Interiors & furniture

Dining table size & seating calculator

Work out the largest dining table your room takes, or the table size you need for a number of guests, with chairs and clearance drawn to scale.

Free to use & exportNo signupLocal processingImperial & metric

Loading the local tool…

How big a dining table do you need?

Allow 24 in (600 mm) of table edge for each diner and at least 36 in (900 mm) between the table and the wall. On those numbers a 36 × 60 in rectangular table or a 48 in round table seats 6, a 40 × 84 in table seats 8, and a 42 × 108 in table seats 10. A 36 × 60 in table needs a room about 11 × 9 ft; a 48 in round table needs about 10 × 10 ft.

This calculator works it out both ways. Choose Largest table for my room to find the longest table, the largest standard size and how many it seats once the clearance is kept on every side. Choose Table size for my guests to find the smallest table, and the smallest standard size, that seats your guests, and the room size it needs. Rectangular, oval, round and square tables are covered, with or without end seats.

The plan draws the room, the table, a chair at every place and the clearance zone to scale, so you can see whether chairs will hit the wall before you buy.

How to use the dining table size & seating calculator

  1. Choose Imperial or Metric. Room sizes switch between feet and metres, and table sizes and clearances between inches and millimetres.
  2. Pick what to Work out: the largest table for your room, or the table size for your guests.
  3. Enter the Room length and Room width, or the size of the dining zone in an open-plan room.
  4. Choose the Table shape and set the Clearance from table edge to wall: 36 in (900 mm) to sit down, 42–48 in (1,050–1,200 mm) where people walk behind seated diners.
  5. For the guests calculation, enter the Guests to seat.
  6. Set the Place width per diner: 24 in (600 mm) minimum, 30 in (750 mm) comfortable. For rectangular and oval tables, enter the Table width and choose End seats.
  7. Read the verdict, the standard table size, the seats and the clearance left at the ends and sides, check the plan, then download the PDF, CSV or SVG or copy a share link.

Worked example

Imperial: A 14 × 12 ft room with 36 in of clearance takes a table up to 96 in long. The largest standard size, 42 × 96 in, seats 8 at 24 in a place and leaves 36 in at the ends and 51 in at the sides.

Metric: A 4.2 × 3.6 m room with 900 mm of clearance takes a table up to 2,400 mm long. The largest standard size, 100 × 240 cm, seats 8 at 600 mm a place and leaves 900 mm at the ends and 1,300 mm at the sides.

What size table seats 4, 6, 8, 10 or 12?

These are the smallest standard sizes the calculator finds at 24 in (600 mm) a place, with one diner at each end of a rectangular table. At 30 in a place, which is more comfortable and suits armchairs, add roughly 12 in (300 mm) of length for every two diners. Round tables seat ⌊π × diameter ÷ place width⌋, so a 60 in round table seats 7 at 24 in a place and 8 at a squeeze.

Table size by number of seats at 24 in (600 mm) a place
SeatsRectangular (end seats)RoundSquareRoom for the rectangle with 36 in clearance
436 × 60 in (90 × 160 cm)36 in (90 cm)36 in (90 cm)11 × 9 ft
636 × 60 in (90 × 160 cm)48 in (120 cm)48 in (120 cm)11 × 9 ft
840 × 84 in (100 × 240 cm)72 in (180 cm)48 in (120 cm)13 × 9⅓ ft
1042 × 108 in (110 × 280 cm)Custom, about 77 inCustom, about 72 in15 × 9½ ft
12Custom, about 132 inCustom, about 92 inCustom, about 72 in17 × 9 ft

How much space do you need around a dining table?

The space that matters is from the edge of the table to the nearest wall or piece of furniture. A dining chair is about 18 to 22 in deep and needs room to slide back, so 36 in (900 mm) is the usual minimum for a diner to pull the chair out and sit down. Where people need to walk behind someone who is seated, such as on the kitchen side of the table or along a route through the room, allow 42 to 48 in (1,050 to 1,200 mm).

These are long-standing design rules of thumb rather than code requirements. Measure clearance to sideboards, radiators and door swings, not just to the wall, and add the clearance to both sides: a 36 in wide table with 36 in each side needs a room at least 9 ft (2.7 m) wide.

Clearance from the table edge
SituationClearanceMetric
Diner can pull out a chair and sit; nobody passes36 in900 mm
Someone can edge past a seated diner42 in1,050 mm
Someone can walk past a seated diner, or carry plates44–48 in1,100–1,200 mm
Wheelchair turning space beside the table60 in1,500 mm

Round, square, rectangular or oval?

A round table seats the most people for the floor it takes in a square room and everyone can see and talk to everyone else, but beyond about 60 in (1,500 mm) the far side is out of reach and the centre is wasted. A square table suits four, or eight on a large one, in a square room. A rectangular table is the most flexible for long rooms and big groups, and extending tables let you size it for everyday use and add a leaf for guests. An oval table seats the same as a rectangle along its sides, has no corners to bump into in a tight room, and loses the second seat at each end.

Width matters too. 36 to 42 in (900 to 1,100 mm) leaves room for place settings and serving dishes and still lets people talk across the table. Tables much wider than about 45 in (1,150 mm) make conversation and passing dishes awkward.

Worked example: the largest table for a 14 × 12 ft room

With 36 in of clearance on every side, a 14 × 12 ft room leaves 168 − 72 = 96 in of length and 144 − 72 = 72 in of width for the table. A 40 in wide rectangle can therefore be up to 96 in long. That seats ⌊(96 − 12) ÷ 24⌋ = 3 diners along each side and one at each end: 8 in all. The largest standard size that fits is 42 × 96 in, which also seats 8 and leaves 36 in at the ends and 51 in at the sides, enough for someone to walk behind the diners on the long sides.

In metric, a 4.2 × 3.6 m room with 900 mm of clearance takes a table up to 2,400 mm long. The largest standard size, 100 × 240 cm, seats 8 at 600 mm a place and leaves 900 mm at the ends and 1,300 mm at the sides.

Who it is for and when to use it

Buying a dining table

Find the largest standard table that fits the room with chairs pulled out, before you fall for one that does not.

Planning for guests

See what size table seats 6, 8 or 10, and whether an extending table needs a leaf for the holidays.

Laying out an open-plan room

Size the dining zone so the table, chairs and a walkway behind them fit beside the kitchen and living areas.

Choosing a shape

Compare round, square, rectangular and oval tables in the same room and see which seats the most.

Method, formulas & assumptions

Largest table: length = room length − 2 × clearance; width = your table width (round and square tables: room width − 2 × clearance). Guests: round diameter = guests × place width ÷ π; square side = ⌈guests ÷ 4⌉ × place width; rectangle or oval with end seats: length = ⌈(guests − 2 × end seats) ÷ 2⌉ × place width + 2 × 6 in (150 mm) for the corners; without end seats: ⌈guests ÷ 2⌉ × place width. Seats: round ⌊π × diameter ÷ place width⌋; square ⌊side ÷ place width⌋ per side; rectangle and oval ⌊(length − 2 × 6 in) ÷ place width⌋ per long side plus one seat per end (two on rectangles at least two places wide). Room needed = table + 2 × clearance each way. The table is laid along the room's longer side. Standard sizes are the common retail sizes in the selected unit system.

Imperial inputs are converted with exact factors (1 ft = 0.3048 m, 1 lb = 0.45359237 kg, 1 US gal = 3.785411784 L) before the calculation runs in SI, then results are converted back.

Common mistakes to avoid

  • Measuring to the wall and forgetting the sideboard, radiator or door swing. Clearance is to the nearest obstruction.
  • Allowing too little room behind chairs where people walk. 36 in lets a diner sit; 42–48 in lets someone walk past.
  • Counting seats by table length alone. Legs, pedestals and corners take space, and armchairs need about 30 in a place.
  • Choosing a very wide table for a narrow room. It eats the clearance and makes conversation harder.
  • Buying a round table over about 60 in. Beyond that, people cannot reach the middle or talk across it.
  • Forgetting the rug. A rug under the table should reach about 24 in beyond the edge on every side.

Scope & limits

A planning estimate from the clearance and place width you enter. The room is treated as an empty rectangle with the table centred; sideboards, doors, radiators and walkways through the room are not modelled, so measure clearance to the nearest obstruction rather than the wall. Table legs, pedestals and aprons change how many chairs fit in practice, and armchairs need about 30 in (750 mm) a place. Standard sizes vary by maker.

Frequently asked questions

What size table seats 6?

At 24 in (600 mm) a place, a 36 × 60 in rectangular table with one diner at each end seats 6, or a 48 in round table. At a more comfortable 30 in a place, a 36 × 72 in table or a 60 in round table.

How much space do you need around a dining table?

At least 36 in (900 mm) from the table edge to the wall or nearest furniture so a diner can pull a chair out and sit down, and 42 to 48 in (1,050 to 1,200 mm) where people need to walk behind seated diners.

What size table seats 8?

A 40 × 84 in (100 × 240 cm) rectangular table with end seats seats 8 at 24 in a place, and a 42 × 96 in table does so more comfortably. A 72 in round table seats 8 to 9.

What size dining table fits a 12 × 12 ft room?

With 36 in of clearance on every side, a 12 × 12 ft room takes a table up to 72 in long: a 36 × 72 in rectangle seats 6 and a 72 in round table seats 9. A 60 in round table seats 7 and leaves 42 in on every side, enough to walk behind the chairs.

How much table space does each person need?

24 in (600 mm) of table edge per person is the minimum for elbow room; 30 in (750 mm) is comfortable and suits armchairs. Each place also needs about 12 to 15 in (300 to 380 mm) of table depth for a place setting.

How many people does a 60 inch round table seat?

A 60 in round table has a circumference of about 188 in, so it seats 7 at 24 in a place and 6 at 30 in. Eight people fit at a squeeze, with less elbow room.

What is the standard dining table width?

36 to 42 in (900 to 1,100 mm) is standard. It leaves room for place settings and serving dishes and still lets people talk across the table.

Does the tool include the chairs?

Yes. It counts the chairs that fit at your place width, draws them on the plan, and keeps your clearance between the table edge and the walls so the chairs can be pulled out.

Do I need an account to download the result?

No. All calculations, local file processing and exports on this page are free, without an account.

Where are my inputs stored?

The tool keeps inputs in this browser tab. It does not upload them or create a cloud copy. Save or download anything you want to keep before leaving the page. Standard site analytics may operate independently of the tool.

Can I work in metric instead of imperial?

Yes. Use the Imperial / Metric switch above the inputs. Imperial (feet, inches, pounds, gallons) is the default; switching converts every dimensional field and result, and your choice is remembered across the free tools in this browser.

Further reading

In this category

Explore the room at eye level before anything is ordered.

Place furniture, fittings and lighting from Harth's object library, walk through the room in 3D and render it for your client, starting from a model you've already drawn. Downloaded results are yours to take with you.