Building Code Glossary
Venting System: Building Code Definition
How the IRC 2009, IMC 2009 define venting system, where the wording differs, and which chapters depend on the term.
On this page
Last updated September 7, 2026 · Definitions quoted from the 2009 International Codes as transcribed in this site's building-codes collection, with the source chapter linked for each quotation. Usage counts are computed over the chapters hosted here, one copy per code. The [ICC code library](https://codes.iccsafe.org/codes) publishes the current model text and the [ICC adoption maps](https://www.iccsafe.org/advocacy/code-adoption-maps/) show which edition a jurisdiction has adopted; those sources control.
Direct answer
Venting system is a defined term in the International Residential Code (IRC) 2009, in Fuel Gas. The code's own words are: “A continuous open passageway from the flue collar or draft hood of an appliance to the outside atmosphere for the purpose of removing flue or vent gases. A venting system is usually composed of a vent or a chimney and vent connector, if used, assembled to form the open passageway.” The IMC 2009 defines the same term with different wording, so the controlling text depends on which code governs the question in front of you — the comparison below sets the versions side by side. The term is used in 14 chapters of this corpus, most often in Fuel Gas (IRC 2009), Definitions (IRC 2009), Definitions (IMC 2009). These pages transcribe the 2009 model text; verify the definition against the edition and amendments your authority having jurisdiction has adopted.
Content and cited inputs reviewed by Scott Barrington, Harth founder and architectural technology specialist · Published 2026-09-07 · Updated 2026-09-07.
What does this term mean?
Venting System — IRC 2009, Fuel Gas:
A continuous open passageway from the flue collar or draft hood of an appliance to the outside atmosphere for the purpose of removing flue or vent gases. A venting system is usually composed of a vent or a chimney and vent connector, if used, assembled to form the open passageway.
What must be verified before using this guidance?
Two of the I-Codes in this corpus define Venting System, and the wording is not identical — read the version that governs your question.
| Code | Where it is defined | Definition |
|---|---|---|
| IRC 2009 | Fuel Gas | A continuous open passageway from the flue collar or draft hood of an appliance to the outside atmosphere for the purpose of removing flue or vent gases. A venting system is usually composed of a vent or a chimney and vent connector, if used, assembled to form the open passageway. |
| IMC 2009 | Definitions | A continuous open passageway from the flue collar of an appliance to the outside atmosphere for the purpose of removing flue or vent gases. A venting system is usually composed of a vent or a chimney and vent connector, if used, assembled to form the open passageway. |
Where venting system is used in the code
The term appears in 14 chapters of the 2009 I-Codes hosted here. The chapters that lean on it hardest are the ones to read next.
| Chapter | Code | Mentions |
|---|---|---|
| Fuel Gas | IRC 2009 | 81 |
| Definitions | IRC 2009 | 22 |
| Definitions | IMC 2009 | 19 |
| Motor Fuel-dispensing Facilities and Repair Garages | IFC 2009 | 17 |
| Chimneys and Vents | IRC 2009 | 17 |
| Chimneys and Vents | IMC 2009 | 8 |
| Vents | IPC 2009 | 3 |
| General Regulations | IMC 2009 | 2 |
| Elevators and Conveying Systems | IBC 2009 | 1 |
| Scope and Administration | IMC 2009 | 1 |
| Definitions | IPC 2009 | 1 |
| Scope and Administration | IPC 2009 | 1 |
2 further chapters mention the term.
The term in use
How the code actually writes about venting system, quoted from the 2009 text hosted here:
Where an appliance equipped with a mechanical forced draftsystem creates a positive pressure in the venting system, the venting system shall be designed for positive pressure applications.
The vent pipe used for defueling shall not be connected to another venting system used for any other purpose.
A venting system shall satisfy the draft requirements of the appliance in accordance with the manufacturer's installation instructions, and shall be constructed and installed to develop a positive flow to convey combustion products to the outside atmosphere.
The terms venting system is built out of
The definition above leans on 5 other defined terms. Each carries its own code definition, and a local amendment to any of them changes what venting system covers:
- Vent Connector — IRC 2009: That portion of a venting system which connects the flue collar or draft hood ofan appliance to a vent.
- Flue Collar — IRC 2009: The portion of a fuel-burning appliance designed for the attachment of a draft hood, vent connector or venting system.
- Draft Hood — IRC 2009: A nonadjustable device built into an appliance, or made as part of the vent connector from an appliance, that is designed to (1) provide for ready escape of the flue gases from the appliance in the event of no draft …
- Vent Gases — IRC 2009: Products of combustion from fuel-burning appliances, plus excess air and dilution air, in the venting system above the draft hood or draft regulator.
- Appliance — IRC 2009: Utilization equipment, normally built in standardized sizes or types, that is installed or connected as a unit to perform one or more functions such as clothes washing, air conditioning, food mixing, deep frying, etc.
Venting System: what to open, and in what order
Every row is a document this term depends on. The ICC code library and the ICC adoption maps cover the middle rows.
| Check | Where | Confirmed |
|---|---|---|
| Read the definition in the adopted IRC | Fuel Gas | |
| Read the definition in the adopted IMC | Definitions | |
| Re-check the requirement that uses it | Fuel Gas (IRC 2009) | |
| Re-check the requirement that uses it | Definitions (IRC 2009) | |
| Re-check the requirement that uses it | Definitions (IMC 2009) | |
| Re-check the requirement that uses it | Motor Fuel-dispensing Facilities and Repair Garages (IFC 2009) | |
| Confirm the dependent definition | Vent Connector | |
| Confirm the dependent definition | Flue Collar | |
| Confirm the dependent definition | Draft Hood | |
| Local amendment to any of the above | Jurisdiction's amendment list |
A research aid, not a code determination. The authority having jurisdiction decides which edition and which amendments apply.
Where can you explore related guidance?
- Explore all glossary guidance
- Vent Connector: Building Code Definition
- Flue Collar: Building Code Definition
- Vent Gases: Building Code Definition
- Draft Hood: Building Code Definition
Sources and method
Definitions quoted from the 2009 International Codes as transcribed in this site's building-codes collection, with the source chapter linked for each quotation. Usage counts are computed over the chapters hosted here, one copy per code. The ICC code library publishes the current model text and the ICC adoption maps show which edition a jurisdiction has adopted; those sources control.
Source links
Frequently asked questions
What is the code definition of venting system?
The International Residential Code (IRC) 2009 defines it in Fuel Gas as: “A continuous open passageway from the flue collar or draft hood of an appliance to the outside atmosphere for the purpose of removing flue or vent gases. A venting system is usually composed of a vent or a chimney and vent connector, if used, assembled to form the open passageway.” The 2009 model text is reproduced here; the definition that binds your project is the one in the edition your jurisdiction has adopted, as amended locally.
Which parts of the code depend on venting system?
In this corpus the term is used across 14 chapters, led by Fuel Gas in the IRC 2009. Those are the sections whose scope moves if the definition is amended locally, so read them together with Chapter 2 rather than on their own.
What are the building code requirements for venting in Florida?
Building is a separate defined term. The IBC 2009 defines it as: “Any structure used or intended for supporting or sheltering any use or occupancy.” That is not the same as venting system, which the IRC 2009 defines as “A continuous open passageway from the flue collar or draft hood of an appliance to the outside atmosphere for the purpose of removing flue or vent gases. A venting system is usually composed of a vent or a chimney and …” — read both before applying either, and confirm the wording in the edition your jurisdiction has adopted.
What is the purpose of a venting system?
In the 2009 I-Codes hosted here it is a defined term rather than a description. The IRC 2009 states, in Fuel Gas: “A continuous open passageway from the flue collar or draft hood of an appliance to the outside atmosphere for the purpose of removing flue or vent gases. A venting system is usually composed of a vent or a chimney and vent connector, if used, assembled to form the open passageway.” It is defined in IRC 2009, IMC 2009. Because it is a defined term, whatever the adopted edition says it means is what every section using it means — so check Chapter 2 of that edition and any local amendment before relying on this wording.
Related pages
- Ventilated: Building Code Definition
Ventilated — IRC 2009 definition: Provided with a means to permit circulation ofair sufficient to remove an excess of heat, fumes …
- Ventilation Air: Building Code Definition
Ventilation Air — IMC 2009 definition: That portion of supply air that comes from the outside (outdoors), plus any recirculated air that …
- Ventilation: Building Code Definition
Ventilation — IBC 2009 definition: The natural or mechanical process of supplying conditioned or unconditioned air to, or removing such air …
- Venting: Building Code Definition
Venting — IRC 2009 definition: Removal of combustion products to the outdoors.
- Vertical Pipe: Building Code Definition
Vertical Pipe — IRC 2009 definition: Any pipe or fitting that makes an angle of 45 degrees (0.79 rad) or more with …
- Vessel: Building Code Definition
Vessel — IFC 2009 definition: A motorized watercraft, other than a seaplane on the water, used or capable of being used …