Updated 2026-09-07

Building Code Glossary

Hardboard: Building Code Definition

How the IBC 2009 define hardboard, where the wording differs, and which chapters depend on the term.

On this page

Last updated September 7, 2026 · Definitions quoted from the 2009 International Codes as transcribed in this site's building-codes collection, with the source chapter linked for each quotation. Usage counts are computed over the chapters hosted here, one copy per code. The [ICC code library](https://codes.iccsafe.org/codes) publishes the current model text and the [ICC adoption maps](https://www.iccsafe.org/advocacy/code-adoption-maps/) show which edition a jurisdiction has adopted; those sources control.

Add to Harth agentView as markdown

Direct answer

Hardboard is a defined term in the International Building Code (IBC) 2009, in Wood. The code's own words are: “A fibrous-felted, homogeneous panel made from lignocellulosic fibers consolidated under heat and pressure in a hot press to a density not less than 31 pcf (497 kg/m3).” No other I-Code in this corpus defines it, so the IBC 2009 definition is the one to work from. The term is used in 6 chapters of this corpus, most often in Wood (IBC 2009), Exterior Walls (IBC 2009), Building Planning (IRC 2009). These pages transcribe the 2009 model text; verify the definition against the edition and amendments your authority having jurisdiction has adopted. Record the jurisdiction, the adopted edition, the application date and any local amendment that rewrites the definition before you use it on a live project, because a term redefined by amendment changes every requirement that depends on it.

Content and cited inputs reviewed by Scott Barrington, Harth founder and architectural technology specialist · Published 2026-09-07 · Updated 2026-09-07.

What does this term mean?

Hardboard — IBC 2009, Wood:

A fibrous-felted, homogeneous panel made from lignocellulosic fibers consolidated under heat and pressure in a hot press to a density not less than 31 pcf (497 kg/m3).

Labeled code-term definition diagram: Hardboard: Building Code Definition — How the IBC 2009 define hardboard, where the wording differs, and which chapters depend on the term.

What must be verified before using this guidance?

Hardboard is defined once in this corpus, in the Wood chapter of the International Building Code (IBC) 2009:

A fibrous-felted, homogeneous panel made from lignocellulosic fibers consolidated under heat and pressure in a hot press to a density not less than 31 pcf (497 kg/m3).

Where hardboard is used in the code

The term appears in 6 chapters of the 2009 I-Codes hosted here. The chapters that lean on it hardest are the ones to read next.

Chapter	Code	Mentions
Wood	IBC 2009	19
Exterior Walls	IBC 2009	9
Building Planning	IRC 2009	8
Wall Covering	IRC 2009	5
Plastic	IBC 2009	3
Definitions	IBC 2009	1

The term in use

How the code actually writes about hardboard, quoted from the 2009 text hosted here:

Hardboard siding used structurally shall be identified by an approved agency conforming to CPA/ANSI AI35.6.

— IBC 2009 §2303.1.6

Basic hardboard shall conform to the requirements of AHA AI35.4.

— IBC 2009 §1404.3.1

Wood veneer paneling and hardboard paneling shall be placed on wood or cold-formed steel framing spaced not more than 16 inches (406 mm) on center.

— IRC 2009 §R702.5

¼-inch-thick (6.4 mm) wood structural panel, particleboard or hardboard;

— IBC 2009 §2603.4.1.6

Hardboard: what to open, and in what order

Every row is a document this term depends on. The ICC code library and the ICC adoption maps cover the middle rows.

Check	Where	Confirmed
Read the definition in the adopted IBC	Wood
Re-check the requirement that uses it	Wood (IBC 2009)
Re-check the requirement that uses it	Exterior Walls (IBC 2009)
Re-check the requirement that uses it	Building Planning (IRC 2009)
Re-check the requirement that uses it	Wall Covering (IRC 2009)
Local amendment to any of the above	Jurisdiction's amendment list

A research aid, not a code determination. The authority having jurisdiction decides which edition and which amendments apply.

Sources and method

Definitions quoted from the 2009 International Codes as transcribed in this site's building-codes collection, with the source chapter linked for each quotation. Usage counts are computed over the chapters hosted here, one copy per code. The ICC code library publishes the current model text and the ICC adoption maps show which edition a jurisdiction has adopted; those sources control.

Source links

Frequently asked questions

What is the code definition of hardboard?

The International Building Code (IBC) 2009 defines it in Wood as: “A fibrous-felted, homogeneous panel made from lignocellulosic fibers consolidated under heat and pressure in a hot press to a density not less than 31 pcf (497 kg/m3).” The 2009 model text is reproduced here; the definition that binds your project is the one in the edition your jurisdiction has adopted, as amended locally.

Which parts of the code depend on hardboard?

In this corpus the term is used across 6 chapters, led by Wood in the IBC 2009. Those are the sections whose scope moves if the definition is amended locally, so read them together with Chapter 2 rather than on their own.

What is the definition of hardboard?

In the 2009 I-Codes hosted here it is a defined term rather than a description. The IBC 2009 states, in Wood: “A fibrous-felted, homogeneous panel made from lignocellulosic fibers consolidated under heat and pressure in a hot press to a density not less than 31 pcf (497 kg/m3).” It is defined in IBC 2009. Because it is a defined term, whatever the adopted edition says it means is what every section using it means — so check Chapter 2 of that edition and any local amendment before relying on this wording.

Related pages

The AI-powered workspacefor architects.

Get started for free Continue in Harth