Pergola with climbers

Pergola with climbers is an L7 showcase built from real Harth library objects: 5 parameterised instances of 5 distinct objects. The background is authored geometry — a 24 × 16 m inspection floor with context massing, a north point and a 1.7 m scale figure — so every planting item in the scene is a live, editable library instance rather than fixed mesh.

Open it and the planting objects keep their parameters and connector metadata, so the agent can inspect, check and correct them.

Original reference-informed design in nominal metres; no survey or registered scan.

Connections and material sizes illustrate principles; no structural, fire, thermal or regulatory performance is certified.

Three 6 × 5 m decks at 0.75 m, with 450 mm joist centres, 140 mm boards and 6 mm joints. All framing is physically modelled below the board surface.

Decks are freestanding nominal connection studies; timber durability, structural spans, balustrade loads and wind/tension design for the shade sail are unverified. Roof-layer visibility is needed to inspect pergola rafters and shade membranes.

Real library geometry and parameters are retained. GLB and IFC are static inspection mirrors; use the placement package to create editable Harth library instances.

No routing solver or persisted connection graph is claimed. The documented port pairs are authored joints, and every unused port is listed.

Nominal design geometry; no engineering rating, code compliance, horticultural suitability or cadastral accuracy is claimed.

Try these prompts with the agent:

Inspect how the three climbing species meet the authored pergola supports.

Replace the wisteria with a new seeded instance and keep the stair and seated areas clear.

Compare climber bounds with pergola posts and rafters; actual growth and training are not simulated.

Adapt this palette for the linked winery host using olive and Italian cypress without assuming identical site dimensions.