Building Code Glossary
Accreditation Body: Building Code Definition
How the IBC 2009 define accreditation body, where the wording differs, and which chapters depend on the term.
On this page
Last updated September 7, 2026 · Definitions quoted from the 2009 International Codes as transcribed in this site's building-codes collection, with the source chapter linked for each quotation. Usage counts are computed over the chapters hosted here, one copy per code. The [ICC code library](https://codes.iccsafe.org/codes) publishes the current model text and the [ICC adoption maps](https://www.iccsafe.org/advocacy/code-adoption-maps/) show which edition a jurisdiction has adopted; those sources control.
Direct answer
Accreditation body is a defined term in the International Building Code (IBC) 2009, in Wood. The code's own words are: “An approved, third-party organization that is independent of the grading and inspection agencies, and the lumber mills, and that initially accredits and subsequently monitors, on a continuing basis, the competency and performance of a grading or inspection agency related to carrying out specific tasks.” No other I-Code in this corpus defines it, so the IBC 2009 definition is the one to work from. The term is used in 7 chapters of this corpus, most often in Wood (IBC 2009), Building Planning (IRC 2009), Foundations (IRC 2009). These pages transcribe the 2009 model text; verify the definition against the edition and amendments your authority having jurisdiction has adopted.
Content and cited inputs reviewed by Scott Barrington, Harth founder and architectural technology specialist · Published 2026-09-07 · Updated 2026-09-07.
What does this term mean?
Accreditation Body — IBC 2009, Wood:
An approved, third-party organization that is independent of the grading and inspection agencies, and the lumber mills, and that initially accredits and subsequently monitors, on a continuing basis, the competency and performance of a grading or inspection agency related to carrying out specific tasks.
What must be verified before using this guidance?
Accreditation Body is defined once in this corpus, in the Wood chapter of the International Building Code (IBC) 2009:
An approved, third-party organization that is independent of the grading and inspection agencies, and the lumber mills, and that initially accredits and subsequently monitors, on a continuing basis, the competency and performance of a grading or inspection agency related to carrying out specific tasks.
Where accreditation body is used in the code
The term appears in 7 chapters of the 2009 I-Codes hosted here. The chapters that lean on it hardest are the ones to read next.
| Chapter | Code | Mentions |
|---|---|---|
| Wood | IBC 2009 | 6 |
| Building Planning | IRC 2009 | 3 |
| Foundations | IRC 2009 | 2 |
| Definitions | IBC 2009 | 1 |
| Floors | IRC 2009 | 1 |
| Roof-ceiling Construction | IRC 2009 | 1 |
| Wall Construction | IRC 2009 | 1 |
The term in use
How the code actually writes about accreditation body, quoted from the 2009 text hosted here:
Sawn lumber used for load-supporting purposes, including end-jointed or edge-glued lumber, machine stress-rated or machine-evaluated lumber, shall be identified by the grade mark of a lumber grading or inspection agency that has been approved by an accreditation body that complies with DOC PS 20 or equivalent.
Lumber and plywood required to be pressure-preservative-treated in accordance with Section R318.1 shall bear the quality markofan approvedinspection agency that maintains continuing supervision, testing and inspection over the quality of the product and that has been approved by an accreditation body that complies with the requirements of the American Lumber Standard Committee treated wood program.
All load-bearing lumber shall be identified by the grade mark of a lumber grading or inspection agency which has been approved by an accreditation body that complies with DOC PS 20.
The terms accreditation body is built out of
The definition above leans on 1 other defined term. Each carries its own code definition, and a local amendment to any of them changes what accreditation body covers:
- Approved — IBC 2009: Acceptable to the code official or authority having jurisdiction.
Accreditation Body: what to open, and in what order
Every row is a document this term depends on. The ICC code library and the ICC adoption maps cover the middle rows.
| Check | Where | Confirmed |
|---|---|---|
| Read the definition in the adopted IBC | Wood | |
| Re-check the requirement that uses it | Wood (IBC 2009) | |
| Re-check the requirement that uses it | Building Planning (IRC 2009) | |
| Re-check the requirement that uses it | Foundations (IRC 2009) | |
| Re-check the requirement that uses it | Definitions (IBC 2009) | |
| Confirm the dependent definition | Approved | |
| Local amendment to any of the above | Jurisdiction's amendment list |
A research aid, not a code determination. The authority having jurisdiction decides which edition and which amendments apply.
Where can you explore related guidance?
- Explore all glossary guidance
- Approved: Building Code Definition
- Wood Structural Panel: Building Code Definition
- Treated Wood: Building Code Definition
- Shear Wall: Building Code Definition
Sources and method
Definitions quoted from the 2009 International Codes as transcribed in this site's building-codes collection, with the source chapter linked for each quotation. Usage counts are computed over the chapters hosted here, one copy per code. The ICC code library publishes the current model text and the ICC adoption maps show which edition a jurisdiction has adopted; those sources control.
Source links
Frequently asked questions
What is the code definition of accreditation body?
The International Building Code (IBC) 2009 defines it in Wood as: “An approved, third-party organization that is independent of the grading and inspection agencies, and the lumber mills, and that initially accredits and subsequently monitors, on a continuing basis, the competency and performance of a grading or inspection agency related to carrying out specific tasks.” The 2009 model text is reproduced here; the definition that binds your project is the one in the edition your jurisdiction has adopted, as amended locally.
Which parts of the code depend on accreditation body?
In this corpus the term is used across 7 chapters, led by Wood in the IBC 2009. Those are the sections whose scope moves if the definition is amended locally, so read them together with Chapter 2 rather than on their own.
What is the definition of an accreditation body?
In the 2009 I-Codes hosted here it is a defined term rather than a description. The IBC 2009 states, in Wood: “An approved, third-party organization that is independent of the grading and inspection agencies, and the lumber mills, and that initially accredits and subsequently monitors, on a continuing basis, the competency and performance of a grading or inspection agency related to carrying out specific tasks.” It is defined in IBC 2009. Because it is a defined term, whatever the adopted edition says it means is what every section using it means — so check Chapter 2 of that edition and any local amendment before relying on this wording.
Related pages
- Accessible Route: Building Code Definition
Accessible Route — IBC 2009 definition: A continuous, unobstructed path that complies with this chapter.
- Accessible: Building Code Definition
Accessible — IBC 2009 definition: A site, building, facilityor portion thereof that complies with this chapter.
- Accessory Structure: Building Code Definition
Accessory Structure — IRC 2009 definition: A structure not greater than 3,000 square feet (279 m2) in floor area, and not over …
- Adapter Fitting: Building Code Definition
Adapter Fitting — IPC 2009 definition: An approved connecting device that suitably and properly joins or adjusts pipes and fittings which do …
- Addition: Building Code Definition
Addition — IBC 2009 definition: An extension or increase in floor area or height of a building or structure.
- Adhered Masonry Veneer: Building Code Definition
Adhered Masonry Veneer — IBC 2009 definition: Veneer secured and supported through the adhesion of an approved bonding material applied to an approved …