Updated 2026-09-07

Building Code Glossary

Detonation: Building Code Definition

How the IBC 2009, IFC 2009 define detonation, where the wording differs, and which chapters depend on the term.

On this page

Last updated September 7, 2026 · Definitions quoted from the 2009 International Codes as transcribed in this site's building-codes collection, with the source chapter linked for each quotation. Usage counts are computed over the chapters hosted here, one copy per code. The [ICC code library](https://codes.iccsafe.org/codes) publishes the current model text and the [ICC adoption maps](https://www.iccsafe.org/advocacy/code-adoption-maps/) show which edition a jurisdiction has adopted; those sources control.

Direct answer

Detonation is a defined term in the International Building Code (IBC) 2009, in Use and Occupancy Classification. The code's own words are: “An exothermic reaction characterized by the presence of a shock wave in the material which establishes and maintains the reaction. The reaction zone progresses through the material at a rate greater than the velocity of sound. The principal heating mechanism is one of shock compression. Detonations have an explosive effect.” The IFC 2009 carries the same definition word for word, so the term means the same thing in each. The term is used in 10 chapters of this corpus, most often in Use and Occupancy Classification (IBC 2009), Explosives and Fireworks (IFC 2009), Definitions (IFC 2009). These pages transcribe the 2009 model text; verify the definition against the edition and amendments your authority having jurisdiction has adopted.

Content and cited inputs reviewed by Scott Barrington, Harth founder and architectural technology specialist · Published 2026-09-07 · Updated 2026-09-07.

What does this term mean?

Detonation — IBC 2009, Use and Occupancy Classification:

An exothermic reaction characterized by the presence of a shock wave in the material which establishes and maintains the reaction. The reaction zone progresses through the material at a rate greater than the velocity of sound. The principal heating mechanism is one of shock compression. Detonations have an explosive effect.

Labeled code-term definition diagram: Detonation: Building Code Definition
How the IBC 2009, IFC 2009 define detonation, where the wording differs, and which chapters depend on the term.

What must be verified before using this guidance?

Two of the I-Codes in this corpus define Detonation, in identical words.

CodeWhere it is definedDefinition
IBC 2009Use and Occupancy ClassificationAn exothermic reaction characterized by the presence of a shock wave in the material which establishes and maintains the reaction. The reaction zone progresses through the material at a rate greater than the velocity of sound. The principal heating mechanism is one of shock compression. Detonations have an explosive effect.
IFC 2009Explosives and FireworksAn exothermic reaction characterized by the presence of a shock wave in the material which establishes and maintains the reaction. The reaction zone progresses through the material at a rate greater than the velocity of sound. The principal heating mechanism is one of shock compression. Detonations have an explosive effect.

Where detonation is used in the code

The term appears in 10 chapters of the 2009 I-Codes hosted here. The chapters that lean on it hardest are the ones to read next.

The term in use

How the code actually writes about detonation, quoted from the 2009 text hosted here:

Detonation of explosive materials or ignition of fireworks for testing purposes shall be done only in isolated areas at sites where distance, protection from missiles, shrapnel or flyrock, and other safeguards provides protection against injury to personnel or damage to property.

IFC 2009 §3305.8

Such fire hoses shall be connected to an approvedwater supply and shall be capable of being brought to bear on post-detonation fires anywhere on the site of the demolition operation.

IFC 2009 §1407.3

The terms detonation is built out of

The definition above leans on 1 other defined term. Each carries its own code definition, and a local amendment to any of them changes what detonation covers:

  • Explosive — IBC 2009: A chemical compound, mixture or device, the primary or common purpose of which is to function by explosion.

Detonation: what to open, and in what order

Every row is a document this term depends on. The ICC code library and the ICC adoption maps cover the middle rows.

CheckWhereConfirmed
Read the definition in the adopted IBCUse and Occupancy Classification
Read the definition in the adopted IFCExplosives and Fireworks
Re-check the requirement that uses itUse and Occupancy Classification (IBC 2009)
Re-check the requirement that uses itExplosives and Fireworks (IFC 2009)
Re-check the requirement that uses itDefinitions (IFC 2009)
Re-check the requirement that uses itOrganic Peroxides (IFC 2009)
Confirm the dependent definitionExplosive
Local amendment to any of the aboveJurisdiction's amendment list

A research aid, not a code determination. The authority having jurisdiction decides which edition and which amendments apply.

Sources and method

Definitions quoted from the 2009 International Codes as transcribed in this site's building-codes collection, with the source chapter linked for each quotation. Usage counts are computed over the chapters hosted here, one copy per code. The ICC code library publishes the current model text and the ICC adoption maps show which edition a jurisdiction has adopted; those sources control.

Frequently asked questions

What is the code definition of detonation?

The International Building Code (IBC) 2009 defines it in Use and Occupancy Classification as: “An exothermic reaction characterized by the presence of a shock wave in the material which establishes and maintains the reaction. The reaction zone progresses through the material at a rate greater than the velocity of sound. The principal heating mechanism is one of shock compression. Detonations have an explosive effect.” The 2009 model text is reproduced here; the definition that binds your project is the one in the edition your jurisdiction has adopted, as amended locally.

Which parts of the code depend on detonation?

In this corpus the term is used across 10 chapters, led by Use and Occupancy Classification in the IBC 2009. Those are the sections whose scope moves if the definition is amended locally, so read them together with Chapter 2 rather than on their own.

What are the new building codes in Georgia for 2026?

Building is a separate defined term. The IBC 2009 defines it as: “Any structure used or intended for supporting or sheltering any use or occupancy.” That is not the same as detonation, which the IBC 2009 defines as “An exothermic reaction characterized by the presence of a shock wave in the material which establishes and maintains the reaction. The reaction zone progresses through the material at a rate greater than the velocity of sound. The principal heating mechanism …” — read both before applying either, and confirm the wording in the edition your jurisdiction has adopted.

What does detonation mean?

In the 2009 I-Codes hosted here it is a defined term rather than a description. The IBC 2009 states, in Use and Occupancy Classification: “An exothermic reaction characterized by the presence of a shock wave in the material which establishes and maintains the reaction. The reaction zone progresses through the material at a rate greater than the velocity of sound. The principal heating mechanism is one of shock compression. Detonations have an explosive effect.” It is defined in IBC 2009, IFC 2009. Because it is a defined term, whatever the adopted edition says it means is what every section using it means — so check Chapter 2 of that edition and any local amendment before relying on this wording.

The AI-powered workspacefor architects.