Building Code Glossary
Class 2 Circuit: Building Code Definition
How the IRC 2009 define class 2 circuit, where the wording differs, and which chapters depend on the term.
On this page
Last updated September 7, 2026 · Definitions quoted from the 2009 International Codes as transcribed in this site's building-codes collection, with the source chapter linked for each quotation. Usage counts are computed over the chapters hosted here, one copy per code. The [ICC code library](https://codes.iccsafe.org/codes) publishes the current model text and the [ICC adoption maps](https://www.iccsafe.org/advocacy/code-adoption-maps/) show which edition a jurisdiction has adopted; those sources control.
Direct answer
Class 2 circuit is a defined term in the International Residential Code (IRC) 2009, in Class 2 Remote-control, Signaling and Power-limited Circuits. The code's own words are: “That portion of the wiring system between the load side of a Class 2 power source and the connected equipment. Due to its power limitations, a Class 2 circuit considers safety from a fire initiation standpoint and provides acceptable protection from electric shock.” No other I-Code in this corpus defines it, so the IRC 2009 definition is the one to work from. The term is used in 2 chapters of this corpus, most often in Class 2 Remote-control, Signaling and Power-limited Circuits (IRC 2009), Power and Lighting Distribution (IRC 2009). These pages transcribe the 2009 model text; verify the definition against the edition and amendments your authority having jurisdiction has adopted.
Content and cited inputs reviewed by Scott Barrington, Harth founder and architectural technology specialist · Published 2026-09-07 · Updated 2026-09-07.
What does this term mean?
Class 2 Circuit — IRC 2009, Class 2 Remote-control, Signaling and Power-limited Circuits:
That portion of the wiring system between the load side of a Class 2 power source and the connected equipment. Due to its power limitations, a Class 2 circuit considers safety from a fire initiation standpoint and provides acceptable protection from electric shock.
What must be verified before using this guidance?
Class 2 Circuit is defined once in this corpus, in the Class 2 Remote-control, Signaling and Power-limited Circuits chapter of the International Residential Code (IRC) 2009:
That portion of the wiring system between the load side of a Class 2 power source and the connected equipment. Due to its power limitations, a Class 2 circuit considers safety from a fire initiation standpoint and provides acceptable protection from electric shock.
Where class 2 circuit is used in the code
The term appears in 2 chapters of the 2009 I-Codes hosted here. The chapters that lean on it hardest are the ones to read next.
| Chapter | Code | Mentions |
|---|---|---|
| Class 2 Remote-control, Signaling and Power-limited Circuits | IRC 2009 | 26 |
| Power and Lighting Distribution | IRC 2009 | 1 |
The term in use
How the code actually writes about class 2 circuit, quoted from the 2009 text hosted here:
Where Class 2 circuit conductors are in the same cable as communications circuits, the Class 2 circuits shall be classified as communications circuits and shall meet the requirements of Article 800 of nfpa 70.
The terms class 2 circuit is built out of
The definition above leans on 2 other defined terms. Each carries its own code definition, and a local amendment to any of them changes what class 2 circuit covers:
- Equipment — IRC 2009: All piping, ducts, vents, control devices and other components of systems other than appliances that are permanently installed and integrated to provide control of environmental conditions for buildings.
- System — IFC 2009: An assembly of equipment consisting of a tank, container or containers, appurtenances, pumps, compressors and connecting piping.
Class 2 Circuit: what to open, and in what order
Every row is a document this term depends on. The ICC code library and the ICC adoption maps cover the middle rows.
| Check | Where | Confirmed |
|---|---|---|
| Read the definition in the adopted IRC | Class 2 Remote-control, Signaling and Power-limited Circuits | |
| Re-check the requirement that uses it | Class 2 Remote-control, Signaling and Power-limited Circuits (IRC 2009) | |
| Re-check the requirement that uses it | Power and Lighting Distribution (IRC 2009) | |
| Confirm the dependent definition | Equipment | |
| Confirm the dependent definition | System | |
| Local amendment to any of the above | Jurisdiction's amendment list |
A research aid, not a code determination. The authority having jurisdiction decides which edition and which amendments apply.
Where can you explore related guidance?
Sources and method
Definitions quoted from the 2009 International Codes as transcribed in this site's building-codes collection, with the source chapter linked for each quotation. Usage counts are computed over the chapters hosted here, one copy per code. The ICC code library publishes the current model text and the ICC adoption maps show which edition a jurisdiction has adopted; those sources control.
Source links
Frequently asked questions
What is the code definition of class 2 circuit?
The International Residential Code (IRC) 2009 defines it in Class 2 Remote-control, Signaling and Power-limited Circuits as: “That portion of the wiring system between the load side of a Class 2 power source and the connected equipment. Due to its power limitations, a Class 2 circuit considers safety from a fire initiation standpoint and provides acceptable protection from electric shock.” The 2009 model text is reproduced here; the definition that binds your project is the one in the edition your jurisdiction has adopted, as amended locally.
Which parts of the code depend on class 2 circuit?
In this corpus the term is used across 2 chapters, led by Class 2 Remote-control, Signaling and Power-limited Circuits in the IRC 2009. Those are the sections whose scope moves if the definition is amended locally, so read them together with Chapter 2 rather than on their own.
What is a class 2 circuit?
In the 2009 I-Codes hosted here it is a defined term rather than a description. The IRC 2009 states, in Class 2 Remote-control, Signaling and Power-limited Circuits: “That portion of the wiring system between the load side of a Class 2 power source and the connected equipment. Due to its power limitations, a Class 2 circuit considers safety from a fire initiation standpoint and provides acceptable protection from electric shock.” It is defined in IRC 2009. Because it is a defined term, whatever the adopted edition says it means is what every section using it means — so check Chapter 2 of that edition and any local amendment before relying on this wording.
Related pages
- Circuit Vent: Building Code Definition
Circuit Vent — IRC 2009 definition: A vent that connects to a horizontal drainage branch and vents two traps to a maximum …
- Circulation Path: Building Code Definition
Circulation Path — IBC 2009 definition: An exterior or interior way of passage from one place to another for pedestrians.
- Cladding: Building Code Definition
Cladding — IRC 2009 definition: The exterior materials that cover the surface of the building envelope that is directly loaded by …
- Clean Agent: Building Code Definition
Clean Agent — IBC 2009 definition: Electrically nonconducting, volatile or gaseous fire extinguishant that does not leave a residue upon evaporation.
- Cleanout: Building Code Definition
Cleanout — IBC 2009 definition: An opening to the bottom of a grout space of sufficient size and spacing to allow …
- Clearance: Building Code Definition
Clearance — IRC 2009 definition: The minimum distance through air measured between the heat-producing surface of the mechanical appliance, device or …