Solar & Daylight Data

Updated 2026-08-31

Sun Path: Bendigo, Australia

How to research sun path for a specific site in Bendigo — the controlling authority, source documents, and checks to run before you rely on a number.

Last updated August 31, 2026 · Location data from the [GeoNames AU dump](https://download.geonames.org/export/dump/AU.zip) (CC BY 4.0, snapshot 2026-08-31, GeoNames ID 2176187). Regulatory starting point: [Australian Building Codes Board and the applicable state or territory authority](https://ncc.abcb.gov.au/). Figures are illustrative — verify against the current locally adopted edition for the site. Solar-method context: [NOAA Solar Calculation Details](https://gml.noaa.gov/grad/solcalc/calcdetails.html); the Harth monthly table uses a simpler declination and geometric-daylight approximation whose stated limitations must be retained.

Direct answer

For Bendigo at -36.7582, 144.2802, the declination-only solar-noon altitude is approximately 29.8° at the June solstice, 53.2° at an equinox and 76.7° at the December solstice. Refine these geometry checks with the project date, civil time, facade azimuth, terrain and local horizon. The reproducible location record is GeoNames ID 2176187 in administrative area 07, at -36.7582, 144.2802; replace it with the surveyed parcel point before relying on the result. As a transparent geometry check, declination-only solar-noon altitude is about 29.8° at the June solstice, 53.2° at an equinox and 76.7° at the December solstice. Representative 21st-day geometry ranges from about 9.5 hours in June to 14.5 hours in December; this excludes atmospheric refraction, terrain and obstruction effects. The cited national authority is a discovery starting point; current local documents and a named qualified reviewer control project use of this sun path record.

Prepared by Harth · Prepared from the cited location and country sources; local project inputs remain unreviewed · Published 2026-08-26 · Updated 2026-08-31.

What must be verified for Bendigo?

Bendigo is represented here at approximately -36.7582, 144.2802 for discovery and workflow planning. A project address, parcel, elevation, exposure, authority, and submission date must replace that city-centre reference before design use.

How should sun path be established?

  1. Fix the surveyed site and local time basis.
  2. Select an authoritative weather source or a named solar-position algorithm.
  3. Record period, percentile or scenario and units.
  4. Test sensitivity to elevation, exposure, urban form and horizon.
  5. Save the source file, retrieval date and checker in the model record.
InputProject-specific evidenceQA question
Sitesurveyed coordinates, elevation and horizonDoes the point represent the building?
Weather/solar methodnamed dataset, algorithm, period and time basisAre station, time zone and units explicit?
Design scenariocurrent and future scenario agreed by the teamIs an average being mistaken for an extreme?
Complianceadopted local document and editionWas applicability confirmed with the authority?

What are the limits of this worksheet?

This sun-path-workflow page is a project-starting worksheet, not a design value or approval. The controlling authority and qualified professionals for the Bendigo site remain authoritative.

This primary route consolidates the location evidence needed for Sun Path, Solar Altitude & Azimuth, Solar Shading Design, Daylight & Orientation. A narrower route should be released only when it adds a materially different official source, calculation, process, threshold or worked example.

Bendigo monthly solar geometry check for sun path

Representative dateDeclinationSolar-noon altitudeGeometric daylight
21 January-20.14°73.4°14.1 h
21 February-11.23°64.5°13.1 h
21 March-0.40°53.6°12.0 h
21 April+11.58°41.7°10.8 h
21 May+20.14°33.1°9.9 h
21 June+23.45°29.8°9.5 h
21 July+20.44°32.8°9.8 h
21 August+11.75°41.5°10.8 h
21 September-0.20°53.4°12.0 h
21 October-11.75°65.0°13.2 h
21 November-20.44°73.7°14.2 h
21 December-23.45°76.7°14.5 h

Month-by-month geometry interpretation

  • 21 January: approximate solar-noon altitude 73.4° (zenith angle 16.6°) and 14.1 hours of geometric daylight. That is 0.4 hours shorter than the preceding representative date in this annual sequence.
  • 21 February: approximate solar-noon altitude 64.5° (zenith angle 25.5°) and 13.1 hours of geometric daylight. That is 1.0 hours shorter than the preceding representative date in this annual sequence.
  • 21 March: approximate solar-noon altitude 53.6° (zenith angle 36.4°) and 12.0 hours of geometric daylight. That is 1.1 hours shorter than the preceding representative date in this annual sequence.
  • 21 April: approximate solar-noon altitude 41.7° (zenith angle 48.3°) and 10.8 hours of geometric daylight. That is 1.2 hours shorter than the preceding representative date in this annual sequence.
  • 21 May: approximate solar-noon altitude 33.1° (zenith angle 56.9°) and 9.9 hours of geometric daylight. That is 0.9 hours shorter than the preceding representative date in this annual sequence.
  • 21 June: approximate solar-noon altitude 29.8° (zenith angle 60.2°) and 9.5 hours of geometric daylight. That is 0.4 hours shorter than the preceding representative date in this annual sequence.
  • 21 July: approximate solar-noon altitude 32.8° (zenith angle 57.2°) and 9.8 hours of geometric daylight. That is 0.4 hours longer than the preceding representative date in this annual sequence.
  • 21 August: approximate solar-noon altitude 41.5° (zenith angle 48.5°) and 10.8 hours of geometric daylight. That is 1.0 hours longer than the preceding representative date in this annual sequence.
  • 21 September: approximate solar-noon altitude 53.4° (zenith angle 36.6°) and 12.0 hours of geometric daylight. That is 1.2 hours longer than the preceding representative date in this annual sequence.
  • 21 October: approximate solar-noon altitude 65.0° (zenith angle 25.0°) and 13.2 hours of geometric daylight. That is 1.2 hours longer than the preceding representative date in this annual sequence.
  • 21 November: approximate solar-noon altitude 73.7° (zenith angle 16.3°) and 14.2 hours of geometric daylight. That is 1.0 hours longer than the preceding representative date in this annual sequence.
  • 21 December: approximate solar-noon altitude 76.7° (zenith angle 13.3°) and 14.5 hours of geometric daylight. That is 0.4 hours longer than the preceding representative date in this annual sequence.

Harth calculation for latitude -36.7582°: Cooper declination approximation, 90° - |latitude - declination| at solar noon, and centre-to-centre sunrise hour angle. See NOAA's solar calculation details for fuller method context. This screening table excludes equation-of-time/civil-time conversion, atmospheric refraction, terrain, facade azimuth and obstructions; it is not an hourly shading result.

Sources and method

Location data from the GeoNames AU dump (CC BY 4.0, snapshot 2026-08-31, GeoNames ID 2176187). Regulatory starting point: Australian Building Codes Board and the applicable state or territory authority. Figures are illustrative — verify against the current locally adopted edition for the site. Solar-method context: NOAA Solar Calculation Details; the Harth monthly table uses a simpler declination and geometric-daylight approximation whose stated limitations must be retained.

Frequently asked questions

What does the sun path record for Bendigo establish?

The sun path record for Bendigo establishes a reproducible discovery point at -36.7582, 144.2802 (GeoNames ID 2176187, administrative area 07) and a Australia source path. It does not establish a final project value, approval or parcel decision.

What must be replaced before using this sun path workflow for a project in Bendigo?

For the sun path record in Bendigo, replace the -36.7582, 144.2802 city reference with the surveyed site or parcel, identify the competent local authority, and verify the current documents under National Construction Code plus state and territory variations. Record the edition, retrieval date, units, assumptions and named checker before relying on the result.

Design for your site's sun.Render it on your 3D model.