Updated 2026-09-07

Building Code Glossary

Elevator Group: Building Code Definition

How the IBC 2009, IFC 2009 define elevator group, where the wording differs, and which chapters depend on the term.

On this page

Last updated September 7, 2026 · Definitions quoted from the 2009 International Codes as transcribed in this site's building-codes collection, with the source chapter linked for each quotation. Usage counts are computed over the chapters hosted here, one copy per code. The [ICC code library](https://codes.iccsafe.org/codes) publishes the current model text and the [ICC adoption maps](https://www.iccsafe.org/advocacy/code-adoption-maps/) show which edition a jurisdiction has adopted; those sources control.

Direct answer

Elevator group is a defined term in the International Building Code (IBC) 2009, in Fire Protection Systems. The code's own words are: “A grouping of elevators in a building located adjacent or directly across from one another that responds to a common hall call button(s).” The IFC 2009 defines the same term with different wording, so the controlling text depends on which code governs the question in front of you — the comparison below sets the versions side by side. The term is used in 4 chapters of this corpus, most often in Fire Protection Systems (IBC 2009), Fire Protection Systems (IFC 2009), Definitions (IBC 2009). These pages transcribe the 2009 model text; verify the definition against the edition and amendments your authority having jurisdiction has adopted.

Content and cited inputs reviewed by Scott Barrington, Harth founder and architectural technology specialist · Published 2026-09-07 · Updated 2026-09-07.

What does this term mean?

Elevator Group — IBC 2009, Fire Protection Systems:

A grouping of elevators in a building located adjacent or directly across from one another that responds to a common hall call button(s).

Labeled code-term definition diagram: Elevator Group: Building Code Definition
How the IBC 2009, IFC 2009 define elevator group, where the wording differs, and which chapters depend on the term.

What must be verified before using this guidance?

Two of the I-Codes in this corpus define Elevator Group, and the wording is not identical — read the version that governs your question.

CodeWhere it is definedDefinition
IBC 2009Fire Protection SystemsA grouping of elevators in a building located adjacent or directly across from one another that responds to a common hall call button(s).
IFC 2009Fire Protection SystemsA grouping of elevators in a building located adjacent or directly across from one another that respond to a common hall call button(s).

Where elevator group is used in the code

The term appears in 4 chapters of the 2009 I-Codes hosted here. The chapters that lean on it hardest are the ones to read next.

ChapterCodeMentions
Fire Protection SystemsIBC 20094
Fire Protection SystemsIFC 20094
DefinitionsIBC 20091
DefinitionsIFC 20091

The terms elevator group is built out of

The definition above leans on 1 other defined term. Each carries its own code definition, and a local amendment to any of them changes what elevator group covers:

  • Building — IBC 2009: Any structure used or intended for supporting or sheltering any use or occupancy.

Elevator Group: what to open, and in what order

Every row is a document this term depends on. The ICC code library and the ICC adoption maps cover the middle rows.

CheckWhereConfirmed
Read the definition in the adopted IBCFire Protection Systems
Read the definition in the adopted IFCFire Protection Systems
Re-check the requirement that uses itFire Protection Systems (IBC 2009)
Re-check the requirement that uses itFire Protection Systems (IFC 2009)
Re-check the requirement that uses itDefinitions (IBC 2009)
Re-check the requirement that uses itDefinitions (IFC 2009)
Confirm the dependent definitionBuilding
Local amendment to any of the aboveJurisdiction's amendment list

A research aid, not a code determination. The authority having jurisdiction decides which edition and which amendments apply.

Sources and method

Definitions quoted from the 2009 International Codes as transcribed in this site's building-codes collection, with the source chapter linked for each quotation. Usage counts are computed over the chapters hosted here, one copy per code. The ICC code library publishes the current model text and the ICC adoption maps show which edition a jurisdiction has adopted; those sources control.

Frequently asked questions

What is the code definition of elevator group?

The International Building Code (IBC) 2009 defines it in Fire Protection Systems as: “A grouping of elevators in a building located adjacent or directly across from one another that responds to a common hall call button(s).” The 2009 model text is reproduced here; the definition that binds your project is the one in the edition your jurisdiction has adopted, as amended locally.

What is a group R-1 occupancy?

Occupancy is a separate defined term. The IMC 2009 defines it as: “The purpose for which a building, or portion thereof, is utilized or occupied.” That is not the same as elevator group, which the IBC 2009 defines as “A grouping of elevators in a building located adjacent or directly across from one another that responds to a common hall call button(s).” — read both before applying either, and confirm the wording in the edition your jurisdiction has adopted.

The AI-powered workspacefor architects.