Updated 2026-09-07

Building Code Glossary

Bulk Hydrogen Compressed Gas System: Building Code Definition

How the IFC 2009 define bulk hydrogen compressed gas system, where the wording differs, and which chapters depend on the term.

On this page

Last updated September 7, 2026 · Definitions quoted from the 2009 International Codes as transcribed in this site's building-codes collection, with the source chapter linked for each quotation. Usage counts are computed over the chapters hosted here, one copy per code. The [ICC code library](https://codes.iccsafe.org/codes) publishes the current model text and the [ICC adoption maps](https://www.iccsafe.org/advocacy/code-adoption-maps/) show which edition a jurisdiction has adopted; those sources control.

Direct answer

Bulk hydrogen compressed gas system is a defined term in the International Fire Code (IFC) 2009, in Flammable Gases and Flammable Cryogenic Fluids. The code's own words are: “An assembly of equipment, consisting of, but not limited to, storage containers, pressure regulators, pressure relief devices, vaporizers, manifolds and piping, with a storage capacity of more than 400 ft3 (sct) (11 m3) of compressed hydrogen gas, including unconnected reserves integral to the system. The bulk system terminates at the point where the gas supply …” No other I-Code in this corpus defines it, so the IFC 2009 definition is the one to work from. The term is used in 2 chapters of this corpus, most often in Flammable Gases and Flammable Cryogenic Fluids (IFC 2009), Definitions (IFC 2009). These pages transcribe the 2009 model text; verify the definition against the edition and amendments your authority having jurisdiction has adopted.

Content and cited inputs reviewed by Scott Barrington, Harth founder and architectural technology specialist · Published 2026-09-07 · Updated 2026-09-07.

What does this term mean?

Bulk Hydrogen Compressed Gas System — IFC 2009, Flammable Gases and Flammable Cryogenic Fluids:

An assembly of equipment, consisting of, but not limited to, storage containers, pressure regulators, pressure relief devices, vaporizers, manifolds and piping, with a storage capacity of more than 400 ft3 (sct) (11 m3) of compressed hydrogen gas, including unconnected reserves integral to the system. The bulk system terminates at the point where the gas supply, at service pressure, first enters the supply line. The containers are either stationary or portable, and the gas is stored as a compressed gas.

Labeled code-term definition diagram: Bulk Hydrogen Compressed Gas System: Building Code Definition
How the IFC 2009 define bulk hydrogen compressed gas system, where the wording differs, and which chapters depend on the term.

What must be verified before using this guidance?

Bulk Hydrogen Compressed Gas System is defined once in this corpus, in the Flammable Gases and Flammable Cryogenic Fluids chapter of the International Fire Code (IFC) 2009:

An assembly of equipment, consisting of, but not limited to, storage containers, pressure regulators, pressure relief devices, vaporizers, manifolds and piping, with a storage capacity of more than 400 ft3 (sct) (11 m3) of compressed hydrogen gas, including unconnected reserves integral to the system. The bulk system terminates at the point where the gas supply, at service pressure, first enters the supply line. The containers are either stationary or portable, and the gas is stored as a compressed gas.

Where bulk hydrogen compressed gas system is used in the code

The term appears in 2 chapters of the 2009 I-Codes hosted here. The chapters that lean on it hardest are the ones to read next.

Bulk Hydrogen Compressed Gas System compared with Bulk Liquefied Hydrogen Gas System

These two are the closest pair in the 2009 I-Codes: about 78 per cent of their defining words are the same. The code states both and compares neither, so the difference is worth naming.

Wording unique to it
Bulk Hydrogen Compressed Gas System (IFC 2009)400, ft3, sct, 11, m3, compressed
Bulk Liquefied Hydrogen Gas System (IFC 2009)39, 7, gallons, 150, l, liquefied, cryogenic, fluid

Everything else in the two definitions is shared. If a project turns on which of the two applies, those words are the whole of the test — and a local amendment that edits one of them without editing the other moves the boundary between bulk hydrogen compressed gas system and bulk liquefied hydrogen gas system.

The terms bulk hydrogen compressed gas system is built out of

The definition above leans on 4 other defined terms. Each carries its own code definition, and a local amendment to any of them changes what bulk hydrogen compressed gas system covers:

  • Equipment — IRC 2009: All piping, ducts, vents, control devices and other components of systems other than appliances that are permanently installed and integrated to provide control of environmental conditions for buildings.
  • Service — IRC 2009: The conductors and equipment for delivering energy from the serving utility to the wiring system of the premises served.
  • Piping — IRC 2009: Where used in this code, “piping” refers to either pipe or tubing, or both.
  • System — IFC 2009: An assembly of equipment consisting of a tank, container or containers, appurtenances, pumps, compressors and connecting piping.

Bulk Hydrogen Compressed Gas System: what to open, and in what order

Every row is a document this term depends on. The ICC code library and the ICC adoption maps cover the middle rows.

CheckWhereConfirmed
Read the definition in the adopted IFCFlammable Gases and Flammable Cryogenic Fluids
Re-check the requirement that uses itFlammable Gases and Flammable Cryogenic Fluids (IFC 2009)
Re-check the requirement that uses itDefinitions (IFC 2009)
Confirm the dependent definitionEquipment
Confirm the dependent definitionService
Confirm the dependent definitionPiping
Local amendment to any of the aboveJurisdiction's amendment list

A research aid, not a code determination. The authority having jurisdiction decides which edition and which amendments apply.

Sources and method

Definitions quoted from the 2009 International Codes as transcribed in this site's building-codes collection, with the source chapter linked for each quotation. Usage counts are computed over the chapters hosted here, one copy per code. The ICC code library publishes the current model text and the ICC adoption maps show which edition a jurisdiction has adopted; those sources control.

Frequently asked questions

What is the code definition of bulk hydrogen compressed gas system?

The International Fire Code (IFC) 2009 defines it in Flammable Gases and Flammable Cryogenic Fluids as: “An assembly of equipment, consisting of, but not limited to, storage containers, pressure regulators, pressure relief devices, vaporizers, manifolds and piping, with a storage capacity of more than 400 ft3 (sct) (11 m3) of compressed hydrogen gas, including unconnected reserves integral to the system. The bulk system terminates at the point where the gas supply, at service pressure, first enters the supply line. The containers are either stationary or portable, and the gas is stored as a compressed gas.” The 2009 model text is reproduced here; the definition that binds your project is the one in the edition your jurisdiction has adopted, as amended locally.

Which parts of the code depend on bulk hydrogen compressed gas system?

In this corpus the term is used across 2 chapters, led by Flammable Gases and Flammable Cryogenic Fluids in the IFC 2009. Those are the sections whose scope moves if the definition is amended locally, so read them together with Chapter 2 rather than on their own.

The AI-powered workspacefor architects.