Interiors & furniture
Furniture fit & room layout calculator
Check whether a bed, sofa, dresser or a whole room of furniture fits with walkway clearances, and see one arrangement that works drawn to scale.
Loading the local tool…
Will this furniture fit in the room?
Enter the room size and each piece of furniture with the clearance it needs, and the calculator tells you whether everything fits at once and draws one arrangement that works, to scale. A 12 × 12 ft bedroom, for example, takes a queen bed with 24 in at the foot and both sides, two nightstands and a dresser with 36 in in front, and still keeps a 32 in door clear. The furniture covers about a third of the floor.
Most furniture fit checks compare one rectangle with the room. This one also checks each piece on its own, in both orientations, and then searches for an arrangement of all of them: items against a wall sit with their back to it, free-standing pieces keep clearance all round, and nightstands can sit beside the bed in its side clearance. Pieces never block another item's front clearance or the door, but walkways can be shared, because one aisle serves the bed and the dresser.
If the search fails, the result names the tightest item and says whether it fails on its own or only in combination, so you know whether to choose a smaller piece, trim a clearance or move something out of the room.
How to use the furniture fit & room layout calculator
- Choose Imperial or Metric. Room dimensions switch between feet and metres, furniture sizes and clearances between inches and millimetres.
- Enter the Room width and Room length, measured wall to wall inside the room.
- Pick the wall with the Door, then enter the Door offset from corner, the Door width and the Walkway inside the door. Choose No door to leave this out.
- Add one row per piece: an Item name, its Width along the front face and Depth front to back, then the Front clearance and Side clearance it needs.
- Set each item's Placement: Back against a wall for beds, sofas and dressers, Beside another item for nightstands and end tables, or Free-standing for a dining table or an ottoman.
- Read the layout verdict, the floor area covered and the per-item table, check the plan, then download the PDF, CSV or SVG or copy the result.
Worked example
Imperial: A 12 × 12 ft bedroom takes a 60 × 80 in queen bed with 24 in at the foot and both sides, two 24 × 16 in nightstands beside it and a 60 × 18 in dresser with 36 in in front, clear of a 32 in door: the furniture covers 46.17 ft², 32% of the 144 ft² floor.
Metric: A 3.6 × 3.6 m bedroom takes a 1,600 × 2,000 mm bed with 600 mm at the foot and both sides, two 500 × 400 mm nightstands beside it and a 1,500 × 450 mm dresser with 900 mm in front, clear of an 800 mm door: the furniture covers 4.275 m², 33% of the 12.96 m² floor.
How much clearance furniture needs
There is no building code for space around furniture, but designers and furniture makers use consistent rules of thumb. The figures below are typical starting points; enter larger clearances in a primary bedroom or for anyone using a walker or wheelchair, and smaller ones where a room is tight and the furniture is rarely used.
| Where | Typical clearance | Metric equivalent |
|---|---|---|
| Beside a bed, for getting in and making it | 24 in minimum, 30–36 in comfortable | 600–900 mm |
| At the foot of a bed | 24 in minimum, more if a dresser faces it | 600 mm+ |
| In front of a dresser, to open drawers and stand | 36 in | 900 mm |
| Main walkway through a room | 30–36 in | 750–900 mm |
| Sofa to coffee table | 14–18 in | 350–450 mm |
| Dining table edge to wall, to pull out a chair | 36 in minimum, 42–48 in to walk behind | 900–1,200 mm |
| Desk chair zone in front of a desk | 36 in | 900 mm |
Standard furniture sizes to start from
Measure the actual piece if you have it; listings usually give overall width, depth and height including arms, legs and headboards. These typical sizes are a starting point for planning before you buy. Bed frames, headboards and footboards usually add a few inches to the mattress size.
| Item | Imperial | Metric |
|---|---|---|
| Twin mattress | 38 × 75 in | 965 × 1,905 mm |
| Full (double) mattress | 54 × 75 in | 1,370 × 1,905 mm |
| Queen mattress | 60 × 80 in | 1,525 × 2,030 mm |
| King mattress | 76 × 80 in | 1,930 × 2,030 mm |
| California king mattress | 72 × 84 in | 1,830 × 2,135 mm |
| European beds | — | 1,400, 1,600 or 1,800 × 2,000 mm |
| Nightstand | 20–28 × 14–20 in | 500–700 × 350–500 mm |
| Dresser | 48–72 × 16–24 in | 1,200–1,800 × 400–600 mm |
| Three-seat sofa | 72–96 × 32–40 in | 1,800–2,400 × 800–1,000 mm |
| Six-seat dining table | 36 × 72 in | 900 × 1,800 mm |
What size room does a bed need?
Add the side clearance twice to the bed's width, and the foot clearance once to its length. With 24 in (600 mm) on both sides and at the foot, the room dimensions below are the minimum for the bed alone, measured to the mattress. Nightstands sit beside the bed in that side space; a dresser needs its own wall with 36 in in front, which can share the aisle at the foot or the side of the bed.
A king bed in a 10 × 12 ft room, for example, needs 124 in across for 24 in each side. With the headboard on the 10 ft wall that leaves only 22 in each side; on the 12 ft wall it leaves 34 in each side and 40 in at the foot.
| Bed | Width needed | Length needed |
|---|---|---|
| Twin, 38 × 75 in | 86 in (7 ft 2 in) | 99 in (8 ft 3 in) |
| Full, 54 × 75 in | 102 in (8 ft 6 in) | 99 in (8 ft 3 in) |
| Queen, 60 × 80 in | 108 in (9 ft) | 104 in (8 ft 8 in) |
| King, 76 × 80 in | 124 in (10 ft 4 in) | 104 in (8 ft 8 in) |
| California king, 72 × 84 in | 120 in (10 ft) | 108 in (9 ft) |
| 1,600 × 2,000 mm | 2,800 mm | 2,600 mm |
| 1,800 × 2,000 mm | 3,000 mm | 2,600 mm |
How the arrangement search works
The calculator places the largest piece first, then nightstands beside it, then the rest. For each piece it tries all four rotations at every candidate position: against each wall, in the corners, and lined up with the edges of the pieces and clearance zones already placed. It keeps the valid position that scores best and moves on. If a piece will not go anywhere, it starts again with a different placing order and a different preference, such as filling from the top right instead of the bottom left, and repeats this a fixed number of times, so the same inputs always give the same plan.
A found arrangement proves the furniture fits. A failed search is strong evidence that it does not, but not proof, because the search does not try every possible position. The plan shows bodies as solid shapes with their front edge marked, front clearance as a dashed zone and side clearance as a lighter dashed zone, with the door swing and its walkway kept clear.
Worked example: a 12 × 12 ft bedroom
A queen bed is 60 × 80 in. With 24 in at the foot and both sides, its zone is 108 × 104 in, which leaves 36 in across and 40 in along a 144 in room on its own. The nightstands, 24 × 16 in, sit in the side clearance either side of the headboard. The 60 × 18 in dresser needs 36 in in front, so its zone is 60 × 54 in; the search puts it against the side wall, where its front clearance overlaps the aisle beside the bed. The 32 in door, 100 in along the right-hand wall, keeps a 36 in deep walkway clear.
The four pieces cover 46.17 ft², 32% of the 144 ft² floor, comfortably inside the rule of thumb of keeping a third to half the floor open. Swap the queen for a king, 76 in wide, and the bed needs 124 in across: it still fits, but the dresser has to move to the wall opposite the bed.
Who it is for and when to use it
Buying a bigger bed or sofa
Check that a king bed, sectional or dining table fits the room with walking space before you order, not after it arrives.
Planning a small bedroom or studio
Find out whether a bed, nightstands, dresser and desk all fit together, and which piece to downsize if they do not.
Moving house
Enter the new room's dimensions and the furniture you own to decide what comes with you and where it goes.
Early interior layouts
Test a furniture schedule against a room size during design, then place the pieces in a 3D model and walk the room at eye level once the arrangement works.
Method, formulas & assumptions
Each item is a rectangle (width along its front face × depth) with a clearance zone: front clearance in front, side clearance on both sides, no back clearance against a wall, and the side clearance all round when free-standing. On its own, an item fits when (width + 2 × side) ≤ room width and (depth + front + back) ≤ room length, or the same rotated 90°; spare = room dimension − zone dimension. The arrangement search places items one at a time, trying four rotations at every wall, corner and edge-aligned position next to the items already placed, and keeps the lowest-scoring valid position. Valid means: inside the room, bodies do not overlap each other, the door zone (door width × the larger of door width and walkway depth) or another item's front and back clearance; clearance zones may overlap each other; items set beside another item may stand in its side clearance. Several deterministic placing orders and position preferences are tried until every item is placed.
Imperial inputs are converted with exact factors (1 ft = 0.3048 m, 1 lb = 0.45359237 kg, 1 US gal = 3.785411784 L) before the calculation runs in SI, then results are converted back.
Common mistakes to avoid
- Measuring the mattress, not the bed. Frames, headboards and footboards add inches, and a sleigh bed can add a foot.
- Forgetting the door swing. A door opening into the room needs a clear quarter circle as wide as the door, plus a walkway in.
- Using the same clearance everywhere. A dresser needs room to open drawers and stand; a nightstand needs none.
- Ignoring windows, radiators and vents. A bed or dresser in front of a low window or a heater may fit on paper and not in practice.
- Checking only the room. A sofa that fits the room may not get through the front door or round the hallway corner.
- Filling the floor. A room where furniture covers more than about two-thirds of the floor will feel cramped even if every clearance is met.
Scope & limits
Rectangles on a rectangular floor. It does not check windows, radiators, vents, outlets, built-ins, sloped ceilings, item heights, drawer or door swings on furniture, or the route into the room. The arrangement is one valid option found by a search, not the best design, and a failed search does not prove that no arrangement exists. Clearances are rules of thumb you can change, not code requirements.
Frequently asked questions
Will a king bed fit in a 10 × 12 room?
Yes, with the headboard on the 12 ft wall: a 76 × 80 in king leaves 34 in on each side and 40 in at the foot. With the headboard on the 10 ft wall it leaves only 22 in on each side, slightly under the usual 24 in minimum.
How much space should be around a bed?
Allow at least 24 in (600 mm) on each side you get in from and at the foot. 30 to 36 in is more comfortable, and allow 36 in in front of a dresser that faces the bed.
Will a queen bed fit in a 10 × 10 room?
Yes. A 60 × 80 in queen leaves 30 in on each side and 40 in at the foot of a 120 in square room, enough for a nightstand each side. A dresser with 36 in in front is harder to add.
What is the minimum bedroom size for a queen bed?
With 24 in on both sides and at the foot, a queen needs about 9 ft across and 8 ft 8 in along the bed, before nightstands, a dresser or a door swing. Most designers suggest about 10 × 10 ft as a practical minimum.
How much walking space do you need between furniture?
30 to 36 in (750 to 900 mm) for main walkways through a room, about 24 in for minor paths such as beside a bed, and 14 to 18 in between a sofa and a coffee table.
How much of the room should furniture cover?
A common rule of thumb is to keep roughly a third to half of the floor open in living spaces. The calculator reports the share of the floor the furniture covers so you can compare.
Can the calculator find the best layout?
It finds one arrangement that meets every clearance, not the best design. Use it to prove the furniture fits, then arrange for light, views, outlets and how you use the room.
Does it check whether furniture fits through the door?
No. It checks the room only. Use the will-it-fit-through-the-door calculator to check doorways, hallway corners and stairs on the way in.
Do I need an account to download the result?
No. All calculations, local file processing and exports on this page are free, without an account.
Where are my inputs stored?
The tool keeps inputs in this browser tab. It does not upload them or create a cloud copy. Save or download anything you want to keep before leaving the page. Standard site analytics may operate independently of the tool.
Can I work in metric instead of imperial?
Yes. Use the Imperial / Metric switch above the inputs. Imperial (feet, inches, pounds, gallons) is the default; switching converts every dimensional field and result, and your choice is remembered across the free tools in this browser.
Further reading
- Harth for interior projects
- Egress and corridor widths
- All interiors & furniture tools
- All free architecture & construction tools
- Harth resource library
In this category
Explore the room at eye level before anything is ordered.
Place furniture, fittings and lighting from Harth's object library, walk through the room in 3D and render it for your client, starting from a model you've already drawn. Downloaded results are yours to take with you.