Updated 2026-10-01

US Building Code Adoption by State

Oregon Building Code: Which Editions Are Adopted

Which I-Code editions Oregon is recorded as adopting, what the record does not cover, and how to confirm the edition governing a project.

On this page

Last updated October 1, 2026 · Adopted editions transcribed from the [ICC Master I-Code Adoption Chart (January 2024)](https://www.iccsafe.org/wp-content/uploads/Master-I-Code-Adoption-Chart-1.pdf), reproduced with the chart's own legend so an “X” is not mistaken for a statewide adoption. ICC notes that not all jurisdictions report their adoptions and publishes updates at [iccsafe.org/adoptions](https://www.iccsafe.org/adoptions). The current edition, its effective date and the state amendments are published by [Oregon Building Codes Division](https://www.oregon.gov/bcd/codes-stand/Pages/adopted-codes.aspx), which controls.

Direct answer

2025 Oregon Structural Specialty Code and 2026 Oregon Residential Specialty Code, both based on the 2024 I-Codes in Oregon. Oregon writes its own statewide specialty codes: the 2025 OSSC is built on the 2024 IBC, IFC and IEBC, the 2026 ORSC on the 2024 IRC, and the 2025 Oregon Energy Efficiency Specialty Code on ASHRAE 90.1-2022. The 2025 OSSC took effect on 1 October 2025 and became mandatory on 1 April 2026. The 2026 ORSC takes effect on 1 October 2026; Chapter 1 applies immediately, and until 31 March 2027 applicants may use either the 2023 ORSC (2021 IRC basis) or the 2026 ORSC. A 2026 Oregon Residential Reach Code is planned for 1 April 2027. This was checked on 2026-10-01 against Oregon Building Codes Division, which is the source that controls. The cross-state comparison further down this page comes from the ICC adoption chart dated January 2024, so where the two disagree the record above is the newer one.

Content and cited inputs reviewed by Harth team · Published 2026-09-07 · Updated 2026-10-01.

Code-adoption status diagram: Oregon Building Code: Which Editions Are Adopted
Which I-Code editions Oregon is recorded as adopting, what the record does not cover, and how to confirm the edition governing a project.

Which codes has Oregon adopted now?

2025 Oregon Structural Specialty Code and 2026 Oregon Residential Specialty Code, both based on the 2024 I-Codes.

Oregon writes its own statewide specialty codes: the 2025 OSSC is built on the 2024 IBC, IFC and IEBC, the 2026 ORSC on the 2024 IRC, and the 2025 Oregon Energy Efficiency Specialty Code on ASHRAE 90.1-2022.

DisciplineAdopted
Commercial building2025 Oregon Structural Specialty Code (2024 IBC basis)
Residential2026 Oregon Residential Specialty Code (2024 IRC basis), with the 2023 ORSC usable until 31 March 2027
Commercial energy2025 Oregon Energy Efficiency Specialty Code (ASHRAE 90.1-2022 basis)
Residential energyOregon-written energy provisions in Chapter 11 of the ORSC
Fire2025 Oregon Fire Code (2024 IFC basis)
Electrical2023 Oregon Electrical Specialty Code (2023 NEC basis)

Transition: The 2025 OSSC took effect on 1 October 2025 and became mandatory on 1 April 2026. The 2026 ORSC takes effect on 1 October 2026; Chapter 1 applies immediately, and until 31 March 2027 applicants may use either the 2023 ORSC (2021 IRC basis) or the 2026 ORSC. A 2026 Oregon Residential Reach Code is planned for 1 April 2027.

Checked 2026-10-01 against Oregon Building Codes Division. Confirm the edition and effective date for the specific permit jurisdiction before relying on it.

The cross-state record

For comparison across states, every I-Code the ICC Master I-Code Adoption Chart (January 2024) tracks, as it records Oregon. Where this disagrees with the record above, the record above is newer:

CodeRecorded adoption
International Building Code (IBC)2021
International Residential Code (IRC)2021
International Fire Code (IFC)2021
International Mechanical Code (IMC)2021
International Plumbing Code (IPC)Not adopted
International Private Sewage Disposal Code (IPSDC)Not adopted
International Fuel Gas Code (IFGC)2021
International Green Construction Code (IgCC)Not adopted
International Energy Conservation Code — Residential (IECC-R)2021
International Energy Conservation Code — Commercial (IECC-C)ASHRAE 90.1-2010
International Property Maintenance Code (IPMC)Not adopted
International Existing Building Code (IEBC)Not adopted
International Swimming Pool and Spa Code (ISPSC)Not adopted
ICC Performance Code (ICCPC)Not adopted
International Wildland-Urban Interface Code (IWUIC)Some jurisdictions only
International Zoning Code (IZC)Not adopted
ICC 700 National Green Building Standard (ICC 700)Not adopted

Oregon has a recorded edition year for 6 of the 17 codes: 2021 for the building, residential, fire, mechanical, fuel gas and residential energy codes. The wildland-urban interface code appears as adopted by individual state or local agencies rather than as a statewide standard, so whether it applies depends on the permit jurisdiction for the project address. For the commercial energy code the chart records ASHRAE 90.1-2010 in place of an IECC edition. No adoption at all is recorded for the plumbing, private sewage, green construction, property maintenance, existing buildings, swimming pool and spa, performance, zoning and green building standard codes.

Source: ICC Master I-Code Adoption Chart (January 2024).

How Oregon compares with its neighbours

StateBuilding (IBC)Residential (IRC)Residential energy (IECC-R)
Oregon2024*2024*State code
Washington202120212021*
California2024*2024*State code
Idaho2018 (limited)2018 (limited)2018 (limited)
Nevada2024 (limited)2024 (limited)2024

Statewide editions in force, checked 2026-10-01; “Local” means no state adoption, “(limited)” a state adoption for some buildings only, and * a state-titled code built on that edition.

Washington, Idaho and Nevada differ from Oregon on the building code alone. A practice working across that border is working to two editions, whatever the office standard says.

Where Oregon sits in the national record

Of the 50 states and the District of Columbia, 10 enforce the 2024 IBC statewide, 0 a later edition, 24 an earlier one, and 17 have no statewide IBC edition in force. Oregon is at or ahead of the national middle on the building code, so the risk runs the other way: work arriving from a slower-moving state may be drawn to an older edition.

Oregon is one of 15 jurisdictions with no statewide residential energy code based on an IECC edition in force, so the energy question is answered by the state's own document or by the local jurisdiction.

Across all 17 codes the January 2024 ICC chart tracks, Oregon has a recorded edition for 6, which ranked it 31st of 51. A low count is not a gap in regulation — it usually means the state legislates through its own documents, or leaves the discipline to local adoption.

What the chart does and does not tell you

The chart's own legend matters more than the numbers:

  • An edition year means one or more state or local agencies adopted that edition. It does not mean every building in the state is designed to it.
  • “Some jurisdictions only” is the chart's X: the code is in use somewhere in the state but is not the standard for all buildings.
  • “Not adopted” is a blank cell — no state or local jurisdiction reported adopting that code.
  • “State-written code” means the state publishes its own document in place of the model edition, so the model text is a reference, not the law.

ICC states plainly that not every jurisdiction notifies it of an adoption, and this chart is dated January 2024. Treat it as the starting point for a search, never as the answer.

How to confirm the edition that governs a Oregon project

  1. Open Oregon Building Codes Division and find the currently adopted code list with its effective date.
  2. Check whether the permit authority for the project address is the state or a local programme with its own adoption.
  3. Read the state amendments alongside the model edition — an amended table or definition changes the requirement even when the edition matches.
  4. Record the permit application date. A code change usually applies from an effective date, and applications filed before it are normally reviewed under the previous edition.
  5. Get the answer in writing from the authority having jurisdiction before it drives a design decision.

Oregon code-basis worksheet

Fill this in once per project and keep it with the drawing set. Every row is a question a plan reviewer can ask, and the answer changes with the address and the application date, not with the state.

ItemProject entry
Project address and permit jurisdiction
State programme or local programme as AHJ
Building / residential edition and effective date
Energy code edition (or state-written code)
Fire, mechanical, plumbing and fuel-gas editions
Accessibility standard and edition
State amendments consulted (citation)
Local amendments consulted (citation)
Permit application date and vesting rule
Written AHJ confirmation (date, name)

This worksheet records a determination; it does not make one. The authority having jurisdiction decides which edition and which amendments apply.

Sources and method

Adopted editions transcribed from the ICC Master I-Code Adoption Chart (January 2024), reproduced with the chart's own legend so an “X” is not mistaken for a statewide adoption. ICC notes that not all jurisdictions report their adoptions and publishes updates at iccsafe.org/adoptions. The current edition, its effective date and the state amendments are published by Oregon Building Codes Division, which controls.

Frequently asked questions

Which building code edition does Oregon use?

2025 Oregon Structural Specialty Code and 2026 Oregon Residential Specialty Code, both based on the 2024 I-Codes. Oregon writes its own statewide specialty codes: the 2025 OSSC is built on the 2024 IBC, IFC and IEBC, the 2026 ORSC on the 2024 IRC, and the 2025 Oregon Energy Efficiency Specialty Code on ASHRAE 90.1-2022. This was checked on 2026-10-01 against Oregon Building Codes Division; confirm the edition and effective date for the permit jurisdiction before relying on it.

How current is this record?

The adoption above was checked on 2026-10-01 against Oregon Building Codes Division, the source that controls. The cross-state table comes from the ICC Master I-Code Adoption Chart (January 2024), which is older, so where the two disagree the checked record is the one to use.

The AI-powered workspacefor architects.