Building Code Glossary
Vertical Pipe: Building Code Definition
How the IRC 2009, IPC 2009 define vertical pipe, where the wording differs, and which chapters depend on the term.
On this page
Last updated September 7, 2026 · Definitions quoted from the 2009 International Codes as transcribed in this site's building-codes collection, with the source chapter linked for each quotation. Usage counts are computed over the chapters hosted here, one copy per code. The [ICC code library](https://codes.iccsafe.org/codes) publishes the current model text and the [ICC adoption maps](https://www.iccsafe.org/advocacy/code-adoption-maps/) show which edition a jurisdiction has adopted; those sources control.
Direct answer
Vertical pipe is a defined term in the International Residential Code (IRC) 2009, in Definitions. The code's own words are: “Any pipe or fitting that makes an angle of 45 degrees (0.79 rad) or more with the horizontal.” The IPC 2009 carries the same definition word for word, so the term means the same thing in each. The term is used in 5 chapters of this corpus, most often in Definitions (IPC 2009), Vents (IPC 2009), Definitions (IRC 2009). These pages transcribe the 2009 model text; verify the definition against the edition and amendments your authority having jurisdiction has adopted. Record the jurisdiction, the adopted edition, the application date and any local amendment that rewrites the definition before you use it on a live project, because a term redefined by amendment changes every requirement that depends on it.
Content and cited inputs reviewed by Scott Barrington, Harth founder and architectural technology specialist · Published 2026-09-07 · Updated 2026-09-07.
What does this term mean?
Vertical Pipe — IRC 2009, Definitions:
Any pipe or fitting that makes an angle of 45 degrees (0.79 rad) or more with the horizontal.
What must be verified before using this guidance?
Two of the I-Codes in this corpus define Vertical Pipe, in identical words.
| Code | Where it is defined | Definition |
|---|---|---|
| IRC 2009 | Definitions | Any pipe or fitting that makes an angle of 45 degrees (0.79 rad) or more with the horizontal. |
| IPC 2009 | Definitions | Any pipe or fitting that makes an angle of 45 degrees (0.79 rad) or more with the horizontal. |
Where vertical pipe is used in the code
The term appears in 5 chapters of the 2009 I-Codes hosted here. The chapters that lean on it hardest are the ones to read next.
| Chapter | Code | Mentions |
|---|---|---|
| Definitions | IPC 2009 | 2 |
| Vents | IPC 2009 | 1 |
| Definitions | IRC 2009 | 1 |
| Fuel Gas | IRC 2009 | 1 |
| Vents | IRC 2009 | 1 |
The term in use
How the code actually writes about vertical pipe, quoted from the 2009 text hosted here:
The only vertical pipe of a combination drain and vent system shall be the connection between the fixture drain and the horizontal combination drain and vent pipe.
Vertical Pipe compared with Horizontal Pipe
These two are the closest pair in the 2009 I-Codes: about 85 per cent of their defining words are the same. The code states both and compares neither, so the difference is worth naming.
| Wording unique to it | |
|---|---|
| Vertical Pipe (IRC 2009) | more |
| Horizontal Pipe (IRC 2009) | less |
Everything else in the two definitions is shared. If a project turns on which of the two applies, those words are the whole of the test — and a local amendment that edits one of them without editing the other moves the boundary between vertical pipe and horizontal pipe.
The terms vertical pipe is built out of
The definition above leans on 1 other defined term. Each carries its own code definition, and a local amendment to any of them changes what vertical pipe covers:
- Fitting — IRC 2009: An accessory such as a locknut, bushing or other part of a wiring system that is intended primarily to perform a mechanical rather than an electrical function.
Vertical Pipe: what to open, and in what order
Every row is a document this term depends on. The ICC code library and the ICC adoption maps cover the middle rows.
| Check | Where | Confirmed |
|---|---|---|
| Read the definition in the adopted IRC | Definitions | |
| Read the definition in the adopted IPC | Definitions | |
| Re-check the requirement that uses it | Definitions (IPC 2009) | |
| Re-check the requirement that uses it | Vents (IPC 2009) | |
| Re-check the requirement that uses it | Definitions (IRC 2009) | |
| Re-check the requirement that uses it | Fuel Gas (IRC 2009) | |
| Confirm the dependent definition | Fitting | |
| Local amendment to any of the above | Jurisdiction's amendment list |
A research aid, not a code determination. The authority having jurisdiction decides which edition and which amendments apply.
Where can you explore related guidance?
- Explore all glossary guidance
- Fitting: Building Code Definition
- Building: Building Code Definition
- Construction Documents: Building Code Definition
- Registered Design Professional: Building Code Definition
Sources and method
Definitions quoted from the 2009 International Codes as transcribed in this site's building-codes collection, with the source chapter linked for each quotation. Usage counts are computed over the chapters hosted here, one copy per code. The ICC code library publishes the current model text and the ICC adoption maps show which edition a jurisdiction has adopted; those sources control.
Source links
Frequently asked questions
What is the code definition of vertical pipe?
The International Residential Code (IRC) 2009 defines it in Definitions as: “Any pipe or fitting that makes an angle of 45 degrees (0.79 rad) or more with the horizontal.” The 2009 model text is reproduced here; the definition that binds your project is the one in the edition your jurisdiction has adopted, as amended locally.
Which parts of the code depend on vertical pipe?
In this corpus the term is used across 5 chapters, led by Definitions in the IPC 2009. Those are the sections whose scope moves if the definition is amended locally, so read them together with Chapter 2 rather than on their own.
What is a vertical pipe called?
In the 2009 I-Codes hosted here it is a defined term rather than a description. The IRC 2009 states, in Definitions: “Any pipe or fitting that makes an angle of 45 degrees (0.79 rad) or more with the horizontal.” It is defined in IRC 2009, IPC 2009. Because it is a defined term, whatever the adopted edition says it means is what every section using it means — so check Chapter 2 of that edition and any local amendment before relying on this wording.
What is the IRC plumbing code?
Plumbing is a separate defined term. The IRC 2009 defines it as: “For the purpose of this code, plumbing refers to those installations, repairs, maintenance and alterations regulated by Chapters 25 through 33.” That is not the same as vertical pipe, which the IRC 2009 defines as “Any pipe or fitting that makes an angle of 45 degrees (0.79 rad) or more with the horizontal.” — read both before applying either, and confirm the wording in the edition your jurisdiction has adopted.
Related pages
- Ventilation: Building Code Definition
Ventilation — IBC 2009 definition: The natural or mechanical process of supplying conditioned or unconditioned air to, or removing such air …
- Venting System: Building Code Definition
Venting System — IRC 2009 definition: A continuous open passageway from the flue collar or draft hood of an appliance to the …
- Venting: Building Code Definition
Venting — IRC 2009 definition: Removal of combustion products to the outdoors.
- Vessel: Building Code Definition
Vessel — IFC 2009 definition: A motorized watercraft, other than a seaplane on the water, used or capable of being used …
- Vinyl Siding: Building Code Definition
Vinyl Siding — IBC 2009 definition: A shaped material, made principally from rigid polyvinyl chloride (PVC), that is used as an exterior …
- Visible Alarm Notification Appliance: Building Code Definition
Visible Alarm Notification Appliance — IBC 2009 definition: A notification appliance that alerts by the sense of sight.