Interiors & furniture

Rug size calculator

Find the right rug size for a living room, dining room, bedroom or hallway from your room and furniture, and the standard size that fits.

Free to use & exportNo signupLocal processingImperial & metric

Loading the local tool…

What size rug do you need?

For most living rooms with an 84 in (2.1 m) sofa, an 8 × 10 ft rug is right: it runs past both ends of the sofa and the front legs of every seat sit on it. A queen bed usually takes an 8 × 10 ft rug under its lower two-thirds, a king a 9 × 12 ft, and a dining rug needs to reach about 24 in (600 mm) beyond the table on every side so chairs stay on it when they are pulled out.

This calculator works that out for your room. Choose the room, enter its size, the floor border you want to keep and the furniture the rug has to frame, and it gives the ideal rug size for the placement you pick, the smallest standard size that meets it, how much floor shows around it, and the largest standard rug that still fits inside the border. The plan is drawn to scale so you can see the rug, the furniture and the border together.

The rules are the ones interior designers and rug retailers use, written down as numbers you can change. Imperial results use the common US sizes (5 × 8, 6 × 9, 8 × 10, 9 × 12 ft); metric results use the common European sizes (160 × 230, 200 × 290, 240 × 340 cm).

How to use the rug size calculator

  1. Choose Imperial or Metric. Room sizes switch between feet and metres, and furniture, border and gap sizes between inches and millimetres.
  2. Pick the Room: Living room, Dining room, Bedroom or Hallway runner.
  3. Enter the Room length and Room width. The room length is the wall the sofa, the bed's headboard or the table's long side runs along.
  4. Set the Floor border to the walls you want to keep. 18 in (450 mm) is the default; 12–24 in (300–600 mm) is typical.
  5. For a living room, choose the Rug placement and enter the Sofa length, Sofa depth and Seating area depth, measured from the back of the sofa to the back of the seats facing it.
  6. For a dining room, choose the Table shape, enter the Table length or diameter and Table width, and set Rug beyond the table edge, normally 24 in (600 mm).
  7. For a bedroom, choose the Bed size and Rug placement, and set Rug beyond each side of the bed. For a hallway, enter the Hallway length, Hallway width, Floor showing each side and Floor showing at each end.
  8. Read the recommended standard size, the ideal size and the floor left around the rug, check the plan, then download the PDF, CSV or SVG or copy a share link.

Worked example

Imperial: An 84 in sofa with facing seats in a 12 ft deep seating area needs a rug at least 8 × 7 ft for the front legs to sit on it. An 8 × 10 ft rug, with its 10 ft side along the sofa, leaves 36 in of floor all round a 16 × 14 ft room.

Metric: A 2,100 mm sofa with facing seats in a 3.6 m deep seating area needs a rug at least 2.4 × 2.0 m for the front legs to sit on it. The smallest standard rug is 200 × 290 cm, which leaves 1,050 mm of floor at the ends and 1,100 mm at the sides of a 5.0 × 4.2 m room.

Rug size by room

The table gives the size the calculator recommends for common furniture, assuming the room is large enough to keep an 18 in border. Seating depth is measured from the back of the sofa to the back of the chairs opposite. Where two sizes are shown, the first meets the rule and the second is the next size up, which designers often prefer when the room allows.

Recommended rug size by room and furniture (imperial)
Room and furniturePlacementRug size
Living room, 72 in sofa, 10 ft seating depthFront legs on the rug5 × 8 ft
Living room, 84 in sofa, 12 ft seating depthFront legs on the rug8 × 10 ft
Living room, 96 in sofa, 13 ft seating depthFront legs on the rug8 × 10 or 9 × 12 ft
Living room, 84 in sofa, 12 ft seating depthAll legs on the rug10 × 14 ft
Living room, 84 in sofa, 12 ft seating depthCoffee table only4 × 6 ft
Dining room, 36 × 72 in table (seats 6)24 in beyond the table8 × 10 ft
Dining room, 42 × 96 in table (seats 8)24 in beyond the table9 × 12 ft
Dining room, 48 in round table24 in beyond the table8 ft round
Hallway 42 in wide, 12 ft long5 in each side, 12 in at the ends2½ × 10 ft runner

What size rug for a queen, king, full or twin bed

A bedroom rug is there so your feet land on something soft when you get up, so what matters is how far it reaches beyond the sides of the bed: 18 in (450 mm) at the least and 24 in (600 mm) for a generous landing. Most people lay the rug under the lower two-thirds of the bed, starting just in front of the nightstands, which needs a smaller rug than putting the whole bed and the nightstands on it.

These sizes come from the calculator with US mattress sizes. A bed frame or upholstered headboard adds a few inches, so if the frame is much wider than the mattress, enter the extra in the side allowance.

Rug size by bed size (smallest standard size that meets the rule)
Bed (mattress)Lower two-thirds, 18 in each sideLower two-thirds, 24 in each sideWhole bed on the rug, 24 in each sideRunners either side
Twin, 38 × 75 in6 × 9 ft8 × 10 ft8 × 10 ftTwo 2½ × 8 ft
Full, 54 × 75 in6 × 9 ft8 × 10 ft9 × 12 ftTwo 2½ × 8 ft
Queen, 60 × 80 in6 × 9 ft8 × 10 ft9 × 12 ftTwo 2½ × 8 ft
King, 76 × 80 in8 × 10 ft9 × 12 ft9 × 12 ftTwo 2½ × 8 ft
California King, 72 × 84 in8 × 10 ft8 × 10 ft9 × 12 ftTwo 2½ × 8 ft

Front legs, all legs or a floating rug

Front legs on the rug is the usual living-room choice. The rug runs about 6 in (150 mm) past each end of the sofa and its front legs, and those of the chairs or sofa opposite, sit about 6 in onto it. It ties the seating together without needing a rug as big as the room. The calculator sizes it as sofa length + 12 in by seating depth − 2 × (sofa depth − 6 in), assuming the seats opposite are as deep as the sofa.

All legs on the rug suits large and open-plan rooms, where the rug marks out the living area as a room within a room. Every piece of seating sits on it with about 6 in of rug showing beyond the furniture, so it needs the biggest rug. Coffee table only is a floating rug between the seats: at least two-thirds of the sofa length, no longer than the sofa, and clear of the furniture. It works in small rooms and over good floors, but too small a floating rug makes a room look bitty, which is the most common rug mistake.

Standard rug sizes in feet and centimetres

Rugs are sold in a handful of standard sizes, and imperial and metric ranges do not line up exactly. The calculator searches the list for the unit system you choose, trying each size both ways round. Sizes vary by maker by an inch or two, so check the listed size before you order.

Common standard rug sizes
Imperial (US)Nearest metric (EU/UK)Typical use
3 × 5 ft80 × 150 cmEntry, bedside, under a small coffee table
4 × 6 ft120 × 170 cmFloating rug, small sitting area
5 × 8 ft160 × 230 cmSmall living room, under a twin or full bed
6 × 9 ft200 × 290 cmLiving room with a short sofa, queen bed (18 in sides)
8 × 10 ft240 × 340 cmMost living rooms, queen bed, 6-seat dining table
9 × 12 ft250 × 350 cmLarge living room, king bed, 8-seat dining table
10 × 14 ft300 × 400 cmAll legs on the rug, long dining tables
2½ × 8, 10 or 12 ft runner80 × 250, 300 or 350 cm runnerHallways, either side of a bed

Worked example: living room rug for an 84 in sofa

A 16 × 14 ft living room has an 84 in sofa, 36 in deep, facing two armchairs across a 12 ft deep seating area. With front legs on the rug, the rug must be at least 84 + 2 × 6 = 96 in (8 ft) long and 144 − 2 × (36 − 6) = 84 in (7 ft) deep. The smallest standard size that meets both is 8 × 10 ft, laid with its 10 ft side along the sofa. Inside an 18 in border the room could take up to 13 × 11 ft, so the 8 × 10 ft leaves 36 in of floor on every side, and a 9 × 12 ft would also fit.

In metric, a 2,100 mm sofa, 950 mm deep, in a 3.6 m seating area needs at least 2.4 × 2.0 m, so 200 × 290 cm is the smallest standard rug, leaving 1,050 mm at the ends and 1,100 mm at the sides of a 5.0 × 4.2 m room.

Who it is for and when to use it

Buying a rug online

Check the size against your actual room and furniture before ordering, instead of guessing from a product photo.

Planning a bedroom

See whether a queen or king bed needs an 8 × 10 or a 9 × 12 ft rug, and how much floor will show at the foot of the bed.

Zoning an open-plan room

Size an all-legs-on rug that marks out the living area, and check it still leaves a walkway to the walls.

Dressing a dining room

Make sure chairs stay on the rug when they are pulled back, for rectangular, oval and round tables.

Method, formulas & assumptions

Living room, front legs: length = sofa length + 2 × 6 in (150 mm); depth = seating depth − 2 × (sofa depth − 6 in). All legs: sofa length + 2 × 6 in by seating depth + 2 × 6 in. Coffee table only: at least two-thirds of the sofa length and no longer than the sofa, within 12 in (300 mm) of the open floor between the seats less 4 in (100 mm) each side. Dining: table + the chair allowance on every side. Bedroom (US mattress sizes): bed width + 2 × the side allowance, by two-thirds of the bed length (or the whole length) + the allowance; runners each side are 2 ft (600 mm) to the allowance + 6 in wide and two-thirds of the bed length to the bed length + the allowance long. Hallway: hallway less the side and end gaps. The room limit is the room less the floor border. The recommendation is the smallest standard size in both orientations that meets the rule inside the limit (the largest for floating rugs and runners), from the common retail sizes in the selected unit system.

Imperial inputs are converted with exact factors (1 ft = 0.3048 m, 1 lb = 0.45359237 kg, 1 US gal = 3.785411784 L) before the calculation runs in SI, then results are converted back.

Common mistakes to avoid

  • Buying a rug that is too small. A rug that floats in the middle of the room, touching none of the furniture, makes the room look smaller; when in doubt, go up a size.
  • Forgetting the chairs at the dining table. If the rug stops at the table edge, chair legs catch on it every time someone sits down.
  • Running the rug right up to the walls. Leave at least 8 in (200 mm) of floor, and ideally 12–24 in, so the rug reads as a rug and not as wall-to-wall carpet.
  • Measuring the room but not the furniture. The rule depends on the sofa, bed or table, so measure them, including frames and arms.
  • Ignoring doors and vents. Check that a door can swing over the rug and that floor vents and radiators are not covered.
  • Assuming metric and imperial sizes match. An 8 × 10 ft rug is 244 × 305 cm, which is not a standard metric size.

Scope & limits

Rules of thumb used by interior designers and rug retailers, not standards. The room is treated as an empty rectangle with the furniture centred (beds against the wall the room length runs along); doors, fireplaces, radiators, floor vents and furniture outside the group are not modelled. Standard sizes vary by retailer by a few inches or centimetres; check the actual size before you order. Bed sizes are US mattress sizes; frames add width and length.

Frequently asked questions

What size rug for a living room?

An 8 × 10 ft rug suits most living rooms with an 84 in sofa: it runs past both ends of the sofa and catches the front legs of the seating. A small room with a short sofa can take a 5 × 8 or 6 × 9 ft rug, and a large or open-plan room a 9 × 12 or 10 × 14 ft rug with all the furniture on it.

What size rug for a queen bed?

An 8 × 10 ft rug, with its 10 ft side across the bed, under the lower two-thirds of a queen bed gives about 30 in of rug at each side and over 3 ft beyond the foot. A 6 × 9 ft rug gives 24 in at the sides but only about 18 in beyond the foot, and a 9 × 12 ft rug fits the whole bed and the nightstands.

What size rug for a king bed?

A 9 × 12 ft rug, with its 12 ft side across the bed, under the lower two-thirds of a king bed leaves about 34 in of rug at each side. An 8 × 10 ft rug leaves about 22 in, which is enough if you are happy with a little less than the 24 in many designers aim for.

How much floor should show around a rug?

Most designers leave 12 to 24 in (300 to 600 mm) of bare floor between the rug and the walls, and at least 8 in (200 mm) in a tight room. The calculator keeps the border you enter and reports how much floor actually shows around the recommended rug.

How big should a rug be under a dining table?

At least 24 in (600 mm) beyond the table on every side, and 30 in (750 mm) is more comfortable, so chairs stay on the rug when they are pulled back. A 36 × 72 in table needs an 8 × 10 ft rug and a 42 × 96 in table a 9 × 12 ft rug.

Should the sofa legs be on the rug?

Either the front legs or all the legs. Front legs on the rug is the usual choice and connects the seating without needing a huge rug. All legs on suits large rooms. If none of the furniture touches the rug, it should be at least two-thirds the length of the sofa.

What size runner for a hallway?

Leave about 4 to 6 in (100 to 150 mm) of floor on each side and some floor at each end. A 36 in hallway takes a 2 ft wide runner and a 42 in hallway a 2½ ft runner; the length is the hallway length less the gaps at the ends.

Is a bigger rug always better?

Up to a point. A rug that is one size too big rarely looks wrong; one that is too small often does. Keep at least a narrow border of floor, and check doors, vents and furniture outside the group before choosing the largest size that fits.

Do I need an account to download the result?

No. All calculations, local file processing and exports on this page are free, without an account.

Where are my inputs stored?

The tool keeps inputs in this browser tab. It does not upload them or create a cloud copy. Save or download anything you want to keep before leaving the page. Standard site analytics may operate independently of the tool.

Can I work in metric instead of imperial?

Yes. Use the Imperial / Metric switch above the inputs. Imperial (feet, inches, pounds, gallons) is the default; switching converts every dimensional field and result, and your choice is remembered across the free tools in this browser.

Further reading

In this category

Explore the room at eye level before anything is ordered.

Place furniture, fittings and lighting from Harth's object library, walk through the room in 3D and render it for your client, starting from a model you've already drawn. Downloaded results are yours to take with you.