Solar & Daylight Data

Updated 2026-09-02

Solar Shading Design: Oakville, Canada

How to research solar shading design for a specific site in Oakville — the controlling authority, source documents, and checks to run before you rely on a number.

Last updated September 2, 2026 · Location data from the [GeoNames CA dump](https://download.geonames.org/export/dump/CA.zip) (CC BY 4.0, snapshot 2026-08-31, GeoNames ID 6092122). Regulatory starting point: [Codes Canada and the applicable provincial or territorial authority](https://nrc.canada.ca/en/certifications-evaluations-standards/codes-canada/codes-canada-publications). Figures are illustrative — verify against the current locally adopted edition for the site. Solar-method context: [NOAA Solar Calculation Details](https://gml.noaa.gov/grad/solcalc/calcdetails.html); the Harth monthly table uses a simpler declination and geometric-daylight approximation whose stated limitations must be retained. Project-date refinement reference: [NREL Solar Position Algorithm](https://midcdmz.nrel.gov/spa/).

Direct answer

For Oakville at 43.4501, -79.6829, the declination-only solar-noon altitude is approximately 70.0° at the June solstice, 46.5° at an equinox and 23.1° at the December solstice. Refine these geometry checks with the project date, civil time, facade azimuth, terrain and local horizon. The reproducible location record is GeoNames ID 6092122 in administrative area 08, at 43.4501, -79.6829; replace it with the surveyed parcel point before relying on the result. As a transparent geometry check, declination-only solar-noon altitude is about 70.0° at the June solstice, 46.5° at an equinox and 23.1° at the December solstice. Representative 21st-day geometry ranges from about 8.8 hours in December to 15.2 hours in June; this excludes atmospheric refraction, terrain and obstruction effects. The cited national authority is a discovery starting point; current local documents and a named qualified reviewer control project use of this solar shading design record.

Prepared by Harth · Topic-specific calculated asset and fresh SERP brief passed editorial screening; page remains noindex pending the independent content, evidence, similarity and link gates · Published 2026-08-26 · Updated 2026-09-02.

What must be verified for Oakville?

Oakville is represented here at approximately 43.4501, -79.6829 for discovery and workflow planning. A project address, parcel, elevation, exposure, authority, and submission date must replace that city-centre reference before design use.

How should solar shading design be established?

  1. Fix the surveyed site and local time basis.
  2. Select an authoritative weather source or a named solar-position algorithm.
  3. Record period, percentile or scenario and units.
  4. Test sensitivity to elevation, exposure, urban form and horizon.
  5. Save the source file, retrieval date and checker in the model record.
InputProject-specific evidenceQA question
Sitesurveyed coordinates, elevation and horizonDoes the point represent the building?
Weather/solar methodnamed dataset, algorithm, period and time basisAre station, time zone and units explicit?
Design scenariocurrent and future scenario agreed by the teamIs an average being mistaken for an extreme?
Complianceadopted local document and editionWas applicability confirmed with the authority?

What are the limits of this worksheet?

This shading-workflow page is a project-starting worksheet, not a design value or approval. The controlling authority and qualified professionals for the Oakville site remain authoritative.

Oakville horizontal-overhang screening worksheet

Representative date09:00 altitude / P:HSolar noon altitude / P:H15:00 altitude / P:H
21 January14.19° / 3.95426.41° / 2.01314.19° / 3.954
21 February21.69° / 2.51435.32° / 1.41121.69° / 2.514
21 March30.56° / 1.69346.15° / 0.96130.56° / 1.693
21 April39.86° / 1.19858.13° / 0.62239.86° / 1.198
21 May45.95° / 0.96766.69° / 0.43145.95° / 0.967
21 June48.13° / 0.89670.00° / 0.36448.13° / 0.896
21 July46.15° / 0.96166.99° / 0.42546.15° / 0.961
21 August39.99° / 1.19258.30° / 0.61839.99° / 1.192
21 September30.72° / 1.68346.35° / 0.95430.72° / 1.683
21 October21.25° / 2.57134.80° / 1.43921.25° / 2.571
21 November13.94° / 4.03026.11° / 2.04013.94° / 4.030
21 December11.38° / 4.97023.10° / 2.34411.38° / 4.970

Oakville overhang sizing hand check

P:H is projection depth divided by the vertical facade distance to shade, calculated as 1 / tan(solar altitude). For a 1.20 m vertical target, multiply the table ratio by 1.20 m. The 09:00 and 15:00 columns use apparent solar time and show the solar-profile-plane ratio; they do not resolve facade azimuth, horizontal shadow displacement or a side-fin geometry.

The Oakville worksheet uses latitude 43.4501° and records longitude -79.6829°. A project study must replace the reference point, use the actual facade normal and obstruction mask, convert to civil time, test the full occupied period and account for diffuse sky, glazing and thermal performance. Refine solar positions with the NREL SPA.

Sources and method

Location data from the GeoNames CA dump (CC BY 4.0, snapshot 2026-08-31, GeoNames ID 6092122). Regulatory starting point: Codes Canada and the applicable provincial or territorial authority. Figures are illustrative — verify against the current locally adopted edition for the site. Solar-method context: NOAA Solar Calculation Details; the Harth monthly table uses a simpler declination and geometric-daylight approximation whose stated limitations must be retained. Project-date refinement reference: NREL Solar Position Algorithm.

Frequently asked questions

What does the solar shading design record for Oakville establish?

The solar shading design record for Oakville establishes a reproducible discovery point at 43.4501, -79.6829 (GeoNames ID 6092122, administrative area 08) and a Canada source path. It does not establish a final project value, approval or parcel decision.

What must be replaced before using this solar shading design workflow for a project in Oakville?

For the solar shading design record in Oakville, replace the 43.4501, -79.6829 city reference with the surveyed site or parcel, identify the competent local authority, and verify the current documents under National Building Code of Canada plus provincial, territorial, and municipal adoption. Record the edition, retrieval date, units, assumptions and named checker before relying on the result.

Design for your site's sun.Render it on your 3D model.