER Climatology API documentation](https://power.larc.nasa.gov/docs/services/api/temporal/climatology/) and [exact point response](https://power.larc.nasa.gov/api/temporal/climatology/point?parameters=T2M%2CT2M_MAX%2CT2M_MIN%2CRH2M%2CPRECTOTCORR%2CWS10M&community=SB&longitude=55.63211&latitude=25.31532&format=JSON), retrieved 2026-08-31; source period: 20-year Meteorological and Solar Monthly & Annual Climatologies (January 2001 - December 2020). NASA POWER values are gridded screening statistics, not code design conditions or guaranteed local observations.
Direct answer
NASA POWER's 2001–2020 climatology at the Al Sajaah reference point reports an annual mean 2 m temperature of 28.6 °C and relative humidity of 54.1%. The highest monthly maximum is 46.1 °C in June, while the lowest monthly minimum is 10.9 °C in February; these are screening statistics, not code design temperatures. The point response uses LST and the 20-year Meteorological and Solar Monthly & Annual Climatologies (January 2001 - December 2020); its annual corrected precipitation is 0.24 mm/day and annual 10 m wind speed is 3.58 m/s. For climate design data, use the 46.1 °C and 10.9 °C monthly extrema to screen seasonal exposure, then obtain the adopted percentile design conditions. NASA POWER is gridded climatology: verify elevation, microclimate, urban exposure, station or weather-file suitability, current code edition and the authority's required source before design use.
Prepared by Harth · Harth transformed the cited NASA POWER climatology into this screening table; project design conditions and local applicability remain unreviewed · Published 2026-08-26 · Updated 2026-08-31.
What must be verified for Al Sajaah?
Al Sajaah is represented here at approximately 25.3153, 55.6321 for discovery and workflow planning. A project address, parcel, elevation, exposure, authority, and submission date must replace that city-centre reference before design use.
How should climate design data be established?
- Fix the surveyed site and local time basis.
- Select an authoritative weather source or a named solar-position algorithm.
- Record period, percentile or scenario and units.
- Test sensitivity to elevation, exposure, urban form and horizon.
- Save the source file, retrieval date and checker in the model record.
| Input | Project-specific evidence | QA question |
|---|---|---|
| Site | surveyed coordinates, elevation and horizon | Does the point represent the building? |
| Weather/solar method | named dataset, algorithm, period and time basis | Are station, time zone and units explicit? |
| Design scenario | current and future scenario agreed by the team | Is an average being mistaken for an extreme? |
| Compliance | adopted local document and edition | Was applicability confirmed with the authority? |
What are the limits of this worksheet?
This climate-design-workflow page is a project-starting worksheet, not a design value or approval. The controlling authority and qualified professionals for the Al Sajaah site remain authoritative.
Which related searches does this primary location record cover?
This primary route consolidates the location evidence needed for Climate Design Data, Weather File Guide, Overheating Weather Data, Building Climate Checklist. A narrower route should be released only when it adds a materially different official source, calculation, process, threshold or worked example.
Al Sajaah NASA POWER monthly climate screening table
| Month | Mean °C | Monthly max °C | Monthly min °C | RH % | Precipitation mm/day | Wind at 10 m m/s |
|---|---|---|---|---|---|---|
| January | 20.14 | 29.12 | 12.15 | 60.92 | 0.74 | 3.73 |
| February | 21.13 | 33.11 | 10.90 | 59.55 | 0.35 | 3.92 |
| March | 23.69 | 37.10 | 15.15 | 57.26 | 0.53 | 4.07 |
| April | 27.49 | 38.65 | 18.16 | 52.44 | 0.21 | 3.92 |
| May | 31.53 | 44.25 | 21.80 | 49.96 | 0.04 | 3.86 |
| June | 34.14 | 46.11 | 24.84 | 51.44 | 0.08 | 3.65 |
| July | 35.72 | 46.05 | 27.71 | 50.39 | 0.03 | 3.59 |
| August | 35.66 | 44.52 | 28.60 | 48.55 | 0.04 | 3.55 |
| September | 33.69 | 43.28 | 26.71 | 51.60 | 0.03 | 3.11 |
| October | 30.77 | 39.52 | 22.82 | 53.15 | 0.07 | 2.94 |
| November | 26.42 | 34.87 | 19.19 | 54.68 | 0.27 | 3.27 |
| December | 22.43 | 31.99 | 14.49 | 59.17 | 0.45 | 3.39 |
Month-by-month climate interpretation
- January: mean temperature 20.14 °C is 8.46 °C below the annual mean; the monthly max–min span is 16.97 °C. Relative humidity is 60.92% (6.85 points above annual), while corrected precipitation at 0.74 mm/day is 0.50 mm/day wetter than the annual daily rate.
- February: mean temperature 21.13 °C is 7.47 °C below the annual mean; the monthly max–min span is 22.21 °C. Relative humidity is 59.55% (5.48 points above annual), while corrected precipitation at 0.35 mm/day is 0.11 mm/day wetter than the annual daily rate.
- March: mean temperature 23.69 °C is 4.91 °C below the annual mean; the monthly max–min span is 21.95 °C. Relative humidity is 57.26% (3.19 points above annual), while corrected precipitation at 0.53 mm/day is 0.29 mm/day wetter than the annual daily rate.
- April: mean temperature 27.49 °C is 1.11 °C below the annual mean; the monthly max–min span is 20.49 °C. Relative humidity is 52.44% (1.63 points below annual), while corrected precipitation at 0.21 mm/day is 0.03 mm/day drier than the annual daily rate.
- May: mean temperature 31.53 °C is 2.93 °C above the annual mean; the monthly max–min span is 22.45 °C. Relative humidity is 49.96% (4.11 points below annual), while corrected precipitation at 0.04 mm/day is 0.20 mm/day drier than the annual daily rate.
- June: mean temperature 34.14 °C is 5.54 °C above the annual mean; the monthly max–min span is 21.27 °C. Relative humidity is 51.44% (2.63 points below annual), while corrected precipitation at 0.08 mm/day is 0.16 mm/day drier than the annual daily rate.
- July: mean temperature 35.72 °C is 7.12 °C above the annual mean; the monthly max–min span is 18.34 °C. Relative humidity is 50.39% (3.68 points below annual), while corrected precipitation at 0.03 mm/day is 0.21 mm/day drier than the annual daily rate.
- August: mean temperature 35.66 °C is 7.06 °C above the annual mean; the monthly max–min span is 15.92 °C. Relative humidity is 48.55% (5.52 points below annual), while corrected precipitation at 0.04 mm/day is 0.20 mm/day drier than the annual daily rate.
- September: mean temperature 33.69 °C is 5.09 °C above the annual mean; the monthly max–min span is 16.57 °C. Relative humidity is 51.60% (2.47 points below annual), while corrected precipitation at 0.03 mm/day is 0.21 mm/day drier than the annual daily rate.
- October: mean temperature 30.77 °C is 2.17 °C above the annual mean; the monthly max–min span is 16.70 °C. Relative humidity is 53.15% (0.92 points below annual), while corrected precipitation at 0.07 mm/day is 0.17 mm/day drier than the annual daily rate.
- November: mean temperature 26.42 °C is 2.18 °C below the annual mean; the monthly max–min span is 15.68 °C. Relative humidity is 54.68% (0.61 points above annual), while corrected precipitation at 0.27 mm/day is 0.03 mm/day wetter than the annual daily rate.
- December: mean temperature 22.43 °C is 6.17 °C below the annual mean; the monthly max–min span is 17.50 °C. Relative humidity is 59.17% (5.10 points above annual), while corrected precipitation at 0.45 mm/day is 0.21 mm/day wetter than the annual daily rate.
Harth retrieved this point climatology from NASA POWER API v2.9.7 for location record 13118438. It is a reproducible screening dataset, not an hourly weather file, forecast, code design condition or substitute for local professional review.
Where can you explore related guidance?
- Explore all climate data guidance
- Climate Design Data: Ar Rāshidīyah, UAE
- Climate Design Data: Nāyf, UAE
- Climate Design Data: As Saţwah, UAE
- Climate Design Data: Ras Al Khaimah, UAE
Sources and method
Location data from the GeoNames AE dump (CC BY 4.0, snapshot 2026-08-31, GeoNames ID 13118438). Regulatory starting point: UAE Government overview of local building authorities. Figures are illustrative — verify against the current locally adopted edition for the site. Climate screening data from the NASA POWER Climatology API documentation and exact point response, retrieved 2026-08-31; source period: 20-year Meteorological and Solar Monthly & Annual Climatologies (January 2001 - December 2020). NASA POWER values are gridded screening statistics, not code design conditions or guaranteed local observations.
Source links
Frequently asked questions
What does NASA POWER climatology show for Al Sajaah?
For the Al Sajaah reference point, the 2001–2020 NASA POWER climatology reports 28.6 °C annual mean temperature, 54.1% relative humidity and 0.24 mm/day corrected precipitation. The monthly maximum peaks at 46.1 °C in June.
Can the Al Sajaah climatology replace project design temperatures or an hourly weather file?
No. The Al Sajaah response is gridded monthly climatology; its lowest monthly minimum of 10.9 °C in February is not a code percentile or observed site extreme. Verify elevation, local exposure, the required weather file or design-condition source and the current adopted code.
Related pages
- Climate Design Data: Ahmedabad, India
Climate Design Data for Ahmedabad: source-led evidence, applicability and project QA checklist.
- Climate Design Data: Ajegunle, Nigeria
Climate Design Data for Ajegunle: source-led evidence, applicability and project QA checklist.
- Climate Design Data: Al Ain City, UAE
Climate Design Data for Al Ain City: source-led evidence, applicability and project QA checklist.
- Climate Design Data: Al Shamkhah City, UAE
Climate Design Data for Al Shamkhah City: source-led evidence, applicability and project QA checklist.
- Climate Design Data: Alexandra, South Africa
Climate Design Data for Alexandra: source-led evidence, applicability and project QA checklist.
- Climate Design Data: Alor Setar, Malaysia
Climate Design Data for Alor Setar: source-led evidence, applicability and project QA checklist.