Updated 2026-10-01

US Building Code Adoption by State

Maine Building Code: Which Editions Are Adopted

Which I-Code editions Maine is recorded as adopting, what the record does not cover, and how to confirm the edition governing a project.

On this page

Last updated October 1, 2026 · Adopted editions transcribed from the [ICC Master I-Code Adoption Chart (January 2024)](https://www.iccsafe.org/wp-content/uploads/Master-I-Code-Adoption-Chart-1.pdf), reproduced with the chart's own legend so an “X” is not mistaken for a statewide adoption. ICC notes that not all jurisdictions report their adoptions and publishes updates at [iccsafe.org/adoptions](https://www.iccsafe.org/adoptions). The current edition, its effective date and the state amendments are published by [Maine Office of Community Affairs, Division of Building Codes and Standards](https://www.maine.gov/moca/programs/code-enforcement/laws-rules/rules), which controls.

Direct answer

2021 Maine Uniform Building and Energy Code (MUBEC), effective 7 April 2025 in Maine. 2021 IBC, IRC, IEBC, IECC and IMC incorporated by reference with Maine amendments, plus referenced ASHRAE standards. Permits applied for before 7 April 2025 stay under the code in force when they were issued. Municipalities may opt in to the stricter MUBEC Stretch Code (Appendix NA of the energy chapter), which then becomes mandatory in that municipality. Record the permit application date with it: a code change normally applies from an effective date, and an application filed before that date is usually reviewed under the previous edition. This was checked on 2026-10-01 against Maine Office of Community Affairs, Division of Building Codes and Standards, which is the source that controls. The cross-state comparison further down this page comes from the ICC adoption chart dated January 2024, so where the two disagree the record above is the newer one.

Content and cited inputs reviewed by Harth team · Published 2026-09-07 · Updated 2026-10-01.

Code-adoption status diagram: Maine Building Code: Which Editions Are Adopted
Which I-Code editions Maine is recorded as adopting, what the record does not cover, and how to confirm the edition governing a project.

Which codes has Maine adopted now?

2021 Maine Uniform Building and Energy Code (MUBEC), effective 7 April 2025.

2021 IBC, IRC, IEBC, IECC and IMC incorporated by reference with Maine amendments, plus referenced ASHRAE standards.

DisciplineAdopted
Building2021 IBC with Maine amendments (Commercial Building Code of Maine)
Residential2021 IRC with Maine amendments
Energy2021 IECC with Maine amendments; optional MUBEC Stretch Code for municipalities
Existing buildings2021 IEBC with Maine amendments
Mechanical2021 IMC with Maine amendments
FireNFPA 1 and NFPA 101, adopted by the State Fire Marshal

Transition: Permits applied for before 7 April 2025 stay under the code in force when they were issued. Municipalities may opt in to the stricter MUBEC Stretch Code (Appendix NA of the energy chapter), which then becomes mandatory in that municipality.

Local adoption: MUBEC applies statewide and compliance is the building owner's responsibility everywhere. Municipalities with more than 4,000 residents must enforce it; smaller towns may choose to enforce it, or owners can use third-party inspectors. Plumbing, electrical and fuel-gas work follow separate state codes, and fire safety follows NFPA 1 and NFPA 101 rather than the International Fire Code.

Checked 2026-10-01 against Maine Office of Community Affairs, Division of Building Codes and Standards. Confirm the edition and effective date for the specific permit jurisdiction before relying on it.

The cross-state record

For comparison across states, every I-Code the ICC Master I-Code Adoption Chart (January 2024) tracks, as it records Maine. Where this disagrees with the record above, the record above is newer:

CodeRecorded adoption
International Building Code (IBC)2015
International Residential Code (IRC)2015
International Fire Code (IFC)Not adopted
International Mechanical Code (IMC)2015
International Plumbing Code (IPC)Not adopted
International Private Sewage Disposal Code (IPSDC)Not adopted
International Fuel Gas Code (IFGC)Not adopted
International Green Construction Code (IgCC)Not adopted
International Energy Conservation Code — Residential (IECC-R)2015 (plus a 2021 stretch code)
International Energy Conservation Code — Commercial (IECC-C)2015 (plus a 2021 stretch code)
International Property Maintenance Code (IPMC)Some jurisdictions only
International Existing Building Code (IEBC)2015
International Swimming Pool and Spa Code (ISPSC)Not adopted
ICC Performance Code (ICCPC)Not adopted
International Wildland-Urban Interface Code (IWUIC)Not adopted
International Zoning Code (IZC)Not adopted
ICC 700 National Green Building Standard (ICC 700)Not adopted

Maine has a recorded edition year for 6 of the 17 codes: 2015 for the building, residential, mechanical, residential energy, commercial energy and existing buildings codes. The property maintenance code appears as adopted by individual state or local agencies rather than as a statewide standard, so whether it applies depends on the permit jurisdiction for the project address. No adoption at all is recorded for the fire, plumbing, private sewage, fuel gas, green construction, swimming pool and spa, performance, wildland-urban interface, zoning and green building standard codes.

Source: ICC Master I-Code Adoption Chart (January 2024).

How Maine compares with its neighbours

StateBuilding (IBC)Residential (IRC)Residential energy (IECC-R)
Maine202120212021
New Hampshire202420242018
Vermont2021 (limited)None2018*
Massachusetts2021*2021*2021*
New York2024*2024*2024*

Statewide editions in force, checked 2026-10-01; “Local” means no state adoption, “(limited)” a state adoption for some buildings only, and * a state-titled code built on that edition.

New Hampshire, Vermont, Massachusetts and New York differ from Maine on the building code alone. A practice working across that border is working to two editions, whatever the office standard says.

Where Maine sits in the national record

Of the 50 states and the District of Columbia, 17 enforce the 2021 IBC statewide, 10 a later edition, 7 an earlier one, and 17 have no statewide IBC edition in force. Maine is at or ahead of the national middle on the building code, so the risk runs the other way: work arriving from a slower-moving state may be drawn to an older edition.

Across all 17 codes the January 2024 ICC chart tracks, Maine has a recorded edition for 6, which ranked it 31st of 51. A low count is not a gap in regulation — it usually means the state legislates through its own documents, or leaves the discipline to local adoption.

What the chart does and does not tell you

The chart's own legend matters more than the numbers:

  • An edition year means one or more state or local agencies adopted that edition. It does not mean every building in the state is designed to it.
  • “Some jurisdictions only” is the chart's X: the code is in use somewhere in the state but is not the standard for all buildings.
  • “Not adopted” is a blank cell — no state or local jurisdiction reported adopting that code.
  • “State-written code” means the state publishes its own document in place of the model edition, so the model text is a reference, not the law.

ICC states plainly that not every jurisdiction notifies it of an adoption, and this chart is dated January 2024. Treat it as the starting point for a search, never as the answer.

How to confirm the edition that governs a Maine project

  1. Open Maine Office of Community Affairs, Division of Building Codes and Standards and find the currently adopted code list with its effective date.
  2. Check whether the permit authority for the project address is the state or a local programme with its own adoption.
  3. Read the state amendments alongside the model edition — an amended table or definition changes the requirement even when the edition matches.
  4. Record the permit application date. A code change usually applies from an effective date, and applications filed before it are normally reviewed under the previous edition.
  5. Get the answer in writing from the authority having jurisdiction before it drives a design decision.

Maine code-basis worksheet

Fill this in once per project and keep it with the drawing set. Every row is a question a plan reviewer can ask, and the answer changes with the address and the application date, not with the state.

ItemProject entry
Project address and permit jurisdiction
State programme or local programme as AHJ
Building / residential edition and effective date
Energy code edition (or state-written code)
Fire, mechanical, plumbing and fuel-gas editions
Accessibility standard and edition
State amendments consulted (citation)
Local amendments consulted (citation)
Permit application date and vesting rule
Written AHJ confirmation (date, name)

This worksheet records a determination; it does not make one. The authority having jurisdiction decides which edition and which amendments apply.

Sources and method

Adopted editions transcribed from the ICC Master I-Code Adoption Chart (January 2024), reproduced with the chart's own legend so an “X” is not mistaken for a statewide adoption. ICC notes that not all jurisdictions report their adoptions and publishes updates at iccsafe.org/adoptions. The current edition, its effective date and the state amendments are published by Maine Office of Community Affairs, Division of Building Codes and Standards, which controls.

Frequently asked questions

Which building code edition does Maine use?

2021 Maine Uniform Building and Energy Code (MUBEC), effective 7 April 2025. 2021 IBC, IRC, IEBC, IECC and IMC incorporated by reference with Maine amendments, plus referenced ASHRAE standards. This was checked on 2026-10-01 against Maine Office of Community Affairs, Division of Building Codes and Standards; confirm the edition and effective date for the permit jurisdiction before relying on it.

How current is this record?

The adoption above was checked on 2026-10-01 against Maine Office of Community Affairs, Division of Building Codes and Standards, the source that controls. The cross-state table comes from the ICC Master I-Code Adoption Chart (January 2024), which is older, so where the two disagree the checked record is the one to use.

The AI-powered workspacefor architects.