Updated 2026-10-01

US Building Code Adoption by State

Arizona Building Code: Which Editions Are Adopted

Which I-Code editions Arizona is recorded as adopting, what the record does not cover, and how to confirm the edition governing a project.

On this page

Last updated October 1, 2026 · Adopted editions transcribed from the [ICC Master I-Code Adoption Chart (January 2024)](https://www.iccsafe.org/wp-content/uploads/Master-I-Code-Adoption-Chart-1.pdf), reproduced with the chart's own legend so an “X” is not mistaken for a statewide adoption. ICC notes that not all jurisdictions report their adoptions and publishes updates at [iccsafe.org/adoptions](https://www.iccsafe.org/adoptions). The current edition, its effective date and the state amendments are published by [Arizona's official building-code publication](https://www.azbo.us/az-codes.html), which controls.

Direct answer

No statewide building code; every city and county adopts its own in Arizona. Most jurisdictions work from an IBC or IRC edition, but the edition and the local amendments vary between neighbouring jurisdictions. Which edition applies can change across a city boundary, so the adopted edition has to be confirmed with the authority having jurisdiction for the specific address before any code citation. The State Fire Code, now based on the 2024 International Fire Code, applies to state and county buildings and to public buildings in areas with no local fire code. Record the permit application date with it: a code change normally applies from an effective date, and an application filed before that date is usually reviewed under the previous edition. This was checked on 2026-10-01 against Building Codes Assistance Project — Arizona code status, which is the source that controls. The cross-state comparison further down this page comes from the ICC adoption chart dated January 2024, so where the two disagree the record above is the newer one.

Content and cited inputs reviewed by Harth team · Published 2026-09-07 · Updated 2026-10-01.

Code-adoption status diagram: Arizona Building Code: Which Editions Are Adopted
Which I-Code editions Arizona is recorded as adopting, what the record does not cover, and how to confirm the edition governing a project.

Which codes has Arizona adopted now?

No statewide building code; every city and county adopts its own.

Most jurisdictions work from an IBC or IRC edition, but the edition and the local amendments vary between neighbouring jurisdictions.

DisciplineAdopted
Building, residential and energyLocal adoption; no statewide edition
Fire (state and county buildings, and areas without a local fire code)2024 IFC as the Arizona State Fire Code, from 13 April 2026

Local adoption: Which edition applies can change across a city boundary, so the adopted edition has to be confirmed with the authority having jurisdiction for the specific address before any code citation. The State Fire Code, now based on the 2024 International Fire Code, applies to state and county buildings and to public buildings in areas with no local fire code.

Checked 2026-10-01 against Building Codes Assistance Project — Arizona code status, a code-tracking record rather than the state's own publication. Confirm the edition and effective date for the specific permit jurisdiction before relying on it.

The cross-state record

For comparison across states, every I-Code the ICC Master I-Code Adoption Chart (January 2024) tracks, as it records Arizona. Where this disagrees with the record above, the record above is newer:

CodeRecorded adoption
International Building Code (IBC)Some jurisdictions only
International Residential Code (IRC)Some jurisdictions only
International Fire Code (IFC)2018
International Mechanical Code (IMC)Some jurisdictions only
International Plumbing Code (IPC)Some jurisdictions only
International Private Sewage Disposal Code (IPSDC)Some jurisdictions only
International Fuel Gas Code (IFGC)Some jurisdictions only
International Green Construction Code (IgCC)Some jurisdictions only
International Energy Conservation Code — Residential (IECC-R)Some jurisdictions only
International Energy Conservation Code — Commercial (IECC-C)Some jurisdictions only
International Property Maintenance Code (IPMC)Some jurisdictions only
International Existing Building Code (IEBC)Some jurisdictions only
International Swimming Pool and Spa Code (ISPSC)Some jurisdictions only
ICC Performance Code (ICCPC)Some jurisdictions only
International Wildland-Urban Interface Code (IWUIC)Some jurisdictions only
International Zoning Code (IZC)Some jurisdictions only
ICC 700 National Green Building Standard (ICC 700)Some jurisdictions only

Arizona has a recorded edition year for 1 of the 17 codes: 2018 for the fire code. The building, residential, mechanical, plumbing, private sewage, fuel gas, green construction, residential energy, commercial energy, property maintenance, existing buildings, swimming pool and spa, performance, wildland-urban interface, zoning and green building standard codes appear as adopted by individual state or local agencies rather than as a statewide standard, so whether they apply depends on the permit jurisdiction for the project address.

Source: ICC Master I-Code Adoption Chart (January 2024).

How Arizona compares with its neighbours

StateBuilding (IBC)Residential (IRC)Residential energy (IECC-R)
ArizonaLocalLocalLocal
New Mexico2021*2021*2021*
Nevada2024 (limited)2024 (limited)2024
Utah20242021State code
California2024*2024*State code

Statewide editions in force, checked 2026-10-01; “Local” means no state adoption, “(limited)” a state adoption for some buildings only, and * a state-titled code built on that edition.

New Mexico, Nevada, Utah and California differ from Arizona on the building code alone. A practice working across that border is working to two editions, whatever the office standard says.

Where Arizona sits in the national record

Arizona is one of 17 jurisdictions with no statewide IBC edition in force. Adoption runs through local programmes or applies only to a subset of buildings, so there is no single answer for the state and the permit jurisdiction for the address decides.

Arizona is one of 15 jurisdictions with no statewide residential energy code based on an IECC edition in force, so the energy question is answered by the state's own document or by the local jurisdiction.

Across all 17 codes the January 2024 ICC chart tracks, Arizona has a recorded edition for 1, which ranked it 49th of 51. A low count is not a gap in regulation — it usually means the state legislates through its own documents, or leaves the discipline to local adoption.

What the chart does and does not tell you

The chart's own legend matters more than the numbers:

  • An edition year means one or more state or local agencies adopted that edition. It does not mean every building in the state is designed to it.
  • “Some jurisdictions only” is the chart's X: the code is in use somewhere in the state but is not the standard for all buildings.
  • “Not adopted” is a blank cell — no state or local jurisdiction reported adopting that code.
  • “State-written code” means the state publishes its own document in place of the model edition, so the model text is a reference, not the law.

ICC states plainly that not every jurisdiction notifies it of an adoption, and this chart is dated January 2024. Treat it as the starting point for a search, never as the answer.

How to confirm the edition that governs a Arizona project

  1. Open Arizona's official building-code publication and find the currently adopted code list with its effective date.
  2. Check whether the permit authority for the project address is the state or a local programme with its own adoption.
  3. Read the state amendments alongside the model edition — an amended table or definition changes the requirement even when the edition matches.
  4. Record the permit application date. A code change usually applies from an effective date, and applications filed before it are normally reviewed under the previous edition.
  5. Get the answer in writing from the authority having jurisdiction before it drives a design decision.

Arizona code-basis worksheet

Fill this in once per project and keep it with the drawing set. Every row is a question a plan reviewer can ask, and the answer changes with the address and the application date, not with the state.

ItemProject entry
Project address and permit jurisdiction
State programme or local programme as AHJ
Building / residential edition and effective date
Energy code edition (or state-written code)
Fire, mechanical, plumbing and fuel-gas editions
Accessibility standard and edition
State amendments consulted (citation)
Local amendments consulted (citation)
Permit application date and vesting rule
Written AHJ confirmation (date, name)

This worksheet records a determination; it does not make one. The authority having jurisdiction decides which edition and which amendments apply.

Sources and method

Adopted editions transcribed from the ICC Master I-Code Adoption Chart (January 2024), reproduced with the chart's own legend so an “X” is not mistaken for a statewide adoption. ICC notes that not all jurisdictions report their adoptions and publishes updates at iccsafe.org/adoptions. The current edition, its effective date and the state amendments are published by Arizona's official building-code publication, which controls.

Frequently asked questions

Which building code edition does Arizona use?

No statewide building code; every city and county adopts its own. Most jurisdictions work from an IBC or IRC edition, but the edition and the local amendments vary between neighbouring jurisdictions. This was checked on 2026-10-01 against Building Codes Assistance Project — Arizona code status; confirm the edition and effective date for the permit jurisdiction before relying on it.

How current is this record?

The adoption above was checked on 2026-10-01 against Building Codes Assistance Project — Arizona code status, the source that controls. The cross-state table comes from the ICC Master I-Code Adoption Chart (January 2024), which is older, so where the two disagree the checked record is the one to use.

The AI-powered workspacefor architects.