Interiors & furniture

Kitchen island & aisle clearance calculator

Check the aisles around a kitchen island, the seating clearance behind stools, the largest island that fits and the work triangle against NKBA guidelines.

Free to use & exportNo signupLocal processingImperial & metric

Loading the local tool…

How much space a kitchen island needs

Leave at least 42 in (1,067 mm) between an island and the facing counter where one person cooks, and 48 in (1,219 mm) where two or more cook at once. Those are the work aisle widths in the National Kitchen & Bath Association (NKBA) Kitchen Planning Guidelines. An aisle nobody works in, such as a passage past the island to a door, needs a 36 in (914 mm) walkway, and the space behind island stools needs 32, 36 or 44 in depending on whether people walk behind seated diners.

This calculator takes the clear width between your counter faces, the room length and the island size, and checks every side of the island against the right one of those numbers. It tells you which aisle is short and by how much, the deepest and longest island the room can take with compliant aisles, how many 24 in (610 mm) seats fit along the island, the overhang those seats need for your counter height, and whether the sink, cooktop and refrigerator form a workable triangle.

The plan draws the island to scale between the counters, with the aisles dimensioned and any shortfall in coral. NKBA guidelines are recommendations rather than code: the IRC sets no minimum kitchen aisle, but accessible kitchens under the ADA and ICC A117.1 do, and the notes say where they differ.

How to use the kitchen island & aisle clearance calculator

  1. Choose Imperial or Metric. Room dimensions switch between feet and metres, and aisles, depths and overhangs between inches and millimetres.
  2. Enter the Clear width between counter faces, measured across the island from the front of the cooking-side counter to whatever faces the island on the other side, and the Room length along the island.
  3. Enter the Island length and the Island depth including overhang.
  4. Choose how many People cooking at once, and whether the island is centred or you want to Set the cooking-side aisle yourself.
  5. Set Opposite the island's far side to a perimeter work counter, or to a wall, table or walkway only.
  6. Choose the Island seating position, the Seating height and the Traffic behind seated diners, then enter the Seating overhang (knee space).
  7. Optionally enter the three Work triangle legs, centre-front to centre-front; leave all three at 0 to skip them.
  8. Read the verdict, the aisle checks and the plan, then download the PDF, CSV or SVG, or copy the result.

Worked example

Imperial: An 11.5 × 16 ft kitchen with a centred 7 ft × 42 in island leaves 48 in aisles: 6 in more than the 42 in one-cook work aisle and 4 in more than the 44 in clearance for walking behind three counter-height seats. The ends get 54 in, and 52 in is the deepest island that keeps both aisles.

Metric: A 3.5 m wide, 4.8 m long kitchen with a centred 2.1 m × 1,050 mm island leaves 1,225 mm aisles: 158.2 mm more than the 1,066.8 mm one-cook work aisle and 107.4 mm more than the 1,117.6 mm walk-past clearance behind three counter seats. The deepest island that keeps both aisles is 1,315.6 mm.

NKBA kitchen aisle and clearance guidelines

The NKBA guidelines measure aisles between the finished fronts of counters, tall cabinets and appliances, not between cabinet boxes or walls. A work aisle is one you stand in to cook, prep or clean up; a walkway is a passage through the kitchen. Behind island seating, the clearance is measured from the counter edge, so the overhang does not count towards it.

Where the aisle behind the stools is also a work aisle, for example with a sink run behind the diners, the calculator uses the larger of the work aisle and the seating clearance.

NKBA Kitchen Planning Guidelines used by the calculator
SpaceImperialMetricGuideline
Work aisle, one cook42 in1,067 mm6
Work aisle, two or more cooks48 in1,219 mm6
Walkway36 in914 mm7
One of two walkways that meet at right angles42 in1,067 mm7
Behind seated diners, no traffic32 in813 mm8
Behind seated diners, edging past36 in914 mm8
Behind seated diners, walking past44 in1,118 mm8
Work triangle leg / total4–9 ft / ≤ 26 ft1.2–2.7 m / ≤ 7.9 m3

How big a kitchen island can be

Work backwards from the aisles. With one cook and a work counter on both sides, the space between the perimeter counters must be the island depth plus 42 in plus 42 in. Add the two perimeter counters, usually about 25 in deep each with the top's overhang, for the wall-to-wall room width. A 24 in deep island with no seating therefore needs about 9 ft between counter faces, or roughly 13 ft 2 in wall to wall.

Length works the same way: the room length minus a 36 in walkway at each end, or the seating clearance at an end with stools. The calculator reports both limits for your inputs as the largest island depth and length.

Clear width needed between counter faces, by island depth (NKBA)
Island depthOne cook, work aisles both sides (42 + 42 in)Two cooks (48 + 48 in)One cook + stools, walk-past behind (42 + 44 in)
24 in (610 mm)9 ft (2.74 m)10 ft (3.05 m)9 ft 2 in (2.79 m)
36 in (914 mm)10 ft (3.05 m)11 ft (3.35 m)10 ft 2 in (3.10 m)
42 in (1,067 mm)10 ft 6 in (3.20 m)11 ft 6 in (3.51 m)10 ft 8 in (3.25 m)
48 in (1,219 mm)11 ft (3.35 m)12 ft (3.66 m)11 ft 2 in (3.40 m)

Island seating: overhang, stool spacing and space behind

NKBA Guideline 9 allows 24 in (610 mm) of counter length per seated diner and a knee space that gets shallower as the counter gets higher, because people sit more upright on a taller stool. The overhang is that knee space: at a standard 36 in counter, plan a 15 in overhang. Longer overhangs need brackets or a supporting end panel; check the countertop supplier's limit for an unsupported overhang.

The calculator counts whole 24 in seats along the island (or across its end), so a 7 ft island seats three, not three and a half.

Knee space and seats per island length (NKBA Guideline 9)
Counter heightKnee space (overhang)Width per seat
Table, 30 in (762 mm)18 in (457 mm)24 in (610 mm)
Counter, 36 in (914 mm)15 in (381 mm)24 in (610 mm)
Bar, 42 in (1,067 mm)12 in (305 mm)24 in (610 mm)
Seats on a 4 / 6 / 8 / 10 ft island—2 / 3 / 4 / 5

Worked example: an island with stools facing a work counter

An 11.5 ft (138 in) space between counter faces, 16 ft long, takes a 7 ft × 42 in island centred in the room. That leaves (138 − 42) ÷ 2 = 48 in on each side and (16 − 7) ÷ 2 = 4.5 ft, or 54 in, at each end. The cooking side needs a 42 in one-cook work aisle, so it has 6 in to spare. The far side has three counter-height stools with a work counter behind them and people walking past, so it needs the larger of 42 in and 44 in: 4 in to spare.

With those aisles, the deepest island the room can take is 138 − 42 − 44 = 52 in, and the longest is 16 ft − 2 × 36 in = 10 ft. If a second cook joins, the cooking side needs 48 in and the far side 48 in too, and the 48 in aisles exactly meet it. In metric, a 3.5 m space with a 1,050 mm deep island leaves 1,225 mm aisles, comfortably over 1,067 mm and 1,118 mm.

Who it is for and when to use it

Deciding whether an island fits at all

Enter the room and a minimum 24 in island to see whether the aisles work before you pay for a design, or whether a peninsula or a table suits the room better.

Sizing an island for seating

Find the overhang for counter or bar height, how many stools fit along the island, and whether the aisle behind them still works.

Checking a kitchen layout from a designer or showroom

Measure the plan and confirm every aisle against the NKBA numbers, including the far side that is easy to squeeze.

Planning for two cooks

Switch to two or more cooks to see what the 48 in aisles cost in island size.

Method, formulas & assumptions

Aisles = clear width between counter faces − island depth, split equally or with the cooking-side aisle you set; island ends = (room length − island length) ÷ 2. Requirements (NKBA Kitchen Planning Guidelines): work aisle 42 in (1,067 mm) for one cook or 48 in (1,219 mm) for two or more (Guideline 6); walkway 36 in (914 mm) (Guideline 7); behind seated diners 32 in with no traffic, 36 in to edge past, 44 in to walk past, measured from the counter edge (Guideline 8), and never less than the work aisle when a work counter is behind them; knee space 18, 15 or 12 in at 30, 36 or 42 in high, 24 in (610 mm) wide per seat (Guideline 9). Largest island depth = width − both required aisles; largest island length = length − both required end clearances; seats = ⌊island length ÷ 24 in⌋. Work triangle (Guideline 3): each leg 4–9 ft (1.2–2.7 m), total ≤ 26 ft (7.9 m).

Imperial inputs are converted with exact factors (1 ft = 0.3048 m, 1 lb = 0.45359237 kg, 1 US gal = 3.785411784 L) before the calculation runs in SI, then results are converted back.

Common mistakes to avoid

  • Measuring from cabinet boxes or walls. Aisles run between finished counter, appliance and tall cabinet fronts.
  • Counting the seating overhang as aisle. The clearance behind stools is measured from the counter edge, not the cabinet face.
  • Forgetting appliance doors. A dishwasher or oven door drops about 24 to 30 in into the aisle, so an aisle at the bare minimum can feel blocked when it is open.
  • Planning stools on the side of a work aisle without allowing for people walking behind them. Use the 44 in walk-past clearance where traffic passes.
  • Squeezing a long island so the ends become pinch points. Each end is a walkway and needs at least 36 in.
  • Leaving the work triangle to chance. A leg longer than 9 ft means extra walking; one shorter than 4 ft crowds two work centres together.

Scope & limits

NKBA guidelines are industry recommendations, not code; state or local codes and accessibility requirements may ask for more. Aisles are measured between finished counter, tall cabinet and appliance fronts with doors closed; appliance doors, handles and protruding hoods are not modelled. The island is a rectangle centred along the room; L-shaped, angled or curved islands, peninsulas and perpendicular walkways need a drawing. Outside North America, local guidance may differ.

Frequently asked questions

How much space should be between a kitchen island and the counter?

NKBA recommends at least 42 in (1,067 mm) between an island and the facing counter for one cook and 48 in (1,219 mm) for two or more cooks. An aisle that is only a passage needs 36 in (914 mm).

How big should a kitchen island be?

Size it from the room: the island depth can be the clear width between counter faces minus both required aisles, and the length the room length minus a 36 in walkway at each end. A practical minimum is about 24 in deep and 48 in long, and 36 to 42 in deep allows seating with an overhang.

What is the minimum kitchen width for an island?

With one cook, a 24 in island and work aisles on both sides, you need about 9 ft between counter faces, or roughly 13 ft wall to wall with standard 25 in counters. Seating or a second cook adds more.

How much overhang does a kitchen island need for stools?

NKBA Guideline 9 calls for a 15 in (381 mm) knee space at a 36 in counter, 12 in (305 mm) at a 42 in bar and 18 in (457 mm) at a 30 in table, with 24 in (610 mm) of length per seat.

How much space do you need behind island stools?

Measured from the counter edge, NKBA recommends 32 in (813 mm) when nobody passes behind seated diners, 36 in (914 mm) for people to edge past and 44 in (1,118 mm) for them to walk past.

How many stools fit at a kitchen island?

Allow 24 in (610 mm) per stool: a 6 ft island seats three and an 8 ft island four. Wider stools or armchairs need more.

What is the kitchen work triangle?

The path between the sink, cooktop and refrigerator. NKBA recommends each leg be 4 to 9 ft (1.2 to 2.7 m), measured centre-front to centre-front, with a total of no more than 26 ft (7.9 m), and that no leg cross an island by more than 12 in.

Is a 42 inch kitchen aisle required by code?

Not in a typical house: the IRC sets no kitchen aisle width, and 42 in is an NKBA recommendation. Accessible kitchens differ: the 2010 ADA Standards require 40 in between opposing elements in a pass-through kitchen and 60 in in a U-shaped kitchen.

Do I need an account to download the result?

No. All calculations, local file processing and exports on this page are free, without an account.

Where are my inputs stored?

The tool keeps inputs in this browser tab. It does not upload them or create a cloud copy. Save or download anything you want to keep before leaving the page. Standard site analytics may operate independently of the tool.

Can I work in metric instead of imperial?

Yes. Use the Imperial / Metric switch above the inputs. Imperial (feet, inches, pounds, gallons) is the default; switching converts every dimensional field and result, and your choice is remembered across the free tools in this browser.

Further reading

In this category

Explore the room at eye level before anything is ordered.

Place furniture, fittings and lighting from Harth's object library, walk through the room in 3D and render it for your client, starting from a model you've already drawn. Downloaded results are yours to take with you.