Updated 2026-09-07

Building Code Glossary

Tie, Lateral: Building Code Definition

How the IBC 2009 define tie, lateral, where the wording differs, and which chapters depend on the term.

On this page

Last updated September 7, 2026 · Definitions quoted from the 2009 International Codes as transcribed in this site's building-codes collection, with the source chapter linked for each quotation. Usage counts are computed over the chapters hosted here, one copy per code. The [ICC code library](https://codes.iccsafe.org/codes) publishes the current model text and the [ICC adoption maps](https://www.iccsafe.org/advocacy/code-adoption-maps/) show which edition a jurisdiction has adopted; those sources control.

Direct answer

Tie, lateral is a defined term in the International Building Code (IBC) 2009, in Masonry. The code's own words are: “Loop of reinforcing bar or wire enclosing longitudinal reinforcement.” No other I-Code in this corpus defines it, so the IBC 2009 definition is the one to work from. The term is used in 4 chapters of this corpus, most often in Wall Construction (IRC 2009), Soils and Foundations (IBC 2009), Definitions (IBC 2009). These pages transcribe the 2009 model text; verify the definition against the edition and amendments your authority having jurisdiction has adopted. Record the jurisdiction, the adopted edition, the application date and any local amendment that rewrites the definition before you use it on a live project, because a term redefined by amendment changes every requirement that depends on it.

Content and cited inputs reviewed by Scott Barrington, Harth founder and architectural technology specialist · Published 2026-09-07 · Updated 2026-09-07.

What does this term mean?

Tie, Lateral — IBC 2009, Masonry:

Loop of reinforcing bar or wire enclosing longitudinal reinforcement.

Labeled code-term definition diagram: Tie, Lateral: Building Code Definition
How the IBC 2009 define tie, lateral, where the wording differs, and which chapters depend on the term.

What must be verified before using this guidance?

Tie, Lateral is defined once in this corpus, in the Masonry chapter of the International Building Code (IBC) 2009:

Loop of reinforcing bar or wire enclosing longitudinal reinforcement.

Where tie, lateral is used in the code

The term appears in 4 chapters of the 2009 I-Codes hosted here. The chapters that lean on it hardest are the ones to read next.

ChapterCodeMentions
Wall ConstructionIRC 200924
Soils and FoundationsIBC 20094
DefinitionsIBC 20091
MasonryIBC 20091

The term in use

How the code actually writes about tie, lateral, quoted from the 2009 text hosted here:

Standard hooks for lateral tie anchorage shall be either a 135-degree (2.4 rad) standard hook or a 180-degree (3.2 rad) standard hook.

IRC 2009 §R606.12.3.5

Tie, Lateral: what to open, and in what order

Every row is a document this term depends on. The ICC code library and the ICC adoption maps cover the middle rows.

CheckWhereConfirmed
Read the definition in the adopted IBCMasonry
Re-check the requirement that uses itWall Construction (IRC 2009)
Re-check the requirement that uses itSoils and Foundations (IBC 2009)
Re-check the requirement that uses itDefinitions (IBC 2009)
Re-check the requirement that uses itMasonry (IBC 2009)
Local amendment to any of the aboveJurisdiction's amendment list

A research aid, not a code determination. The authority having jurisdiction decides which edition and which amendments apply.

Sources and method

Definitions quoted from the 2009 International Codes as transcribed in this site's building-codes collection, with the source chapter linked for each quotation. Usage counts are computed over the chapters hosted here, one copy per code. The ICC code library publishes the current model text and the ICC adoption maps show which edition a jurisdiction has adopted; those sources control.

Frequently asked questions

What is the code definition of tie, lateral?

The International Building Code (IBC) 2009 defines it in Masonry as: “Loop of reinforcing bar or wire enclosing longitudinal reinforcement.” The 2009 model text is reproduced here; the definition that binds your project is the one in the edition your jurisdiction has adopted, as amended locally.

Which parts of the code depend on tie, lateral?

In this corpus the term is used across 4 chapters, led by Wall Construction in the IRC 2009. Those are the sections whose scope moves if the definition is amended locally, so read them together with Chapter 2 rather than on their own.

What is a lateral tie?

In the 2009 I-Codes hosted here it is a defined term rather than a description. The IBC 2009 states, in Masonry: “Loop of reinforcing bar or wire enclosing longitudinal reinforcement.” It is defined in IBC 2009. Because it is a defined term, whatever the adopted edition says it means is what every section using it means — so check Chapter 2 of that edition and any local amendment before relying on this wording.

The AI-powered workspacefor architects.