Building Code Glossary
Ceiling Radiation Damper: Building Code Definition
How the IBC 2009, IMC 2009 define ceiling radiation damper, where the wording differs, and which chapters depend on the term.
On this page
Last updated September 7, 2026 · Definitions quoted from the 2009 International Codes as transcribed in this site's building-codes collection, with the source chapter linked for each quotation. Usage counts are computed over the chapters hosted here, one copy per code. The [ICC code library](https://codes.iccsafe.org/codes) publishes the current model text and the [ICC adoption maps](https://www.iccsafe.org/advocacy/code-adoption-maps/) show which edition a jurisdiction has adopted; those sources control.
Direct answer
Ceiling radiation damper is a defined term in the International Building Code (IBC) 2009, in Fire and Smoke Protection Features. The code's own words are: “A listeddevice installed in a ceiling membrane of a fire-resistance-rated floor/ceiling or roof/ceiling assembly to limit automatically the radiative heat transfer through an air inlet/outlet opening.” The IMC 2009 defines the same term with different wording, so the controlling text depends on which code governs the question in front of you — the comparison below sets the versions side by side. The term is used in 4 chapters of this corpus, most often in Duct Systems (IMC 2009), Fire and Smoke Protection Features (IBC 2009), Definitions (IBC 2009). These pages transcribe the 2009 model text; verify the definition against the edition and amendments your authority having jurisdiction has adopted.
Content and cited inputs reviewed by Scott Barrington, Harth founder and architectural technology specialist · Published 2026-09-07 · Updated 2026-09-07.
What does this term mean?
Ceiling Radiation Damper — IBC 2009, Fire and Smoke Protection Features:
A listeddevice installed in a ceiling membrane of a fire-resistance-rated floor/ceiling or roof/ceiling assembly to limit automatically the radiative heat transfer through an air inlet/outlet opening.
What must be verified before using this guidance?
Two of the I-Codes in this corpus define Ceiling Radiation Damper, and the wording is not identical — read the version that governs your question.
| Code | Where it is defined | Definition |
|---|---|---|
| IBC 2009 | Fire and Smoke Protection Features | A listeddevice installed in a ceiling membrane of a fire-resistance-rated floor/ceiling or roof/ceiling assembly to limit automatically the radiative heat transfer through an air inlet/outlet opening. |
| IMC 2009 | Definitions | A listed device installed in a ceiling membrane of a fire-resistance-rated floor/ceiling or roof/ceiling assembly to limit automatically the radiative heat transfer through an air inlet/outlet opening. |
Where ceiling radiation damper is used in the code
The term appears in 4 chapters of the 2009 I-Codes hosted here. The chapters that lean on it hardest are the ones to read next.
| Chapter | Code | Mentions |
|---|---|---|
| Duct Systems | IMC 2009 | 33 |
| Fire and Smoke Protection Features | IBC 2009 | 19 |
| Definitions | IBC 2009 | 1 |
| Definitions | IMC 2009 | 1 |
The term in use
How the code actually writes about ceiling radiation damper, quoted from the 2009 text hosted here:
The operating temperature of a ceiling radiation damper actuation device shall be 50°F (28°C) above the normal temperature within the duct system, but not less than 160°F (71 DC).
The operating temperature of a ceiling radiation damper actuation device shall be 50°F (27.8°C) above the normal temperature within the duct system, but not less than 160°F (71°C).
The terms ceiling radiation damper is built out of
The definition above leans on 3 other defined terms. Each carries its own code definition, and a local amendment to any of them changes what ceiling radiation damper covers:
- Listed — IBC 2009: Equipment, materials, products or services included in a list published by an organization acceptable to the code official and concerned with evaluation of products or services that maintains periodic inspection of production of listed equipment or materials or periodic evaluation …
- Outlet — IRC 2009: A point on the wiring system at which current is taken to supply utilization equipment.
- Device — IRC 2009: Aunit of an electrical system that carries or controls electrical energy as it principal function.
Ceiling Radiation Damper: what to open, and in what order
Every row is a document this term depends on. The ICC code library and the ICC adoption maps cover the middle rows.
| Check | Where | Confirmed |
|---|---|---|
| Read the definition in the adopted IBC | Fire and Smoke Protection Features | |
| Read the definition in the adopted IMC | Definitions | |
| Re-check the requirement that uses it | Duct Systems (IMC 2009) | |
| Re-check the requirement that uses it | Fire and Smoke Protection Features (IBC 2009) | |
| Re-check the requirement that uses it | Definitions (IBC 2009) | |
| Re-check the requirement that uses it | Definitions (IMC 2009) | |
| Confirm the dependent definition | Listed | |
| Confirm the dependent definition | Outlet | |
| Confirm the dependent definition | Device | |
| Local amendment to any of the above | Jurisdiction's amendment list |
A research aid, not a code determination. The authority having jurisdiction decides which edition and which amendments apply.
Where can you explore related guidance?
- Explore all glossary guidance
- Outlet: Building Code Definition
- Listed: Building Code Definition
- Device: Building Code Definition
Sources and method
Definitions quoted from the 2009 International Codes as transcribed in this site's building-codes collection, with the source chapter linked for each quotation. Usage counts are computed over the chapters hosted here, one copy per code. The ICC code library publishes the current model text and the ICC adoption maps show which edition a jurisdiction has adopted; those sources control.
Source links
Frequently asked questions
What is the code definition of ceiling radiation damper?
The International Building Code (IBC) 2009 defines it in Fire and Smoke Protection Features as: “A listeddevice installed in a ceiling membrane of a fire-resistance-rated floor/ceiling or roof/ceiling assembly to limit automatically the radiative heat transfer through an air inlet/outlet opening.” The 2009 model text is reproduced here; the definition that binds your project is the one in the edition your jurisdiction has adopted, as amended locally.
Do the I-Codes define ceiling radiation damper the same way?
No. IBC 2009, IMC 2009 all define the term, but the wording is not identical, and a difference in wording can change which requirements are triggered. The comparison table above sets the versions side by side so you can read the one that governs your question.
Which parts of the code depend on ceiling radiation damper?
In this corpus the term is used across 4 chapters, led by Duct Systems in the IMC 2009. Those are the sections whose scope moves if the definition is amended locally, so read them together with Chapter 2 rather than on their own.
What is a ceiling radiation damper?
In the 2009 I-Codes hosted here it is a defined term rather than a description. The IBC 2009 states, in Fire and Smoke Protection Features: “A listeddevice installed in a ceiling membrane of a fire-resistance-rated floor/ceiling or roof/ceiling assembly to limit automatically the radiative heat transfer through an air inlet/outlet opening.” It is defined in IBC 2009, IMC 2009. Because it is a defined term, whatever the adopted edition says it means is what every section using it means — so check Chapter 2 of that edition and any local amendment before relying on this wording.
What is the difference between a fire damper and a ceiling radiation damper?
In the 2009 I-Codes hosted here it is a defined term rather than a description. The IBC 2009 states, in Fire and Smoke Protection Features: “A listeddevice installed in a ceiling membrane of a fire-resistance-rated floor/ceiling or roof/ceiling assembly to limit automatically the radiative heat transfer through an air inlet/outlet opening.” It is defined in IBC 2009, IMC 2009. It is not the same as Fire Damper, which the IBC 2009 defines separately as “A listed device installed in ducts and air transfer openings designed to close automatically upon detection of heat and resist the passage of flame. Fire dampers are classified for use in either static systems that …” Because it is a defined term, whatever the adopted edition says it means is what every section using it means — so check Chapter 2 of that edition and any local amendment before relying on this wording.
What are the requirements for smoke dampers in a building?
Building is a separate defined term. The IBC 2009 defines it as: “Any structure used or intended for supporting or sheltering any use or occupancy.” That is not the same as ceiling radiation damper, which the IBC 2009 defines as “A listeddevice installed in a ceiling membrane of a fire-resistance-rated floor/ceiling or roof/ceiling assembly to limit automatically the radiative heat transfer through an air inlet/outlet opening.” — read both before applying either, and confirm the wording in the edition your jurisdiction has adopted.
Related pages
- Cast Stone: Building Code Definition
Cast Stone — IBC 2009 definition: A building stone manufactured from portland cement concrete precast and used as a trim, veneer or …
- Ceiling Height: Building Code Definition
Ceiling Height — IRC 2009 definition: The clear vertical distance from the finished floor to the finished ceiling.
- Ceiling Limit: Building Code Definition
Ceiling Limit — IBC 2009 definition: The maximum concentration of an air-borne contaminant to which one may be exposed, as published in …
- Cell: Building Code Definition
Cell — IBC 2009 definition: A room within a housing unit in a detention or correctional facility used to confine inmates …
- Cement Plaster: Building Code Definition
Cement Plaster — IBC 2009 definition: A mixture of portland or blended cement, portland cement or blended cement and hydrated lime, masonry …
- Certificate OF Compliance: Building Code Definition
Certificate OF Compliance — IBC 2009 definition: A certificate stating that materials and products meet specified standards or that work was done in …