Building Code Glossary
Fire Command Center: Building Code Definition
How the IBC 2009, IFC 2009 define fire command center, where the wording differs, and which chapters depend on the term.
On this page
Last updated September 7, 2026 · Definitions quoted from the 2009 International Codes as transcribed in this site's building-codes collection, with the source chapter linked for each quotation. Usage counts are computed over the chapters hosted here, one copy per code. The [ICC code library](https://codes.iccsafe.org/codes) publishes the current model text and the [ICC adoption maps](https://www.iccsafe.org/advocacy/code-adoption-maps/) show which edition a jurisdiction has adopted; those sources control.
Direct answer
Fire command center is a defined term in the International Building Code (IBC) 2009, in Fire Protection Systems. The code's own words are: “The principal attended or unattended location where the status of detection, alarm communications and control systems is displayed, and from which the system(s) can be manually controlled.” The IFC 2009 defines the same term with different wording, so the controlling text depends on which code governs the question in front of you — the comparison below sets the versions side by side. The term is used in 14 chapters of this corpus, most often in Fire Protection Systems (IBC 2009), Fire Service Features (IFC 2009), Means of Egress (IFC 2009). These pages transcribe the 2009 model text; verify the definition against the edition and amendments your authority having jurisdiction has adopted.
Content and cited inputs reviewed by Scott Barrington, Harth founder and architectural technology specialist · Published 2026-09-07 · Updated 2026-09-07.
What does this term mean?
Fire Command Center — IBC 2009, Fire Protection Systems:
The principal attended or unattended location where the status of detection, alarm communications and control systems is displayed, and from which the system(s) can be manually controlled.
What must be verified before using this guidance?
Two of the I-Codes in this corpus define Fire Command Center, and the wording is not identical — read the version that governs your question.
| Code | Where it is defined | Definition |
|---|---|---|
| IBC 2009 | Fire Protection Systems | The principal attended or unattended location where the status of detection, alarm communications and control systems is displayed, and from which the system(s) can be manually controlled. |
| IFC 2009 | Fire Service Features | The principal attended or unattended location where the status of the detection, alarm communications and control systems is displayed, and from which the system (s) can be manually controlled. |
Where fire command center is used in the code
The term appears in 14 chapters of the 2009 I-Codes hosted here. The chapters that lean on it hardest are the ones to read next.
| Chapter | Code | Mentions |
|---|---|---|
| Fire Protection Systems | IBC 2009 | 17 |
| Fire Service Features | IFC 2009 | 14 |
| Means of Egress | IFC 2009 | 12 |
| Special Detailed Requirements Based on Use and Occupancy | IBC 2009 | 10 |
| Means of Egress | IBC 2009 | 9 |
| Fire Protection Systems | IFC 2009 | 9 |
| Building Services and Systems | IFC 2009 | 7 |
| Elevators and Conveying Systems | IBC 2009 | 5 |
| Emergency Planning and Preparedness | IFC 2009 | 4 |
| Existing Structures | IBC 2009 | 3 |
| Fire and Smoke Protection Features | IBC 2009 | 2 |
| Definitions | IFC 2009 | 2 |
2 further chapters mention the term.
The term in use
How the code actually writes about fire command center, quoted from the 2009 text hosted here:
Where required by other sections of this code and in all buildings classified as high-rise buildings by the International Building Code, a fire command center for fire department operations shall be provided and shall comply with Sections 508.1.1 through 508.1.5.
Two-way communication systems shall provide communication between each required location and the fire command center or a central control point location approved by the fire department.
Stairway doors that are locked from the stairway side shall be capable of being unlocked simultaneously without unlatching upon a signal from the fire command center.
The terms fire command center is built out of
The definition above leans on 2 other defined terms. Each carries its own code definition, and a local amendment to any of them changes what fire command center covers:
- Control — IRC 2009: A manual or automatic device designed to regulate the gas, air, water or electrical supply to, or operation of, a mechanical system.
- System — IFC 2009: An assembly of equipment consisting of a tank, container or containers, appurtenances, pumps, compressors and connecting piping.
Fire Command Center: what to open, and in what order
Every row is a document this term depends on. The ICC code library and the ICC adoption maps cover the middle rows.
| Check | Where | Confirmed |
|---|---|---|
| Read the definition in the adopted IBC | Fire Protection Systems | |
| Read the definition in the adopted IFC | Fire Service Features | |
| Re-check the requirement that uses it | Fire Protection Systems (IBC 2009) | |
| Re-check the requirement that uses it | Fire Service Features (IFC 2009) | |
| Re-check the requirement that uses it | Means of Egress (IFC 2009) | |
| Re-check the requirement that uses it | Special Detailed Requirements Based on Use and Occupancy (IBC 2009) | |
| Confirm the dependent definition | Control | |
| Confirm the dependent definition | System | |
| Local amendment to any of the above | Jurisdiction's amendment list |
A research aid, not a code determination. The authority having jurisdiction decides which edition and which amendments apply.
Where can you explore related guidance?
Sources and method
Definitions quoted from the 2009 International Codes as transcribed in this site's building-codes collection, with the source chapter linked for each quotation. Usage counts are computed over the chapters hosted here, one copy per code. The ICC code library publishes the current model text and the ICC adoption maps show which edition a jurisdiction has adopted; those sources control.
Source links
Frequently asked questions
What is the code definition of fire command center?
The International Building Code (IBC) 2009 defines it in Fire Protection Systems as: “The principal attended or unattended location where the status of detection, alarm communications and control systems is displayed, and from which the system(s) can be manually controlled.” The 2009 model text is reproduced here; the definition that binds your project is the one in the edition your jurisdiction has adopted, as amended locally.
Which parts of the code depend on fire command center?
In this corpus the term is used across 14 chapters, led by Fire Protection Systems in the IBC 2009. Those are the sections whose scope moves if the definition is amended locally, so read them together with Chapter 2 rather than on their own.
What is a fire command center in a building?
In the 2009 I-Codes hosted here it is a defined term rather than a description. The IBC 2009 states, in Fire Protection Systems: “The principal attended or unattended location where the status of detection, alarm communications and control systems is displayed, and from which the system(s) can be manually controlled.” It is defined in IBC 2009, IFC 2009. It is not the same as Building, which the IBC 2009 defines separately as “Any structure used or intended for supporting or sheltering any use or occupancy.” Because it is a defined term, whatever the adopted edition says it means is what every section using it means — so check Chapter 2 of that edition and any local amendment before relying on this wording.
What is the purpose of a fire command center?
In the 2009 I-Codes hosted here it is a defined term rather than a description. The IBC 2009 states, in Fire Protection Systems: “The principal attended or unattended location where the status of detection, alarm communications and control systems is displayed, and from which the system(s) can be manually controlled.” It is defined in IBC 2009, IFC 2009. Because it is a defined term, whatever the adopted edition says it means is what every section using it means — so check Chapter 2 of that edition and any local amendment before relying on this wording.
Related pages
- Fire Barrier: Building Code Definition
Fire Barrier — IBC 2009 definition: A fire-resistance-rated wall assembly of materials designed to restrict the spread of fire in which continuity …
- Fire Chief: Building Code Definition
Fire Chief — IFC 2009 definition: The chief officer of the fire department serving the jurisdiction, or a duly authorized representative.
- Fire Code Official: Building Code Definition
Fire Code Official — IFC 2009 definition: The fire chief or other designated authority charged with the administration and enforcement of the code …
- Fire Damper: Building Code Definition
Fire Damper — IBC 2009 definition: A listed device installed in ducts and air transfer openings designed to close automatically upon detection …
- Fire Detector, Automatic: Building Code Definition
Fire Detector, Automatic — IBC 2009 definition: A device designed to detect the presence ofa fire signature and to initiate action.
- Fire Door Assembly: Building Code Definition
Fire Door Assembly — IBC 2009 definition: Any combination of a fire door, frame, hardware and other accessories that together provide a specific …