Updated 2026-09-07

Building Code Glossary

Incompatible Materials: Building Code Definition

How the IBC 2009, IFC 2009 define incompatible materials, where the wording differs, and which chapters depend on the term.

Get started for free

On this page

Last updated September 7, 2026 · Definitions quoted from the 2009 International Codes as transcribed in this site's building-codes collection, with the source chapter linked for each quotation. Usage counts are computed over the chapters hosted here, one copy per code. The [ICC code library](https://codes.iccsafe.org/codes) publishes the current model text and the [ICC adoption maps](https://www.iccsafe.org/advocacy/code-adoption-maps/) show which edition a jurisdiction has adopted; those sources control.

Add to Harth agentView as markdown

Direct answer

Incompatible materials is a defined term in the International Building Code (IBC) 2009, in Use and Occupancy Classification. The code's own words are: “Materials that, when mixed, have the potential to react in a manner that generates heat, fumes, gases or byproducts which are hazardous to life or property.” The IFC 2009 defines the same term with different wording, so the controlling text depends on which code governs the question in front of you — the comparison below sets the versions side by side. The term is used in 9 chapters of this corpus, most often in Hazardous Materials-general Provisions (IFC 2009), Compressed Gases (IFC 2009), Flammable and Combustible Liquids (IFC 2009). These pages transcribe the 2009 model text; verify the definition against the edition and amendments your authority having jurisdiction has adopted.

Content and cited inputs reviewed by Scott Barrington, Harth founder and architectural technology specialist · Published 2026-09-07 · Updated 2026-09-07.

What does this term mean?

Incompatible Materials — IBC 2009, Use and Occupancy Classification:

Materials that, when mixed, have the potential to react in a manner that generates heat, fumes, gases or byproducts which are hazardous to life or property.

Labeled code-term definition diagram: Incompatible Materials: Building Code Definition — How the IBC 2009, IFC 2009 define incompatible materials, where the wording differs, and which chapters depend on the term.

What must be verified before using this guidance?

Two of the I-Codes in this corpus define Incompatible Materials, and the wording is not identical — read the version that governs your question.

Code	Where it is defined	Definition
IBC 2009	Use and Occupancy Classification	Materials that, when mixed, have the potential to react in a manner that generates heat, fumes, gases or byproducts which are hazardous to life or property.
IFC 2009	Hazardous Materials-general Provisions	Materials that, when mixed, have the potential to react in a manner which generates heat, fumes, gases or byproducts which are hazardous to life or property.

Where incompatible materials is used in the code

The term appears in 9 chapters of the 2009 I-Codes hosted here. The chapters that lean on it hardest are the ones to read next.

Chapter	Code	Mentions
Hazardous Materials-general Provisions	IFC 2009	36
Compressed Gases	IFC 2009	7
Flammable and Combustible Liquids	IFC 2009	7
Use and Occupancy Classification	IBC 2009	2
Pyrophoric Materials	IFC 2009	2
Definitions	IBC 2009	1
Definitions	IFC 2009	1
Unstable (reactive) Materials	IFC 2009	1
Exhaust Systems	IMC 2009	1

The term in use

How the code actually writes about incompatible materials, quoted from the 2009 text hosted here:

Incompatible materials in storage and storage of materials that are incompatible with materials in use shall be separated when the stored materials are in containers having a capacity of more than 5 pounds (2 kg) or 0.5 gallon (2 L).

— IFC 2009 §2703.9.8

Compressed gas containers, cylinders and tanks shall be separated from incompatible materials in accordance with Section 2703.9.8.

— IFC 2009 §3003.7.1

Storage of flammable and combustible liquids shall be separated from incompatible materials in accordance with Section 2703.9.8.

— IFC 2009 §3404.2.6

Incompatible Materials: what to open, and in what order

Every row is a document this term depends on. The ICC code library and the ICC adoption maps cover the middle rows.

Check	Where	Confirmed
Read the definition in the adopted IBC	Use and Occupancy Classification
Read the definition in the adopted IFC	Hazardous Materials-general Provisions
Re-check the requirement that uses it	Hazardous Materials-general Provisions (IFC 2009)
Re-check the requirement that uses it	Compressed Gases (IFC 2009)
Re-check the requirement that uses it	Flammable and Combustible Liquids (IFC 2009)
Re-check the requirement that uses it	Use and Occupancy Classification (IBC 2009)
Local amendment to any of the above	Jurisdiction's amendment list

A research aid, not a code determination. The authority having jurisdiction decides which edition and which amendments apply.

Sources and method

Definitions quoted from the 2009 International Codes as transcribed in this site's building-codes collection, with the source chapter linked for each quotation. Usage counts are computed over the chapters hosted here, one copy per code. The ICC code library publishes the current model text and the ICC adoption maps show which edition a jurisdiction has adopted; those sources control.

Source links

Frequently asked questions

What is the code definition of incompatible materials?

The International Building Code (IBC) 2009 defines it in Use and Occupancy Classification as: “Materials that, when mixed, have the potential to react in a manner that generates heat, fumes, gases or byproducts which are hazardous to life or property.” The 2009 model text is reproduced here; the definition that binds your project is the one in the edition your jurisdiction has adopted, as amended locally.

Which parts of the code depend on incompatible materials?

In this corpus the term is used across 9 chapters, led by Hazardous Materials-general Provisions in the IFC 2009. Those are the sections whose scope moves if the definition is amended locally, so read them together with Chapter 2 rather than on their own.

What are incompatible materials?

In the 2009 I-Codes hosted here it is a defined term rather than a description. The IBC 2009 states, in Use and Occupancy Classification: “Materials that, when mixed, have the potential to react in a manner that generates heat, fumes, gases or byproducts which are hazardous to life or property.” It is defined in IBC 2009, IFC 2009. Because it is a defined term, whatever the adopted edition says it means is what every section using it means — so check Chapter 2 of that edition and any local amendment before relying on this wording.

What are the building classifications used in building codes based on?

Building is a separate defined term. The IBC 2009 defines it as: “Any structure used or intended for supporting or sheltering any use or occupancy.” That is not the same as incompatible materials, which the IBC 2009 defines as “Materials that, when mixed, have the potential to react in a manner that generates heat, fumes, gases or byproducts which are hazardous to life or property.” — read both before applying either, and confirm the wording in the edition your jurisdiction has adopted.

Related pages

The AI-powered workspacefor architects.

Get started for free Continue in Harth