Interiors & furniture

Chandelier, pendant & lighting calculator

Size a chandelier for a room or dining table, find how high to hang it, work out how many pendants fit over an island and how far apart, and estimate the lumens a room needs.

Free to use & exportNo signupLocal processingImperial & metric

Loading the local tool…

What a chandelier size calculator does

The quick answer for a room: add its length and width in feet, and that number in inches is the chandelier diameter. A 14 × 12 ft room suits a fixture about 26 in across. Over a dining table, pick a fixture ½ to ⅔ as wide as the table and hang its bottom 30 to 36 in above the tabletop, plus about 3 in for each foot of ceiling above 8 ft. Over an island, space pendants about 24 to 30 in apart and hang them 30 to 36 in above the counter.

This calculator does those sums for you in three modes. For a room it gives the diameter, a fixture height in proportion to the ceiling, the longest drop that keeps 7 ft of headroom, and how many lumens the room needs for its use. For a dining table it gives the round and linear fixture size range, the hanging height and the chain or rod length. For an island it finds the most pendants that fit your size and spacing, lays them out evenly and draws them to scale.

These are the rules of thumb lighting manufacturers and designers use, so treat the ranges as a starting point and trust your eye on the final choice. A visually light, open fixture can go larger; a heavy, solid one may want to go smaller.

How to use the chandelier, pendant & lighting calculator

  1. Choose Imperial or Metric. Room sizes switch between feet and metres, fixture and table sizes between inches and millimetres, and brightness between footcandles and lux.
  2. Choose what the Light for is: a chandelier for a room, a fixture over a dining table, or pendants over an island.
  3. For a room, enter the Room length, Room width and Ceiling height, and pick the Room type (for brightness), or a custom Target illuminance.
  4. For a dining table, choose the Table shape and enter the Table width (or diameter), Table length, Table height, Ceiling height and the Fixture body height of the fixture you are considering.
  5. For an island, enter the Island length, Counter height, Ceiling height, Pendant diameter and Pendant body height, then the Minimum gap between pendants and Minimum island end to pendant centre you want.
  6. Read the recommendation, the size and height ranges, the drop and the to-scale elevation, then download the PDF, CSV or SVG.

Worked example

Imperial: A 14 × 12 ft living room suits a chandelier about 26 in across and 22.5–27 in tall, with 1,680–3,360 lm of light. Over a 72 × 40 in table under a 9 ft ceiling, choose a 20–26.7 in fixture (or a 36–48 in linear one) with its bottom 33–39 in above the table; three 12 in pendants fit a 96 in island at 36 in centres.

Metric: A 4.5 × 3.6 m living room suits a chandelier about 675 mm across and 563–675 mm tall, with 1,744–3,488 lm of light. Over a 1,800 × 1,000 mm table under a 2.7 m ceiling, choose a 500–667 mm fixture with its bottom 827–980 mm above the table; three 300 mm pendants fit a 2,400 mm island at 900 mm centres.

What size chandelier for a room?

Add the room's length and width in feet and use the total as the chandelier's diameter in inches. In metric, divide the length plus width by 12: a 4.5 × 3.6 m room gives 8.1 m ÷ 12 = 675 mm. For the fixture's height, allow about 2½ to 3 in per foot of ceiling height, so a 9 ft ceiling suits a fixture 22½ to 27 in tall.

In entries, hallways and living rooms people walk underneath, so keep the bottom of the fixture at least 7 ft (2.13 m) above the floor. On a standard ceiling that often leaves no room for a chain at all, which is why semi-flush fixtures are common below 9 ft. In a two-storey foyer the rule still gives the diameter; size up if the fixture will be seen from the floor above.

Chandelier diameter by room size (length + width rule)
RoomLength + widthChandelier diameter
10 × 10 ft (3 × 3 m)20 ft (6 m)20 in (500 mm)
12 × 12 ft (3.6 × 3.6 m)24 ft (7.2 m)24 in (600 mm)
14 × 12 ft (4.3 × 3.6 m)26 ft (7.9 m)26 in (660 mm)
16 × 14 ft (4.9 × 4.3 m)30 ft (9.2 m)30 in (760 mm)
20 × 16 ft (6 × 5 m)36 ft (11 m)36 in (915 mm)

How high to hang a chandelier over a dining table

Most lighting manufacturers put the bottom of the fixture 30 to 36 in above the tabletop under an 8 ft ceiling, and add about 3 in for each extra foot of ceiling height so the fixture stays in proportion to the room. That puts the light low enough to light the table and high enough to see across it.

For the width, choose ½ to ⅔ of the table width, and keep the fixture at least 6 in inside each long edge so nobody stands up into it. A long table can take a linear fixture ½ to ⅔ of its length, or two matching chandeliers at the third points. The chain or rod length is the ceiling height minus the table height, the hanging height and the fixture's own height.

Bottom of the fixture above the tabletop by ceiling height
Ceiling heightAbove the tableAbove the floor (30 in table)
8 ft (2.44 m)30–36 in (760–915 mm)60–66 in
9 ft (2.74 m)33–39 in (840–990 mm)63–69 in
10 ft (3.05 m)36–42 in (915–1,065 mm)66–72 in
11 ft (3.35 m)39–45 in (990–1,145 mm)69–75 in
12 ft (3.66 m)42–48 in (1,065–1,220 mm)72–78 in

How many pendants over a kitchen island?

Space pendants about 24 to 30 in apart, edge to edge, and keep the outer ones over the worktop, roughly 12 in or more in from each end. The calculator first tries equal zones, with each pendant centred in its own 1/n of the island, which looks most even. If the gap between pendants is too small, it pulls the outer pendants in to your minimum end distance and spaces the rest evenly, then reports the most pendants that fit.

As a guide, an 8 ft island takes three 10 to 12 in pendants or two larger ones, a 10 ft island takes three pendants of up to about 16 in, and a 12 ft island four. Hang them so the bottom is 30 to 36 in above the counter: low enough to light the work, high enough to keep sight lines open across the kitchen.

Pendants that fit an island (24 in gaps, 12 in from each end)
Island length10 in pendants12 in pendants16 in pendants
6 ft (72 in)222
8 ft (96 in)332
10 ft (120 in)333
12 ft (144 in)444

How many lumens does a room need?

Multiply the floor area by a target illuminance. One footcandle is one lumen per square foot, so a 14 × 12 ft living room at 10 to 20 fc needs about 1,680 to 3,360 lumens in total. In metric, multiply square metres by lux. The calculator's room types use common residential targets: 10 to 20 fc for living rooms and bedrooms, 20 to 30 fc for dining rooms, 30 to 40 fc for general kitchen light, 70 to 80 fc for bathrooms and 5 to 10 fc for hallways.

That total is the light that should reach the room from every source together, not the chandelier alone. Shades, dark walls and dust absorb some of it, so allow 20 to 40 % more lamp lumens, and add task lighting over worktops, desks and mirrors.

Who it is for and when to use it

Buying a dining chandelier

Turn the table size and ceiling height into a fixture size range and the chain length to order.

Planning island pendants

Find how many pendants of a given size fit an island, at what spacing, before the electrician sets the boxes.

Sizing an entry or living room fixture

Get a diameter in proportion to the room and check that a hanging fixture still leaves 7 ft of headroom.

Checking a lighting plan

Estimate the total lumens a room needs and compare it with the fixtures on the plan.

Method, formulas & assumptions

Room: diameter (in) = room length + width (ft), i.e. a twelfth of length + width in any unit; fixture height 2½–3 in per foot of ceiling; bottom at least 7 ft (2.13 m) above a walkway; light = floor area × target illuminance (1 fc = 1 lm/ft² = 10.76 lx). Dining table: diameter ½–⅔ of the table width, capped 6 in (150 mm) inside each edge; linear fixture ½–⅔ of the table length and 6 in short of each end; bottom 30–36 in above the table under an 8 ft ceiling plus 3 in per extra foot. Island: pendants in equal zones (centres at L/2n, spacing L/n) when the edge-to-edge gap meets your minimum, otherwise outer pendants at your minimum end distance and the rest evenly spaced; bottom 30–36 in above the counter. Drop = ceiling − surface height − hang height − fixture body height.

Imperial inputs are converted with exact factors (1 ft = 0.3048 m, 1 lb = 0.45359237 kg, 1 US gal = 3.785411784 L) before the calculation runs in SI, then results are converted back.

Common mistakes to avoid

  • Centring the dining chandelier on the room rather than the table. Hang it over the table, even if that means moving the box.
  • Choosing a fixture as wide as the table. Keep at least 6 in clear inside each edge.
  • Hanging pendants too high, so the light floods the room and the fixtures look disconnected from the island.
  • Placing the end pendants beyond the worktop, where people walk into them.
  • Forgetting the fixture's own height when ordering a chain or rod.
  • Relying on one chandelier for all the light in a room. Layer it with recessed, wall and task lighting.

Scope & limits

Designer rules of thumb from lighting manufacturers and retailers, not a lighting design or code check. Illuminance targets are common residential ranges loosely based on IES guidance; the lumen figure is light reaching the room, before fixture, shade and room-surface losses. It does not check fixture weight, ceiling box ratings, wiring, dimming, glare or energy codes.

Frequently asked questions

What size chandelier for a dining room?

Choose a fixture ½ to ⅔ as wide as the table and at least 12 in narrower overall. A 40 in wide table suits a chandelier about 20 to 27 in across, and a linear fixture over a 72 in table about 36 to 48 in long.

How high should a chandelier hang over a table?

Hang the bottom 30 to 36 in above the tabletop under an 8 ft ceiling, and add about 3 in for every extra foot of ceiling. Under a 9 ft ceiling that is 33 to 39 in.

How many pendants over an island?

Usually two or three. Allow about 24 to 30 in between pendants and keep the outer ones at least 12 in in from the ends. An 8 ft island fits three 12 in pendants at 36 in centres, or two larger ones.

How far apart should pendant lights be over an island?

About 24 to 30 in between the edges of neighbouring pendants. For even spacing, divide the island into equal zones and centre one pendant in each, or set the outer pendants 12 in or more from each end and space the rest evenly.

How do I calculate chandelier size for a room?

Add the room's length and width in feet; the total in inches is the diameter. A 14 × 12 ft room suits a 26 in chandelier. For height, allow 2½ to 3 in per foot of ceiling height.

How high should a chandelier be in an entryway or living room?

Where people walk underneath, keep the bottom at least 7 ft (2.13 m) above the floor. In a two-storey foyer, hang it at or near the second-floor level so it is centred in the window or space.

How many lumens do I need for a room?

Multiply the floor area in square feet by a footcandle target: about 10 to 20 for living rooms and bedrooms, 20 to 30 for dining rooms, 30 to 40 for kitchens and 70 to 80 for bathrooms. A 168 ft² living room needs about 1,700 to 3,400 lumens from all its lights.

Can a chandelier be too big?

Yes, if it crowds the table edge, blocks views across the room or leaves less than 7 ft of headroom where people walk. Open, airy fixtures can be larger than solid ones and still look right.

Do I need an account to download the result?

No. All calculations, local file processing and exports on this page are free, without an account.

Where are my inputs stored?

The tool keeps inputs in this browser tab. It does not upload them or create a cloud copy. Save or download anything you want to keep before leaving the page. Standard site analytics may operate independently of the tool.

Can I work in metric instead of imperial?

Yes. Use the Imperial / Metric switch above the inputs. Imperial (feet, inches, pounds, gallons) is the default; switching converts every dimensional field and result, and your choice is remembered across the free tools in this browser.

Further reading

In this category

Explore the room at eye level before anything is ordered.

Place furniture, fittings and lighting from Harth's object library, walk through the room in 3D and render it for your client, starting from a model you've already drawn. Downloaded results are yours to take with you.