Climate & Energy Design Data
Climate Design Data: Makurdi, Nigeria
How to research climate design data for a specific site in Makurdi — the controlling authority, source documents, and checks to run before you rely on a number.
Last updated August 31, 2026 · Location data from the [GeoNames NG dump](https://download.geonames.org/export/dump/NG.zip) (CC BY 4.0, snapshot 2026-08-31, GeoNames ID 2331140). Regulatory starting point: [Federal Ministry of Housing and Urban Development and the applicable state authority](https://fmhud.gov.ng/). Figures are illustrative — verify against the current locally adopted edition for the site. Climate screening data from the [NASA POWER Climatology API documentation](https://power.larc.nasa.gov/docs/services/api/temporal/climatology/) and [exact point response](https://power.larc.nasa.gov/api/temporal/climatology/point?parameters=T2M%2CT2M_MAX%2CT2M_MIN%2CRH2M%2CPRECTOTCORR%2CWS10M&community=SB&longitude=8.52139&latitude=7.73375&format=JSON), retrieved 2026-08-31; source period: 20-year Meteorological and Solar Monthly & Annual Climatologies (January 2001 - December 2020). NASA POWER values are gridded screening statistics, not code design conditions or guaranteed local observations.
Direct answer
NASA POWER's 2001–2020 climatology at the Makurdi reference point reports an annual mean 2 m temperature of 25.9 °C and relative humidity of 76.8%. The highest monthly maximum is 39.5 °C in March, while the lowest monthly minimum is 11.1 °C in December; these are screening statistics, not code design temperatures. The point response uses LST and the 20-year Meteorological and Solar Monthly & Annual Climatologies (January 2001 - December 2020); its annual corrected precipitation is 3.37 mm/day and annual 10 m wind speed is 2.98 m/s. For climate design data, use the 39.5 °C and 11.1 °C monthly extrema to screen seasonal exposure, then obtain the adopted percentile design conditions. NASA POWER is gridded climatology: verify elevation, microclimate, urban exposure, station or weather-file suitability, current code edition and the authority's required source before design use.
Prepared by Harth · Harth transformed the cited NASA POWER climatology into this screening table; project design conditions and local applicability remain unreviewed · Published 2026-08-26 · Updated 2026-08-31.
What must be verified for Makurdi?
Makurdi is represented here at approximately 7.7337, 8.5214 for discovery and workflow planning. A project address, parcel, elevation, exposure, authority, and submission date must replace that city-centre reference before design use.
How should climate design data be established?
- Fix the surveyed site and local time basis.
- Select an authoritative weather source or a named solar-position algorithm.
- Record period, percentile or scenario and units.
- Test sensitivity to elevation, exposure, urban form and horizon.
- Save the source file, retrieval date and checker in the model record.
| Input | Project-specific evidence | QA question |
|---|---|---|
| Site | surveyed coordinates, elevation and horizon | Does the point represent the building? |
| Weather/solar method | named dataset, algorithm, period and time basis | Are station, time zone and units explicit? |
| Design scenario | current and future scenario agreed by the team | Is an average being mistaken for an extreme? |
| Compliance | adopted local document and edition | Was applicability confirmed with the authority? |
What are the limits of this worksheet?
This climate-design-workflow page is a project-starting worksheet, not a design value or approval. The controlling authority and qualified professionals for the Makurdi site remain authoritative.
Which related searches does this primary location record cover?
This primary route consolidates the location evidence needed for Climate Design Data, Weather File Guide, Overheating Weather Data, Building Climate Checklist. A narrower route should be released only when it adds a materially different official source, calculation, process, threshold or worked example.
Makurdi NASA POWER monthly climate screening table
| Month | Mean °C | Monthly max °C | Monthly min °C | RH % | Precipitation mm/day | Wind at 10 m m/s |
|---|---|---|---|---|---|---|
| January | 24.20 | 37.19 | 11.45 | 55.47 | 0.15 | 3.49 |
| February | 26.77 | 39.38 | 12.51 | 60.96 | 0.44 | 3.17 |
| March | 28.00 | 39.48 | 17.58 | 72.31 | 1.13 | 3.34 |
| April | 27.86 | 39.05 | 20.90 | 78.33 | 3.59 | 3.54 |
| May | 27.07 | 37.10 | 21.77 | 83.12 | 4.57 | 3.08 |
| June | 26.07 | 36.54 | 20.87 | 85.34 | 5.07 | 3.11 |
| July | 25.32 | 33.71 | 20.05 | 86.78 | 5.47 | 3.20 |
| August | 25.12 | 31.33 | 19.98 | 87.33 | 6.49 | 3.19 |
| September | 25.26 | 31.73 | 20.76 | 87.78 | 7.24 | 2.59 |
| October | 25.64 | 32.75 | 19.09 | 86.60 | 4.96 | 2.17 |
| November | 25.73 | 35.44 | 13.71 | 75.18 | 1.06 | 1.99 |
| December | 24.13 | 36.29 | 11.07 | 61.04 | 0.07 | 2.88 |
Month-by-month climate interpretation
- January: mean temperature 24.20 °C is 1.72 °C below the annual mean; the monthly max–min span is 25.74 °C. Relative humidity is 55.47% (21.28 points below annual), while corrected precipitation at 0.15 mm/day is 3.22 mm/day drier than the annual daily rate.
- February: mean temperature 26.77 °C is 0.85 °C above the annual mean; the monthly max–min span is 26.87 °C. Relative humidity is 60.96% (15.79 points below annual), while corrected precipitation at 0.44 mm/day is 2.93 mm/day drier than the annual daily rate.
- March: mean temperature 28.00 °C is 2.08 °C above the annual mean; the monthly max–min span is 21.90 °C. Relative humidity is 72.31% (4.44 points below annual), while corrected precipitation at 1.13 mm/day is 2.24 mm/day drier than the annual daily rate.
- April: mean temperature 27.86 °C is 1.94 °C above the annual mean; the monthly max–min span is 18.15 °C. Relative humidity is 78.33% (1.58 points above annual), while corrected precipitation at 3.59 mm/day is 0.22 mm/day wetter than the annual daily rate.
- May: mean temperature 27.07 °C is 1.15 °C above the annual mean; the monthly max–min span is 15.33 °C. Relative humidity is 83.12% (6.37 points above annual), while corrected precipitation at 4.57 mm/day is 1.20 mm/day wetter than the annual daily rate.
- June: mean temperature 26.07 °C is 0.15 °C above the annual mean; the monthly max–min span is 15.67 °C. Relative humidity is 85.34% (8.59 points above annual), while corrected precipitation at 5.07 mm/day is 1.70 mm/day wetter than the annual daily rate.
- July: mean temperature 25.32 °C is 0.60 °C below the annual mean; the monthly max–min span is 13.66 °C. Relative humidity is 86.78% (10.03 points above annual), while corrected precipitation at 5.47 mm/day is 2.10 mm/day wetter than the annual daily rate.
- August: mean temperature 25.12 °C is 0.80 °C below the annual mean; the monthly max–min span is 11.35 °C. Relative humidity is 87.33% (10.58 points above annual), while corrected precipitation at 6.49 mm/day is 3.12 mm/day wetter than the annual daily rate.
- September: mean temperature 25.26 °C is 0.66 °C below the annual mean; the monthly max–min span is 10.97 °C. Relative humidity is 87.78% (11.03 points above annual), while corrected precipitation at 7.24 mm/day is 3.87 mm/day wetter than the annual daily rate.
- October: mean temperature 25.64 °C is 0.28 °C below the annual mean; the monthly max–min span is 13.66 °C. Relative humidity is 86.60% (9.85 points above annual), while corrected precipitation at 4.96 mm/day is 1.59 mm/day wetter than the annual daily rate.
- November: mean temperature 25.73 °C is 0.19 °C below the annual mean; the monthly max–min span is 21.73 °C. Relative humidity is 75.18% (1.57 points below annual), while corrected precipitation at 1.06 mm/day is 2.31 mm/day drier than the annual daily rate.
- December: mean temperature 24.13 °C is 1.79 °C below the annual mean; the monthly max–min span is 25.22 °C. Relative humidity is 61.04% (15.71 points below annual), while corrected precipitation at 0.07 mm/day is 3.30 mm/day drier than the annual daily rate.
Harth retrieved this point climatology from NASA POWER API v2.9.7 for location record 2331140. It is a reproducible screening dataset, not an hourly weather file, forecast, code design condition or substitute for local professional review.
Where can you explore related guidance?
- Explore all climate data guidance
- Climate Design Data: Abuja, Nigeria
- Climate Design Data: Jos, Nigeria
- Climate Design Data: Okene, Nigeria
- Climate Design Data: Onitsha, Nigeria
Sources and method
Location data from the GeoNames NG dump (CC BY 4.0, snapshot 2026-08-31, GeoNames ID 2331140). Regulatory starting point: Federal Ministry of Housing and Urban Development and the applicable state authority. Figures are illustrative — verify against the current locally adopted edition for the site. Climate screening data from the NASA POWER Climatology API documentation and exact point response, retrieved 2026-08-31; source period: 20-year Meteorological and Solar Monthly & Annual Climatologies (January 2001 - December 2020). NASA POWER values are gridded screening statistics, not code design conditions or guaranteed local observations.
Source links
Frequently asked questions
What does NASA POWER climatology show for Makurdi?
For the Makurdi reference point, the 2001–2020 NASA POWER climatology reports 25.9 °C annual mean temperature, 76.8% relative humidity and 3.37 mm/day corrected precipitation. The monthly maximum peaks at 39.5 °C in March.
Can the Makurdi climatology replace project design temperatures or an hourly weather file?
No. The Makurdi response is gridded monthly climatology; its lowest monthly minimum of 11.1 °C in December is not a code percentile or observed site extreme. Verify elevation, local exposure, the required weather file or design-condition source and the current adopted code.
Related pages
- Climate Design Data: Mackay, Australia
Climate Design Data for Mackay: source-led evidence, applicability and project QA checklist.
- Climate Design Data: Madurai, India
Climate Design Data for Madurai: source-led evidence, applicability and project QA checklist.
- Climate Design Data: Maiduguri, Nigeria
Climate Design Data for Maiduguri: source-led evidence, applicability and project QA checklist.
- Climate Design Data: Malacca, Malaysia
Climate Design Data for Malacca: source-led evidence, applicability and project QA checklist.
- Climate Design Data: Malindi, Kenya
Climate Design Data for Malindi: source-led evidence, applicability and project QA checklist.
- Climate Design Data for Manchester, UK
Manchester building climate data using Met Office Woodford 1991–2020 normals, CIBSE TRY/DSY selection, station-proxy checks and English regulation caveats.