Climate & Energy Design Data
Climate Design Data: Edmonton, Canada
How to research climate design data for a specific site in Edmonton — the controlling authority, source documents, and checks to run before you rely on a number.
Last updated August 31, 2026 · Location data from the [GeoNames CA dump](https://download.geonames.org/export/dump/CA.zip) (CC BY 4.0, snapshot 2026-08-31, GeoNames ID 5946768). Regulatory starting point: [Codes Canada and the applicable provincial or territorial authority](https://nrc.canada.ca/en/certifications-evaluations-standards/codes-canada/codes-canada-publications). Figures are illustrative — verify against the current locally adopted edition for the site. Climate screening data from the [NASA POWER Climatology API documentation](https://power.larc.nasa.gov/docs/services/api/temporal/climatology/) and [exact point response](https://power.larc.nasa.gov/api/temporal/climatology/point?parameters=T2M%2CT2M_MAX%2CT2M_MIN%2CRH2M%2CPRECTOTCORR%2CWS10M&community=SB&longitude=-113.46871&latitude=53.55014&format=JSON), retrieved 2026-08-31; source period: 20-year Meteorological and Solar Monthly & Annual Climatologies (January 2001 - December 2020). NASA POWER values are gridded screening statistics, not code design conditions or guaranteed local observations.
Direct answer
NASA POWER's 2001–2020 climatology at the Edmonton reference point reports an annual mean 2 m temperature of 3.5 °C and relative humidity of 76.4%. The highest monthly maximum is 34.8 °C in July, while the lowest monthly minimum is -42.7 °C in January; these are screening statistics, not code design temperatures. The point response uses LST and the 20-year Meteorological and Solar Monthly & Annual Climatologies (January 2001 - December 2020); its annual corrected precipitation is 1.42 mm/day and annual 10 m wind speed is 4.25 m/s. For climate design data, use the 34.8 °C and -42.7 °C monthly extrema to screen seasonal exposure, then obtain the adopted percentile design conditions. NASA POWER is gridded climatology: verify elevation, microclimate, urban exposure, station or weather-file suitability, current code edition and the authority's required source before design use.
Prepared by Harth · Harth transformed the cited NASA POWER climatology into this screening table; project design conditions and local applicability remain unreviewed · Published 2026-08-26 · Updated 2026-08-31.
What must be verified for Edmonton?
Edmonton is represented here at approximately 53.5501, -113.4687 for discovery and workflow planning. A project address, parcel, elevation, exposure, authority, and submission date must replace that city-centre reference before design use.
How should climate design data be established?
- Fix the surveyed site and local time basis.
- Select an authoritative weather source or a named solar-position algorithm.
- Record period, percentile or scenario and units.
- Test sensitivity to elevation, exposure, urban form and horizon.
- Save the source file, retrieval date and checker in the model record.
| Input | Project-specific evidence | QA question |
|---|---|---|
| Site | surveyed coordinates, elevation and horizon | Does the point represent the building? |
| Weather/solar method | named dataset, algorithm, period and time basis | Are station, time zone and units explicit? |
| Design scenario | current and future scenario agreed by the team | Is an average being mistaken for an extreme? |
| Compliance | adopted local document and edition | Was applicability confirmed with the authority? |
What are the limits of this worksheet?
This climate-design-workflow page is a project-starting worksheet, not a design value or approval. The controlling authority and qualified professionals for the Edmonton site remain authoritative.
Which related searches does this primary location record cover?
This primary route consolidates the location evidence needed for Climate Design Data, Weather File Guide, Overheating Weather Data, Building Climate Checklist. A narrower route should be released only when it adds a materially different official source, calculation, process, threshold or worked example.
Edmonton NASA POWER monthly climate screening table
| Month | Mean °C | Monthly max °C | Monthly min °C | RH % | Precipitation mm/day | Wind at 10 m m/s |
|---|---|---|---|---|---|---|
| January | -10.20 | 7.55 | -42.71 | 90.81 | 0.72 | 4.73 |
| February | -9.26 | 11.12 | -38.73 | 88.25 | 0.63 | 4.56 |
| March | -3.77 | 23.04 | -37.81 | 79.51 | 0.88 | 4.53 |
| April | 3.80 | 25.56 | -19.88 | 68.20 | 1.34 | 4.64 |
| May | 10.52 | 29.45 | -6.31 | 64.71 | 2.06 | 4.38 |
| June | 14.86 | 33.34 | 0.87 | 68.38 | 2.83 | 3.88 |
| July | 17.79 | 34.78 | 3.58 | 68.57 | 3.08 | 3.70 |
| August | 16.46 | 34.33 | 1.93 | 68.02 | 1.77 | 3.57 |
| September | 11.01 | 31.40 | -5.61 | 70.14 | 1.35 | 3.99 |
| October | 3.46 | 24.91 | -14.81 | 76.26 | 0.93 | 4.32 |
| November | -4.02 | 16.48 | -33.75 | 84.82 | 0.86 | 4.27 |
| December | -9.75 | 7.04 | -35.22 | 89.54 | 0.60 | 4.44 |
Month-by-month climate interpretation
- January: mean temperature -10.20 °C is 13.67 °C below the annual mean; the monthly max–min span is 50.26 °C. Relative humidity is 90.81% (14.43 points above annual), while corrected precipitation at 0.72 mm/day is 0.70 mm/day drier than the annual daily rate.
- February: mean temperature -9.26 °C is 12.73 °C below the annual mean; the monthly max–min span is 49.85 °C. Relative humidity is 88.25% (11.87 points above annual), while corrected precipitation at 0.63 mm/day is 0.79 mm/day drier than the annual daily rate.
- March: mean temperature -3.77 °C is 7.24 °C below the annual mean; the monthly max–min span is 60.85 °C. Relative humidity is 79.51% (3.13 points above annual), while corrected precipitation at 0.88 mm/day is 0.54 mm/day drier than the annual daily rate.
- April: mean temperature 3.80 °C is 0.33 °C above the annual mean; the monthly max–min span is 45.44 °C. Relative humidity is 68.20% (8.18 points below annual), while corrected precipitation at 1.34 mm/day is 0.08 mm/day drier than the annual daily rate.
- May: mean temperature 10.52 °C is 7.05 °C above the annual mean; the monthly max–min span is 35.76 °C. Relative humidity is 64.71% (11.67 points below annual), while corrected precipitation at 2.06 mm/day is 0.64 mm/day wetter than the annual daily rate.
- June: mean temperature 14.86 °C is 11.39 °C above the annual mean; the monthly max–min span is 32.47 °C. Relative humidity is 68.38% (8.00 points below annual), while corrected precipitation at 2.83 mm/day is 1.41 mm/day wetter than the annual daily rate.
- July: mean temperature 17.79 °C is 14.32 °C above the annual mean; the monthly max–min span is 31.20 °C. Relative humidity is 68.57% (7.81 points below annual), while corrected precipitation at 3.08 mm/day is 1.66 mm/day wetter than the annual daily rate.
- August: mean temperature 16.46 °C is 12.99 °C above the annual mean; the monthly max–min span is 32.40 °C. Relative humidity is 68.02% (8.36 points below annual), while corrected precipitation at 1.77 mm/day is 0.35 mm/day wetter than the annual daily rate.
- September: mean temperature 11.01 °C is 7.54 °C above the annual mean; the monthly max–min span is 37.01 °C. Relative humidity is 70.14% (6.24 points below annual), while corrected precipitation at 1.35 mm/day is 0.07 mm/day drier than the annual daily rate.
- October: mean temperature 3.46 °C is 0.01 °C below the annual mean; the monthly max–min span is 39.72 °C. Relative humidity is 76.26% (0.12 points below annual), while corrected precipitation at 0.93 mm/day is 0.49 mm/day drier than the annual daily rate.
- November: mean temperature -4.02 °C is 7.49 °C below the annual mean; the monthly max–min span is 50.23 °C. Relative humidity is 84.82% (8.44 points above annual), while corrected precipitation at 0.86 mm/day is 0.56 mm/day drier than the annual daily rate.
- December: mean temperature -9.75 °C is 13.22 °C below the annual mean; the monthly max–min span is 42.26 °C. Relative humidity is 89.54% (13.16 points above annual), while corrected precipitation at 0.60 mm/day is 0.82 mm/day drier than the annual daily rate.
Harth retrieved this point climatology from NASA POWER API v2.9.7 for location record 5946768. It is a reproducible screening dataset, not an hourly weather file, forecast, code design condition or substitute for local professional review.
Where can you explore related guidance?
- Explore all climate data guidance
- Climate Design Data: Calgary, Canada
- Climate Design Data: Saskatoon, Canada
- Climate Design Data: Kelowna, Canada
- Climate Design Data: Coquitlam, Canada
Sources and method
Location data from the GeoNames CA dump (CC BY 4.0, snapshot 2026-08-31, GeoNames ID 5946768). Regulatory starting point: Codes Canada and the applicable provincial or territorial authority. Figures are illustrative — verify against the current locally adopted edition for the site. Climate screening data from the NASA POWER Climatology API documentation and exact point response, retrieved 2026-08-31; source period: 20-year Meteorological and Solar Monthly & Annual Climatologies (January 2001 - December 2020). NASA POWER values are gridded screening statistics, not code design conditions or guaranteed local observations.
Source links
Frequently asked questions
What does NASA POWER climatology show for Edmonton?
For the Edmonton reference point, the 2001–2020 NASA POWER climatology reports 3.5 °C annual mean temperature, 76.4% relative humidity and 1.42 mm/day corrected precipitation. The monthly maximum peaks at 34.8 °C in July.
Can the Edmonton climatology replace project design temperatures or an hourly weather file?
No. The Edmonton response is gridded monthly climatology; its lowest monthly minimum of -42.7 °C in January is not a code percentile or observed site extreme. Verify elevation, local exposure, the required weather file or design-condition source and the current adopted code.
Related pages
- Climate Design Data: Ebute Ikorodu, Nigeria
Climate Design Data for Ebute Ikorodu: source-led evidence, applicability and project QA checklist.
- Climate Design Data: Edinburgh, UK
Climate Design Data for Edinburgh: source-led evidence, applicability and project QA checklist.
- Climate Design Data for Edinburgh, UK
Edinburgh building climate data: Met Office Gogarbank 1991–2020 normals, CIBSE TRY/DSY selection and April 2026 Scottish Building Standards caveats.
- Climate Design Data: Emalahleni, South Africa
Climate Design Data for Emalahleni: source-led evidence, applicability and project QA checklist.
- Climate Design Data: Embu, Kenya
Climate Design Data for Embu: source-led evidence, applicability and project QA checklist.
- Climate Design Data: Ennis, Ireland
Climate Design Data for Ennis: source-led evidence, applicability and project QA checklist.