1. Log in
  2. Sign up
On this page

Rhode Island

Add to Harth agentView as markdown

Direct answer and reference scope

Rhode Island is presented here as a reference within the the listed code collection collection for Rhode Island. Use the Rhode Island Building Code Commission to confirm the code edition currently adopted for the project, and compare the model text with state amendments, local amendments, effective dates and the permit authority's interpretation. The ICC code library is the model-code publication path. This Harth page is a searchable reference transcription, not an official code publication, legal opinion or confirmation that this edition controls a particular address. Record the project jurisdiction, application date, occupancy, construction type and amendment set before relying on a section. Where this page conflicts with an official publication or the authority having jurisdiction, the official source controls.

Authored and prepared by Harth. Review scope: official verification path added; code text and current local applicability have not been independently reviewed.

Rhode Island adopts a unified statewide State Building Code (the SBC regulation series) through the State Building Code Standards Committee. Effective July 1, 2010, the SBC adopted the 2009 editions of the International Building, Residential, Fire, and Energy Conservation Codes, with Rhode Island amendments, until later code cycles. The model-code text below is the edition the state adopted.

Where verbatim source text is shown, it is reproduced from the code as adopted into law by the jurisdiction, sourced from public.resource.org under the government edicts doctrine (see Georgia v. Public.Resource.Org, Inc., 590 U.S. 255 (2020)). This material reflects enacted law and is provided for reference and educational purposes only. It is not legal advice and may not reflect local amendments or the most recently adopted edition. Always verify requirements with the authority having jurisdiction.